Philips DVP3358K, DVP3358K-93 User Manual

Register your product and get support at
www.philips.com/welcome
DVP3358K
EN User manual
ZH_CN
用户手册
Contents
1 Important 4
Safety and important notice 4 Trademark Notice 5
6 Advanced features 24
Media copy 24 Create MP3 fi les 24
7 Adjust sound 26
Karaoke settings 26 Turn off vocal (cancel voice) 26
English
Contents
2 Your DVD player 6
Features highlight 6 Product overview 7
3 Connect 9
Connect video cables 9 Connect audio cables 10 Route audio to other devices 10 Connect USB device 11 Connect to power outlet 11
4 Get started 12
Prepare the remote control 12 Find the correct viewing channel 13 Select menu display language 13 Turn on Progressive Scan 14
5 Play 15
Play from disc 15 Play video 16 Play music 20 Play photo 21 Play from USB device 23
8 Adjust settings 27
General setup 27 Audio setup 28 Video setup 31 Preferences 32
9 Additional information 34
Update software 34 Care 34
10 Specifi cation 35
11 Trouble s hooting 36
12 Glossary 38
1 Important
Recycle notice
Safety and important notice
Warning
Risk of overheating! Never install the DVD player
in a confi ned space. Always leave a space of at least four inches ar ound the DVD player for ventilation. Ensur e the curt ains or other objec ts never cover the ventilation slots on the DVD player.
Never place the DVD player, remote control or
batteries near naked fl ames or othe r heat sources, including direct sunlight.
Only use this DVD player indoors. Keep this DVD
player away from water, moisture and liquid-fi lled objects.
Never place this DVD player on other electr ical equipment.
Keep away from this DVD player during lightning storms.
Where the mains plug or an appliance coupler is used as the disconnect device, the disconnec t device shall remain readily operable.
Visible and invisible laser radiation when open. Avoid exposure to beam.
About Progressive Scan
Consumers should note that not all high defi nition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 or 625 progressive scan picture problems, it is recommended that the user switch the connection to the ‘standard defi nition’ output. If there are questions regarding our TV set compatibility with this model 525p and 625p DVD player, please contact our customer service center.
This electronic equipment contains a large number of materials that can be recycled or reused if disassembled by a specialized company. If you are disposing of an old machine, please take it to a recycling center. Please observe the local regulations regarding disposal of packaging materials, exhausted batteries and old equipment.
Copyright notice
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Trademark Notice
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent#: #5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. All Rights Reserved.
Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/ or other countries.
© 1996-2008 DTS, Inc.
English
Important
DivX, DivX Certifi ed, and associated logos are trademarks of DivX, Inc. and are used under license.
Plays DivX
®
video with menus, subtitles and
audio tracks.
The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, Inc.
2 Your DVD
ALL
player
Create MP3 fi les
Convert your favorite audio tracks from an audio CD into MP3 format. The created MP3 les are saved in your USB fl ash drive.
Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers, register your product at www.philips.com/welcome.
This DVD player brings audio and video to life. Just plays practically any disc format, including the digital photos with absolutely no compromise to picture quality.
Features highlight
Screen fi t
View the movie in full screen on any TV with this DVD player.
Progressive scan component video
Pushes the limits of standard resolution and provides a more fi lm-like image display that is more pleasing for viewing DVDs on a TV display.
Karaoke scoring function
Karaoke scoring gives a score for each performance. Have your singing performance scored for even more karaoke fun at home!
Region codes
Your DVD player plays discs with the following region codes.
DVD region code Countries
China
Hi speed USB 2.0 link
Simply plug your USB fl ash drive into the USB jack to play your MP3/WMA/JPEG/DivX fi les to enjoy the music play in superb sound quality.
Media copy
You can transfer data fi les such as MP3, WMA and JPEG from disc to USB fl ash drive.
Product overview
Main unit
a (Standby-on)
Turn on the DVD player or switch to • standby mode.
b Disc compartment
c Display panel
d Z (Open/Close)
Open or close the disc compartment.
Remote control
English
1
2
3
4
5
31 2
4
7
6
5
6
7
8
9
10
18
17
16
15
14
13
12
11
Your DVD player
e u (Play/Pause)
Start, pause or resume disc play.
f (USB) jack
Connect a USB fl ash drive.
g MIC
Audio input from a microphone.
a (Standby-On)
Turn on the DVD player or switch to • standby mode.
b Z (Open/Close)
Open or close the disc compartment.
c DISC MENU
Access or exit the disc menu.
Switch to disc mode.
For VCD/SVCD, turn PBC (Playback • Control) on or off in PBC mode.
d v V b B (Navigation buttons)
Navigate through the menus.• Search fast-forward ( B) or fast-
backward (b). Press repeatedly to change the search speed.
Search slow-forward ( v) or slow­backward (V). Press repeatedly to change the search speed.
e BACK
Return to the previous display menu.
For DVD, navigate to the title menu.
For VCD version 2.0 or SVCD with • PBC turned on, return to the menu.
f / (Previous/Next)
Skip to the previous or next title, • chapter, or track.
Press and hold for fast-backward or • fast-forward search.
g (USB)
Switch to USB mode and display the • content.
m AUDIO/CREATE MP3
Select an audio language/channel.
Access the menu to create MP3.
n x (Stop)
Stop disc play.
o u (Play/Pause)
Start, pause or resume disc play.
p INFO
For disc, display the current status or • disc information.
For slideshows, display a thumbnail view • of photo fi les.
q OK
Confi rm an entry or selection.
r SETUP
Access or exit the setup menu.
h Numeric buttons
Select an item to play.
i SUBTITLE
Select DVD or DivX subtitle language.
Access the menu to USB copy or USB • delete.
j , ZOOM
Fit the picture format to the TV screen.
Zoom in or out of the picture.
k VOCAL
Change the audio channel of a karaoke • disc.
l KARAOKE
Access or exit the karaoke menu.
3 Connect
Make the following basic connections to use the DVD player.
Note
You must connect this DVD player direc tly to a T V.
English
Basic connections:
Video cables• Audio cables
Optional connections:
Audio to other devices:
Multi channel receiver
Digital amplifi er/receiver
Analog stereo system
Note
Refer to the type plate at the rear or bottom of the product for identifi cation and supply r atings.
Befor e you make or change any connections, ensure that all the devices are disconnec ted from the power outlet.
Tip
Different types of connectors may be used to connect this product to your TV, depending on availabili ty and your needs. A comprehensive interactive guide to help you connect your produc t is available at www.connectivityguide.philips.com.
Option 1: Connect to component video jacks
Pb
Pr
Y
Pr
Y
COMPONENT VIDEO OUT
Pb
COMPONENT
VIDEO IN
1 Connect the component video cables (not
supplied) to the Y Pb Pr jacks on this DVD player and the component video input jacks on the TV.
If a progressive scan TV is used, you • may turn on the progressive scan mode (see chapter ‘Turn on Progressive Scan’ for details).
Tip
The component video input jack s on the T V may be labeled as Y Pb/Cb Pr/Cr or YUV.
This t ype of connection provides good picture quality.
Connect
Connect video cables
Connect this DVD player to the TV to view disc play.
Select the best video connection that the TV can support.
Option 1: Connect to component video jacks (for a standard TV or Progressive Scan TV). Option 2: Connect to video (CVBS) jack (for a standard TV).
Option 2: Connect to video (CVBS) jack
VIDEO IN
1 Connect a composite video cable
(supplied) to the TV OUT jack on this DVD player and the video input jack on the TV.
Tip
The video input jack on the T V may be labeled as A/ V IN, VIDEO IN, COMPOSITE or BASEBAND.
This type of connection provides standard picture quality.
Route audio to other devices
Route the sound from this DVD player to other devices to enhance audio play.
Connect to multi channel receiver
MULTI CHANNEL
AUDIO IN
FRONT L
REAR L
CENTER
SUBWOOFER
REAR R
FRONT R
FRONT L
FRONT R
REAR L
REAR R
CENTER
SUBWOOFER
Connect audio cables
Connect the audio from this DVD player to the TV to allow sound output through the TV.
AUDIO IN
1 Connect the audio cables (supplied) to the
AUDIO OUT L/R jacks on this DVD
player and the audio input jacks on the TV.
10 EN
1 Connect the audio cables (not supplied) to
the AUDIO OUT (FRONT L/R, REAR L/R, CENTER and SUBWOOFER) jacks
on this DVD player and the audio input jacks on the device.
Tip
You can optimize the audio outpu t (see chapter ‘Adjust settings’ - [ Audio Setup ] > [ Analog Output ]) for details.
Connect to digital ampli� er/receiver
Connect USB device
DIGITAL IN
DIGITAL
OUT
COAXIAL
1 Connect a coaxial cable (not supplied) to
the COAXIAL/DIGITAL OUT jack on this DVD player and the COAXIAL/DIGITAL input jack on the device.
Tip
You can optimize the audio outpu t (see chapter ‘Adjust settings’ - [ Audio Setup ] > [ Digital Audio
]) for details.
Connect to analog stereo system
AUDIO IN
1 Connect the USB � ash drive to the
(USB) jack on this DVD player.
Note
This DVD player can only play/view MP3, WMA , DivX or JPEG � les that are s tored on such devices.
to access the content and play the � les.
Press
Connect to power outlet
Warning
Risk of product damage! Ensure that the power supply voltage cor responds to the voltage printed on the back or the under side of the DVD player.
English
Connect
1 Connect the audio cables (supplied) to the
AUDIO OUT L/R jacks on this DVD
player and the audio input jacks on the device.
Tip
You can optimize the audio outpu t (see chapter ‘Adjust settings’ - [ Audio Setup ] > [ Analog Output
]) for details.
1 Connect the power cord to the power
outlet.
The DVD player is ready to be set up
for use.
EN 11
4 Get started
Prepare the remote control
Navigate through the menu
1 Point the remote control directly at the
remote sensor on this DVD player and select the desired function.
1 Push to open the battery compartment
cover.
2 Insert two R03 or AAA type batteries with
correct polarity (/) as indicated.
3 Close the battery compartment.
Caution
Remove batteries if they are exhausted or if the remote control is not to be used for a long time.
Do not mix batteries (old and new or carbon and alkaline, etc.).
Batteries cont ain chemical subs tances. They should be disposed of f properly.
2 Use the following buttons on the remote
control to navigate through the on-screen menus.
Button Action
v V
b B
OK
Move up or down.
Move left or right.
Confi rm a selection.
Enter numbers.
12 EN
Find the correct viewing channel
Press to turn on the DVD player.
1 2 Turn on the TV and switch to the correct
video-in channel.
You may go to the lowest channel on • the TV, then press the Channel Down button on the TV remote control until you see the Video In channel.
You may press button repeatedly on the TV remote control.
Usually, this channel is between the • lowest and highest channels and may be called FRONT, A/V IN, VIDEO, etc..
Tip
See the TV user manual on how to select the correct input on the T V.
If the audio ou tput of this DVD player is routed to other audio device (such as audio system or receiver), turn on the audio device to the appropriate audio input channel. Refer to the device user manual for details.
Select menu display language
Press SETUP.
1
[ General Setup ] menu is displayed.
2 Select [ OSD Language ], then press B.
General Setup
Disc Lock
OSD Language
Sleep Timer
Auto Standby
DivX(R) VOD Code
English
The language options are different • depending on your country or region. It may not correspond to the illustration shown here.
3 Press vV to select a language, then press
OK.
Tip
You can set the default language for DVD audio and disc menu, see chapter ‘Adjust settings’ - [ Preferences ] for details.
English
Get started
EN 13
Loading...
+ 28 hidden pages