l This video recorder is used on 110V-240V AC and connected to the ground. Confirm
the voltage before using.
l No using the machine for a long time, cut off the machine power supplies, and pulls
out the plug from the AC outlet.
Caution
l There are two modes of video output: one is BNC, and the other is VGA. They can
be switched over via STEP key.The default output is BNC. Link the lines, power on
the Recorder, after the clock on VFD of the front block goes, press STEP key, then
VGA will have output. Do not power on the monitor before powering on the
recorder
Switch on and shut down
l Check out the connection of system and power.
l Normally stop recording and playing at first, thenshut off the power.
Safety
l This machine is an indoor equipment .In order to avoid the short circuit or
danger, don’t put it in rain or damp environment.
l If any solid or liquid entered, please shut off the power immediately, and ask the
qualified person for technical check before restarting it.
l It is a precise machine, so there is nothing inside user can mend himself.
Anything wrong, please ask the qualified person or contact with the seller.
l Stop playing or recording while replacing it, otherwise HDD or parts will be
destroyed.
Install machine
l Place the machine in a well-ventilated area. Make sure that there is enough
space around the machine so that the vents are not blocked.
l Do not place the machine nearby the source of heat, or in direct sunlight and wet
environment.
Install HDD
Line jump: Before installing, find out the method of installation in HDD or the user guide,
check the way is right or not.
Data line: check whether the link of date line is correct, the link of HD must be
inserted into the bottom parallel.
l 1HDD Installation: Jump HDD as the master, plug IDE line into the first IDE slot
near the front panel, connects the power cable and the data line with HDD then.
l 2 HDDs Installation: set one jump to the master and the other to the slave,
connect the same team connect power line and material line to each one.
CLEAR HDD
l When you use new HD, you should format the HD before the operation of clearing.
i
PDF 文件使用 "pdfFactory Pro" 试用版本创建www.fineprint.cn
The correct order is as follow: clear assistant disc→clear master disc→out setting
→save→turn off→restart→ other setting.
Advice
l Record the television program or program of VCD/ DVDs, please remember
absolutely not to infringe on the right of work power and others of the third parties.
ii ii
PDF 文件使用 "pdfFactory Pro" 试用版本创建www.fineprint.cn
The characteristic and
the function of this video recorder
Characteristic:
l Use PHILIPS (PNX1500 CMOS DSP chip), offer more high compression and
definition.
l The PSOS that separate from PC completely is used.
l Start quickly, auto protects and auto resume.
l The operation is in brief; use convenience, and the operation are similar with
VCR.
Function:
System mode
l Professional operate system PSOS, escape from the PC completely, avoid
the calculator virus infection completely, good stability, no delay.
l The independent module design, the system is more stable.
l Operate the language can cut over, supporting various languages
Compression
l Adopt the MPEG4/ H.264 operation method carries on the compression;the
solution presses the processing, higher definition.
l The audio adopt the calculate way of G.729 compresses, having the higher
audio result.
l Synchronous compression of the audio and video.
l Fix code and variable code compression.
VISION
l 4-channel video inputs, 2-channel audio inputs, 1 BNC output.
l 100fps (PAL)/120fps (NTSC) (QUAD), full-time compression.
l Support images display at the same time, or one by one.
l Support the alert switch to single image function
l Adjustable Live/Playback image contrast, brightness, and saturation.
l Each image name can be selected.
RECORDING
l 4-channel video, 2-channel audio record.
l High definition in image, also can be adjust from CIF to 1/2CIF,
fixation/variable code setting.
l Video and audio record at the same time, the parameter of each channel can
be setting singly; a numeral from 0.1 pieces/ seconds-30 the pieces/ seconds
can adjust.
l Recording Mode: Manual, Auto, Alert, and Motion detect.
l 8 menus in image also can set the code flow by operator.
Motion and detect
l Each image can set 16 dynamic states to detect the district
l Each image can set 1-7 the intelligent degree.
Saving
l Install big capacity HDD, Unlimited capacity of HDD, unlimited rotate speed.
i
PDF 文件使用 "pdfFactory Pro" 试用版本创建www.fineprint.cn
l Overwrite
l Auto alert setting for surplus content.
l Record before alert function, store in EMS memory
l Dormancy function is set to reduce the quantity of heat and prolong the use.
Search
l Search on time/date/list/exact.
l Search on 1 HD singly, also display the list corresponding.
l Normal/alert record search.
l Dairy
Replay
l More images play at the same time, requesting no sound output while having
another image.
l Single video and audio play at the same time.
l PLAY function: forward, review, pause, single, upside, downside, head segment,
whist.
Edition information
l Type, the edition number, date of edition
l Host capacity, recording information (normal/alert), and recording time.
l Work disc, way of cover and time
VFD vision
l Time, record mark, image quality mark, guard mark, the scheduling
symbolize, HDD read and write mark, play, forward, network mark, alert and
channel mark, pause.
Water Mark (optional)
l can increase the false defend mark according to the customer.
Alert
l 4 alert inputs/2 alert outputs
l The time of alert output can be set.
l The type of alert input NC/NO can be set.
l Alert can be cleared in such way: manual, remote control and network.
l Buzzer off/on can be set.
l Video shade or lost alert function.
Network Function
l Support 10/100M TCP/IP
l The privileged person can change the parameter of video and control in
center through network control software.
l IE browser (file name: IE Play)
l Down cope certify through network control software.
l Support WEB skim
SAVE PROTECT
l Adopt 128 data encrypt
l 3 grade passwords protection, manager password, user password, and
operator password.
User interface ports
l Graphic interface ports, the operation keeps simple, convenient
ii ii
PDF 文件使用 "pdfFactory Pro" 试用版本创建www.fineprint.cn
l Front panel control
l IR remote control.
l Network control
1. Display of running state...........................................................................26
2 Time / date display...................................................................................26
3.basic function display...............................................................................26
4.vision of HDD running..............................................................................27
5.vision of switch on...................................................................................27
Function of P.T. Z 27
standard and para 28
external dimension 29
Exterior size 29
package contents 29
v
PDF 文件使用 "pdfFactory Pro" 试用版本创建www.fineprint.cn
front of the panel map
VFD
System connection
VFD
USB Video Out
Remote
Audio Out
Power
Menu
1 Alert LED ○8 Network
○
2 Timming LED ○9 Quality
○
3 Date ○10 Record
○
4 Time ○11 Play
○
5 P .T. Z ○12 Step
○
6 Alert ○13 Review
○
7 HDD ○14Forward
○
1
PDF 文件使用 "pdfFactory Pro" 试用版本创建www.fineprint.cn
Back panel and connection terminal
② ③ ⑤ ⑥ ⑧ ⑨ ⑩ ④ ⑦
①
① Audio input 1,2,3,4
② Audio output 1,2
③ Video input 1,2,3,4
④ Video output 1,2
⑤ VGA interface
⑥ Net connect RJ45
⑦ RS232 interface
⑧ Alert input/output signal and RS-485 signal terminal. the order from left
to right is: alert output 1,2;alert input 1,2,3,4;earth;RS-485
⑨ Fan base
⑩ Power line plug
2
PDF 文件使用 "pdfFactory Pro" 试用版本创建www.fineprint.cn
System operation
1. Record operation
Record operation can be divided into Manual, Auto, Alert, Motion detect,
and the combination operation of above.
Manual
l “ record setting”, Press button “quantity ” .
l press “=” start record, 4-channel start record at the same time,
the mark of record appear on the VFD and monitor.
l manual belong to the normal record.
l Press “=” stop manual record.
Alert Record
l The parameter in" the alert records image the enactment".( the
related system setting chapter for details see)
l Press "guard" make the system be placed in the warning.
l The alert record can start with motion and detect. If you want to
use this function, please choose the window of “motion and detect”
on the list in advance, and setting “alert”. .
l The alert record can stop after press “record” button only.
l The length of alert record is confirmed by “TIME BEFORE”“TIME
AFTER”.
l While recording, there is a red signal on the left of VFD and
monitor. The buzzer won’t stop until press “clear”.
Motion Detect
l Setting the parameter in” Motion Detect” column.
l Starting the detect record must press the “guard” before, but there
is any other operation before the normal detect record.
l The time of normal detect is decided by “record time” in motion
setting; the time of alert record is decided by “alert record setting” in
“before/after alert”.
Scheduling record
l Setting the parameter of scheduling record in "the setting
scheduling" column.
l Press" scheduling" on the front panel,the signal “¹ ”will show on
3
PDF 文件使用 "pdfFactory Pro" 试用版本创建www.fineprint.cn
the left of the VFD display area and screens
l Press" scheduling “and input manager's password to cancel the
scheduling of record.
Combination record
l The combination record can be use according to need. Such as
the scheduling detects record, it needs to combine the scheduling
record setting and detect record setting.
2. Play/ search
You can use IE browser software or one to one specific software.
1. one-one specific display software:
l Play, Press “4” on the front panel to play, the signal will show
on the left top corner of the VFD and screen. Press it again to stop
running, and the signal disappears.
l The image played is always the one that stopped last time or
recorded recently.
l It can play one by one. Press “play” again will play normally. The
forward/review button can turn the speed, press “play” will renew.
l Press up and down can choose the segment of same type. A
head and a tail operation can repeat.
l 4 images can replay at the same time or either one image replays
in full screen. The up, down, left, right button can choose single
image, press menu will renew.
l Searching play
4
PDF 文件使用 "pdfFactory Pro" 试用版本创建www.fineprint.cn
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.