Philips EL2 User Manual

EL2 Series

6 V, 12 W ARCHITECTURAL EMERGENCY LIGHTING

Page 1 of 2

EL2WN

6.7"

(17.0 cm)

6.4"

(16.3 cm)

2.5"

(6.4 cm)

Features

Illumination: Two rotatable

reflector assemblies with

adjustable beam patterns. Unit

includes 6 VDC, 6 W halogen

lamps housed in impact-

resistant lamp covers*.

* Replacement lamping: No. 784, T2.25,
G-4 two pin base , 6 V, 6 W miniature
lamp.

Housing: Impact-resistant,

injection-molded UL 94-5VA

flame retardant thermoplastic

housing. UV-stabilized to resist

discoloration. White finish is

standard, black is optional. Unit

is ceiling or wall mountable.

Battery: Maintenance free,

sealed nickel metal hydride

battery with 10 year life.

NiMH battery is a non-toxic,

environmentally friendly

product which is recyclable.

Electronics: 120/277

VAC dual voltage input.

Microprocessor controlled

charge, transfer, and

monitoring system. Charging

system is complete with

low voltage disconnect,

AC lockout, and brownout

protection. Includes an AC

indicator/systems status lamp

and manual test switch.

Self-Testing Diagnostics

(standard): Unit runs an

internal test every five seconds

for secondary voltage, charge

current, battery voltage, and

LED illumination. Performs

automatic 1 minute discharge

test every 30 days and

30 minute discharge test

every 180 days meeting and

exceeding UL 924 and NFPA

101 requirements. The infrared

option allows a remote control

to initiate a 5 second and 30

minute self-test in addition to

the standard 1 minute and 90

minute manual test capability.

Electrical Specifications:

(120 VAC) .103 A, 11.3 W

(277 VAC) .044 A , 11.6 W

Code Compliance

UL 924 listed. NFPA 101

illumination standards.

Warranty

Three year full electronics

warranty. Five year full plus

five year prorated battery

warranty.

Job Information Type:

Job Name:

Cat. No.:

Notes:

6 V, 12 W ARCHITECTURAL EMERGENCY LIGHTING

Ordering Information

EL2

Series

EL2 = Thermoplastic
Emergency Unit

Accessories (order as a separate item)
IREMOTE = Infrared Remote Control

Note

1) For use with remote control which is ordered separately.

Housing Color

W = White
B = Black

N

Battery

N = NiMH

Factory Installed Options

I = Infrared Remote Sensor
TD = Time Delay

EL2 Series

Page 2 of 2

1

Philips Lightolier
e: [e-mail]
t: [phone]
w: www.lightolier.com

EL2 Series September 19, 2011

Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2011. All rights reserved.

Job Information Type: