Philips DVP3350/58 User guide

Register your product and get support at
www.philips.com/welcome
DVP3350 DVP3354
EN User manual
CS PŏíruĈka pro uživatele
EL ƆƣƷƥƩƱƟƤƩƯ ƷƱƞƳƧƲ
HU Felhasználói kézikönyv
PL Instrukcja obsãugi
RO Manual de utilizare
SK PríruĈka užívateĸa
TR Kullanm klavuzu
ČESKA REPUBLIKA
SLOVAK REPUBLIC
Vystraha! Tento přístroj pracuje s laserovým paprskem. Při nesprávné manipulaci s přístrojem (v rozporu s tímto návodem) můże dojít k nebezpečnému ozáření. Proto přístroj za chodu neotevírejte ani nesnímejte jeho kryty. Jakoukoli opravu vždy svěřte specializovanému servisu.
Nebezpečí! Pří sejmutí krytů a odjištění bezpečnostních spínačů hrozí nebezpečí neviditel­ného laserového záření!
Chraňte se před přímým zásahem laserového paprsku.
Záruka: Pokud byste z jakéhokoli důvodu přístroj demontovali, vždy nejdříve vytáhněte sit’ovou zástrčku.
Přístroj chraňte před jakoukoli vlhkostí i před kapkami vody.
MAGYARORSZÁG
Prístroj sa nesmie používat’ v mokrom a vlhkom prostredí! Chránte pred striekajúcou a kvapkajúcou vodou!
Laser speci cation
Type: Semiconductor laser InGaAIP (DVD), • AIGaAs (CD) Wave length: 658 nm (DVD), 790 nm (CD)• Output Power: 7.0 mW (DVD), 10.0 mW • (VCD/CD) Beam divergence: 60 degrees
Speci kace laseru
Typ: Polovod iĈový laser InGaAIP (DVD), • AIGaAs (CD) Vlnová délka: 658 nm (DVD), 790 nm (CD)• Výstupní výkon: 7,0 mW (DVD), 10,0 mW • (VCD/CD) Divergence paprskţ: 60 stupŀţ
Minőségtanúsítás A garanciajegyen feltüntetett forgalombahozó vállalat a 2/1984. (lll. 10.) BkM-lpM együttes rendelet értelmében tanúsítja, hogy ezen készülék megfelel a mûszaki adatokban megadott értékeknek.
Figyelem! A meghibásodott készüleket - beleértve a hálózati csatlakozót is - csak szakember (szerviz) javíthatja. Ne tegye ki készüléket esőnek vagy nedvesség hatásának!
Garancia A forgalombahozó vállalat a termékre 12 hónap garanciát vállal.
Producent zastrzega moůliwoőĂ wprowadzania zmian technicznych.
Contents
1 Important 4
Safety and important notice 4 Trademark notice 4
2 Your product 5
Feature highlights 5 Product overview 5
3 Connect 6
Connect video cables 7 Connect audio cables 8 Route audio to other devices 8 Connect USB  ash drive 8 Connect power 8
4 Get started 8
Prepare the remote control 8 Find the correct viewing channel 9 Select menu display language 9 Turn on progressive scan 9
5 Play 9
Play a disc 9 Play video 10 Play music 11 Play photo 12 Play from USB  ash drive 13
English
6 Advanced features 13
Media copy 13 Create MP3  les 13
7 Adjust settings 14
General setup 14 Audio setup 14 Video setup 15 Preferences 16
8 Additional information 17
Update software 17 Care 18 Speci cations 18
9 Troubleshooting 19
10 Glossary 20
EN
3
1 Important
Safety and important notice
Warning
Risk of overheating! Never install the product in a con ned space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Never place the product, remote control or batteries
near naked  ames or other heat sources, including direct sunlight. Only use this product indoors. Keep this product away
from water, moisture and liquid- lled objects. Never place this product on other electrical equipment.
Keep away from this product during lightning storms. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Visible and invisible laser radiation when open. Avoid
exposure to beam.
This product complies with the radio interference requirements of the European Community. This product complies with the requirements of the following directives and guidelines: 2004/108/EC + 2006/95/EC.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.
Copyright notice
About Progressive Scan
Consumers should note that not all high de nition
television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 or 625 progressive scan picture problems, it is recommended that the user switch the connection to the ‘standard de nition’ output. If there are questions regarding our TV set compatibility with this model 525p and 625p DVD player, please contact our customer service center.
Disposal of your old product and batteries
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorised by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Trademark notice
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
4
EN
Region codes
Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
DivX, DivX Certi ed, and associated logos are trademarks of DivX, Inc. and are used under license. Play DivX tracks.
®
video with menus, subtitles and audio
The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, Inc.
CLASS 1
LASER PRODUCT
You can play discs with the following region codes.
DVD region code Countries
Europe
Product overview
Main unit
a
Turn on this product or switch to • standby.
b Disc compartment
English
2 Your product
Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips offers, register your product at www.philips.com/ welcome.
Feature highlights
Screen Fit View the movie in full screen display on any TV.
Progressive scan video Push the limits of standard resolution and provide a more  lm-like DVD video display on a TV screen.
Hi-speed USB link Plug a USB  ash drive to the USB jack to enjoy the MP3/WMA/JPEG/DivX  les.
Media copy Copy data  les (such as MP3, WMA and JPEG) from a disc to a USB drive.
c Display panel d
e
f
Open or close the disc compartment.
Start, pause or resume disc play.
jack
Connect a USB  ash drive.
Create MP3  les Convert audio tracks from an audio CD into MP3 format. The created MP3  les are saved in the USB  ash drive.
EN
5
Remote control
e BACK
Return to the previous display menu.
f
g
h Numeric buttons
i SUBTITLE
j
k REPEAT
l REPEAT A-B
m AUDIO/CREATE MP3
/
Skip to the previous or next title, chapter, • or track.
Switch to the USB mode.
Select an item to play.
Select a subtitle language on a disc.• Access the menu of copying/deleting USB • audio  les.
ZOOM
Fit the picture display to the TV screen.• Zoom the picture in or out.
Select various repeat play modes.
Repeat play for a speci c section.
Select an audio language or channel on • a disc. Access the menu of creating MP3  les.
a
Turn on the unit or switch to standby.
b
c DISC MENU
d
Open or close the disc compartment.
Access or exit the disc menu. • Switch to the disc mode.• For VCD and SVCD, turn on or off PBC • (playback control).
Navigate the menus.• Search fast-forward (
).
( Search slow-forward ( • backward (
) or fast-backward
) or slow-
).
n
o
p
q OK
r SETUP
Stop play.
Start, pause or resume disc play.
INFO
For discs, access the play options or • display the current disc status. For slideshows, display a thumbnail view • of photo  les.
Con rm an entry or selection.
Access or exit the setup menu.
3 Connect
Make the following connections to use this product. Basic connections:
Video• Audio
Optional connections:
Route audio to other devices:
Digital ampli er/receiver• Analog stereo system
USB  ash drive
6
EN
Note
Tip
Refer to the type plate at the back or bottom of the product for identi cation and supply ratings.
Before you make or change any connections, ensure that all the devices are disconnected from the power outlet.
Tip
Different types of connectors may be used to connect this product to your TV, depending on availability and your needs. A comprehensive interactive guide to help you connect your product is available at www. connectivityguide.philips.com.
Connect video cables
Connect this product to TV to view disc play. Select the best video connection that TV can support.
Option 1: Connect to component video jacks (for a standard TV or Progressive Scan TV).
Option 2: Connect to scart jack (for a standard TV).
Option 3: Connect to video (CVBS) jack (for a standard TV).
Note
You must connect this product directly to a TV.
The component video input jacks on the TV may be labeled as Y Pb/Cb Pr/Cr or YUV. This type of connection provides good picture quality.
Option 2: Connect to scart jack
1 Connect a scart cable (not supplied) to:
the TV OUT jack on this product. the scart input jack on the TV.
Tip
This type of connection provides good picture quality.
English
Option 1: Connect to component video jacks
Pb
Pr
Y
COMPONENT VIDEO OUT
Pr
Pb
COMPONENT
VIDEO IN
Y
1 Connect the component video cables (not
supplied) to:
the Y Pb Pr jacks on this product. the COMPONENT VIDEO input jacks • on the TV.
Option 3 : Connect to video (CVBS) jack
1 Connect a composite video cable (not
supplied) to:
the VIDEO OUT jack on this product. the video input jack on the TV.
Tip
The video input jack on the TV may be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND. This type of connection provides standard picture
quality.
EN
7
Connect audio cables
Connect the audio from this product to the TV to allow sound output through the TV.
1 Connect the audio cables (not supplied) to:
the AUDIO OUT L/R jacks on this product. the audio input jacks on the TV.
Route audio to other devices
Route the audio from this product to other devices to enhance audio play.
Connect to digital ampli er/receiver
DIGITAL IN
DIGITAL
OUT
the AUDIO OUT L/R jacks on this product. the audio input jacks on the device.
Tip
You can optimise the audio output (see ‘Adjust settings’ > [Audio Setup] > [Analogue Output] ) for details.
Connect USB  ash drive
1 Connect a USB  ash drive to the jack on
this product.
Note
This product can only play/view MP3, WMA, DivX or JPEG  les that are stored on a USB  ash drive. Press the
button to access the content and play
the  les.
Connect power
Caution
Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the product. Before connecting the AC power cord, ensure you have
completed all other connections.
COAXIAL
1 Connect a coaxial cable (not supplied) to:
the COAXIAL jack on this product. the COAXIAL/DIGITAL input jack on • the device.
Connect analogue stereo system
1 Connect the audio cables (not supplied) to:
Note
The type plate is located on the back of the product.
1 Connect the AC power cable to the wall
socket.
The product is ready to be set up for use. »
4 Get started
Prepare the remote control
8
EN
1 Open the battery compartment. 2 Insert 2 AAA batteries with correct polarity
(+/-) as indicated.
3 Close the battery compartment.
Caution
Remove batteries if they are exhausted or if the remote control is not to be used for a long time. Do not mix batteries (old and new or carbon and
alkaline, etc.). Batteries contain chemical substances, so they should be
disposed of properly.
Find the correct viewing channel
1 Press to turn on this product. 2 Turn on the TV and switch to the correct
video-in channel (refer to the TV user manual on how to select the correct channel).
English
1 Turn on the TV to the correct viewing channel
for this product.
2 Press SETUP . 3 Press to select [Video Setup] . 4 Select [Component Video] > [Interlaced] ,
then press OK .
5 Select [Progressive] > [On] , then press OK .
A warning message is displayed. »
Select menu display language
The language options may vary from • different regions.
1 Press SETUP .
» [General Setup] menu is displayed.
2 Select [OSD Language] , then press . 3 Press to select a language, then press OK .
Turn on progressive scan
6 To proceed, select [Ok] and press OK .
The progressive setup is complete. »
Note
If a blank/distorted screen is displayed, wait for 15 seconds for the auto recovery. If no picture is displayed, turn off the progressive scan
mode as follows:
to open the disc compartment.
1) Press
Numeric button ‘1’ .
2) Press the
7 Press SETUP to exit the menu. 8 You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
During play, when the progressive scan mode is on for both this product and the TV, distor ted picture may display. In this case, turn off the progressive scan feature on both this product and the TV.
Note
To use the progressive scan feature, you must connect a progressive scan TV with the component video jacks (see “Connect” > “Connect video cables” > “Option 1: Connect to the component video jacks” for details).
5 Play
Play a disc
Caution
Do not place any objects other than discs into the disc compartment. Do not touch the disc optical lens inside the disc
compartment.
EN
9
1 Press to open the disc compartment. 2 Insert a disc with its label facing up. 3 Press to close the disc compartment and
start disc play.
To view disc play, turn on the TV to the • correct viewing channel for this product. To stop disc play, press
Note
Check the types of discs supported (see “Speci cations” > “Play media”). If the password entry menu is displayed, enter the
password before you can play the locked or restricted disc (see “Adjust settings” > “Preferences” > [Parental Control] ). If you pause or stop a disc, the screen saver appears after
5 minutes of inactivity. To deactivate the screen saver, press DISC MENU . After you pause or stop a disc and no button is pressed
within 15 minutes, this product automatically switches to standby.
.
Play video
Button Action
REPEAT Select or turn off repeat mode.
Repeat options may vary from disc type.
ZOOM
ZOOM
INFO
Fit the picture format to the TV screen. Press repeatedly until the image is scaled to  t to the TV screen.
Toggle between screen aspect ratio and different zoom factor. To pan through the zoomed image, press the Navigation buttons .
Access the play options and display the current disc status.
Access DVD menu 1 Press DISC MENU to access the disc root
menu.
2 Select a play option, then press OK .
In some menus, press the Numeric
buttons to input your selection.
Note
Some operations may not work with some discs. See the information accompanying the disc for details.
Control video play 1 Play a title.
2 Use the remote control to control the play.
Button Action
,
,
,
AUDIO/
CREATE MP3
SUBTITLE Select a subtitle language availabel
Start, pause or resume disc play. Stop disc play. Skip to a previous/next title or
chapter. Search fast-backward or fast-
forward. Press repeatedly to change the search speed.
Search slow-forward or slow­backward. Press repeatedly to change the search speed. For VCD/SVCD, slow-backward search is not available.
Select an audio language or channel available on a disc.
on a disc.
Access VCD menu
The PBC (playback control) feature is available for VCD/SVCD, which can display the contents menu for you to select a play option. The PBC is on by default in the factory.
Note
See “Adjust settings” > [Preferences] > [PBC] on how to turn PBC on or off.
1 Display the contents menu via one of the
following ways:
If PBC is on, load in a VCD/SVCD.• During play with PBC on, press
BACK .
2 Press the Numeric buttons to select a play
option, then press OK to start play.
If PBC is turned off, it skips the menu • display and starts play from the  rst track.
Preview disc contents 1 During play, press INFO .
The disc status menu is displayed. »
2 Select [Preview] , then press . 3 Select a preview option, then press OK .
A thumbnails preview screen is displayed. »
10
EN
To go to the next/previous prview • screen, select [Prev] or [Next] , then press OK . To start play, press OK at the selected thumbnail picture.
Skip play to a speci c time 1 During play, press INFO .
The disc status menu is displayed. »
2 Select an option for the current elapsed
playing time, then press
[TT Time] (title time)
[CH Time] (chapter time)
[Disc Time] (disc time)
[Track Time] (track time)
.
3 Press the Numeric buttons to enter the time
to skip to, then press OK .
Play DivX® video
DivX video is a digital media format that retains high quality despite a high rate of compression. You can enjoy DivX video on this DivX certi ed product.
1 Insert a disc or USB that contains the DivX
videos.
For USB, press • A contents menu is displayed.
.
2 Select a title to play, then press OK .
You may select subtitle/audio language.
Note
You can only play DivX video that is rented or purchased with the DivX registration code of this product (see “Adjust Settings” > [General Setup] > [DivX
Code] ).
®
VOD
English
Display play time 1 During play, press INFO .
The disc status menu is displayed. »
2 Select [Time Disp.] , then press .
The display options vary from disc type. »
3 Select an option, then press OK . View DVD play from different angles
1 During play, press INFO .
The disc status menu is displayed. »
2 Select [Angle] , then press . 3 Press the Numeric buttons to change the
angle.
Play changes to the selected angle. »
Note
Applicable only to discs contain multi-angle scenes.
Repeat play a speci c section 1 During play, press REPEAT A-B at the start
point.
2 Press REPEAT A-B again to set the end point.
Repeat play starts. »
Play music
Control a track 1 Play a track.
2 Use the remote control to control the play.
Button Action
,
Start, pause or resume disc play.
Stop disc play. Skip to a previous/next
track. Select an item to play.
,
REPEAT Select or turn off repeat
Searches fast-backward or fast-forward. Press repeatedly to change the search speed.
mode. Repeat options may vary from disc type.
3 To cancel repeat play, press REPEAT A-B
again.
Note
The marked section for repeat play is only possible within a track/title.
Quick skip play 1 During play, press INFO repeatedly to
select an option.
EN
11
Display Action
[Disc Go To] Skip play to a speci c
time within the disc.
[Track Go To] Skip play to a speci c
time within a track.
[Select Track] Skip play to a speci c
track number.
2 Press the numeric buttons to change the time/
number to skip to.
Play MP3/WMA music
MP3/WMA is a type of highly compressed audio  le ( les with .mp3, .wma extensions).
1 Insert a disc or USB that contains the MP3/
WMA music.
For USB, press
.
A contents menu is displayed.
2 If play does not automatically start, select a
track to play.
To select another track/folder, press • then press OK .
,
To enlarge the selected photo and start • slideshow, press OK . To return to the menu, press
BACK .
Note
It may require longer time to display the disc content on the TV due to the large number of songs/photos compiled onto one disc/USB  ash drive. If the JPEG photo is not recorded with an ‘exif ’ type
 le, the actual thumbnail picture cannot be shown on the screen. It is replaced by a ‘blue mountain’ thumbnail picture. This product can only display digital camera pictures
according to the JPEG-EXIF format, typically used by almost all digital cameras. It cannot display Motion JPEG, or pictures in formats other than JPEG, or sound clips associated with pictures. Folders/ les that exceed the supported limit of this
product cannot be displayed or played.
Control photo play 1 Play a photo slideshow.
2 Use the remote control to control the play.
Button Action
Note
For disc recorded in multiple sessions, only the  rst session is played. For a WMA  le that is protected by Digital Rights
Management (DRM), it cannot be played on this product. This product does not suppor t MP3PRO audio format.
For any special character that is present in the MP3 track name (ID3) or album name, it might not be displayed correctly on the screen because these characters are not supported. Folders/ les that exceed the supported limit of this
product cannot be displayed or played.
Play photo
Play photo as slideshow
You can play JPEG photos ( les with .jpeg or .jpg extensions).
1 Insert a disc or USB that contains the JPEG
photos.
For USB, press • Slideshow begins (for Kodak disc), or • a contents menu (for JPEG disc) is displayed.
2 Select a photo folder, then press OK to start
slideshow. To preview the photos in thumbnail, press INFO .
To select a photo, press the Navigation buttons .
.
/
Rotate a photo anti-clockwise/ clockwise.
/
Rotate a photo horizontally/ vertically.
ZOOM
Zoom in or out of a photo. Play pauses in zoom mode.
Stop a play.
Play musical slideshow
Create a musical slideshow to play MP3/WMA music  les and JPEG photo  les simultaneously.
Note
To create a musical slideshow, you must store the MP3/ WMA and JPEG  les on the same disc/USB  ash drive.
1 Play MP3/WMA music. 2 Press BACK to return to the main menu. 3 Navigate to the photo folder/album and press
OK to start slideshow play.
Slideshow begins and continues till the end » of the photo folder or album.
Audio continues to play until the end of » the disc.
To stop slideshow play, press • To stop music play, press
.
again.
12
EN
Play from USB  ash drive
This product plays/views MP3, WMA, DivX or JPEG  les that are stored on a USB  ash drive.
1 Connect a USB  ash drive to the jack on
this product.
2 Press the button.
A contents menu is displayed. »
3 If play does not start automatically, select a  le
to play.
For more information, see the chapters • “Play music”, “Play photo” and “Play video” for details.
4 To stop play, press .
To switch to the disc mode, press the
button.
6 Advanced features
Media copy
Note
When you copy, never press any button. Copy-protected media cannot be copied.
English
Create MP3  les
With this product, you can convert audio CDs into MP3 audio  les. The created MP3 audio  les are saved in the USB  ash drive.
1 Inser t an audio CD. 2 Connect a USB  ash drive to the jack on
this product.
3 During disc play, press AUDIO/CREATE MP3 .
The MP3 creation menu is displayed. »
4 Select [Yes] in the menu, then press OK .
You can copy  les (such as MP3, WMA or JPEG) from disc to a USB  ash drive.
1 Inser t a disc that contains the MP3/WMA/
JPEG  les.
2 In the stop mode, connect the USB  ash drive
to the
3 Select a  le to copy, then press SUBTITLE . 4 Select [Yes] in the menu, then press OK .
jack on this product.
00:00/00:00 005/030
\MP3
Previous
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Do you want to copy this file
Yes No
Once complete, a new folder is created » automatically in the USB  ash drive to store all the new  les.
5 To stop copy progress, press , then press
OK .
5 Select a conversion option in the [OPTIONS]
panel, then press OK repeatedly to select an item.
Option Description
[Speed] Select a copying speed. [Bitrate] Select a quality level.
Higher bitrate for better sound quality and bigger  le size.
[CRT ID3] Copy track information into the
MP3  le.
[Device] The createed  les can only be saved
in a USB  ash drive.
6 Press to access the [Track] panel. 7 Select an audio track, then press OK .
To select another track, repeat step 7.• To select all tracks, select [Select All] in the menu, and press OK . To deselect all tracks, select [Deselect all] • in the menu, and press OK .
EN
13
8 Select [Start] in the menu, then press OK to
start to convert.
Once complete, a new folder is created » automatically in the USB  ash drive to store all the new MP3  les.
To exit the menu, select [Exit] , then press OK .
Tip
You can set or change the password, go to [Preferences] > [Password] .
[OSD Language] Select an on-screen menu language.
Note
When you convert, never press any button. DTS CDs and copy-protected CDs cannot be converted. Writer-protected or password-protected USB  ash drives cannot be used to store MP3  les.
7 Adjust settings
Note
If the setup option is grayed out, it means the setting cannot be changed at the current state.
General setup
[Sleep Timer] Switch automatically to standby at the preset time.
[Off] - Disable sleep mode.
[15 mins] , [30 mins] , [45 mins] , [60 mins] - Select the count down time for this product to switch to standby.
[Auto Standby] Turn on or off automatically standby.
[On] - Switch to standby 15 minutes of inactivity (for example, in pause or stop mode).
[Off] - Disable the auto standby mode.
[DivX(R) VOD Code] Display the DivX
Tip
Use this product’s DivX registration code when you rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX (Video On Demand) service can be played only on the device to which it is registered.
®
registration code.
®
VOD
1 Press SETUP .
» [General Setup] menu is displayed.
2 Press . 3 Select an option, then press OK . 4 Select a setting, then press OK .
To return to the previous menu, press • To exit the menu, press SETUP .
[Disc Lock] Set play restriction for a disc which is loaded in the disc compar tment (maximum 20 discs can be locked).
[Lock] - Restrict access to the current disc. The next time you want to play this disc or unlock it, you need to enter the password.
[Unlock] - Play all discs.
Audio setup
.
1 Press SETUP .
» [General Setup] menu is displayed.
2 Press to select [Audio Setup] , then press . 3 Select an option, then press OK . 4 Select a setting, then press OK .
To return to the previous menu, press • To exit the menu, press SETUP .
.
14
EN
[Analogue Output] Select an analogue setting based on the audio device that is connected through the analogue audio jack.
[Stereo] - For stereo output.
[LT/RT] - For surround sound output through two speakers.
[Digital Audio] Select a digital setting based on the digital ampli er/ receiver that is connected through the digital jack (coaxial/digital).
[Digital Output] - Select a type of digital output.
[Off] - Disable digital output.
[All] - Support multi-channel audio formats.
[PCM Only] - Downmix to two-channel audio format.
[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.
[48kHz] - For discs recorded at sampling rate of 48 kHz.
[96kHz] - For discs recorded at sampling rate of 96 kHz.
[88.2kHz (X2)] - Convert to twice the original sampling rate.
[176.4kHz(X4)] - Convert to four times the original sampling rate.
English
[Night Mode] Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
[On] – Enjoy quiet viewing at night.
[Off] – Enjoy surround sound with a full dynamic range.
Note
Applicable only to Dolby Digital encoded DVD.
Video setup
Note
• [LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only] .
The higher the sampling rate, the better the sound
quality.
[Volume] Set the default volume level when you play a disc.
1. Press OK .
2. Press
3. Press OK to con rm and exit.
[Sound Mode] Select a preset sound effect to enhance the audio output.
[3D] - Select a virtual surround sound effect that is produced from the left and right audio channels.
[Movie Mode] - Select a sound effect for movies.
[Music Mode] - Select a sound effect for music.
to set the volume.
1 Press SETUP .
» [General Setup] menu is displayed.
2 Press to select [Video Setup] , then press . 3 Select an option, then press OK . 4 Select a setting, then press OK .
To return to the previous menu, press • To exit the menu, press SETUP .
[TV System] Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country.
[PAL] - For PAL-system TV.
[Multi] - For TV that is compatible with both PAL and NTSC.
[NTSC] - For NTSC-system TV.
[TV Display] Select a display format:
.
[CD Upsampling] For better sound quality in stereo mode, convert the music CD to a higher sampling rate.
[Off] - Turn off CD-upsampling.
EN
15
[4:3 Pan Scan] - For 4:3 screen TV: full-height display with the trimmed sides.
[4:3 Letter Box] - For 4:3 screen TV: wide­screen display with black bars on the top and bottom of the screen.
[16:9] - For wide-screen TV: display ratio 16:9.
[Progressive] If a progressive scan TV is connected to this product, turn on the progressive scan mode.
[On] - Turn on progressive scan.
[Off] - Turn off progressive scan mode.
Note
1 Press SETUP .
» [General Setup] menu is displayed.
2 Press to select [Preferences] , then press . 3 Select an option, then press OK . 4 Select a setting, then press OK .
To return to the previous menu, press • To exit the menu, press SETUP .
.
For more detailed description, see “Get started” > “Turn on progressive scan”.
[Picture Setting] Select a prede ned set of picture color settings or customize the personal setting.
[Standard] - Original color setting.
[Bright] - Vibrant color setting.
[Soft] - Warm color setting.
[Personal] - Customize the color setting. Set the level of brightness, contrast, tint and color saturation, then press OK .
[Component Video] Select the video output that matches the video connection between this product and the TV.
[Interlaced] - Component video ( Y Pb Pr ) connection.
[RGB] - Scart ( TV OUT ) connection.
Preferences
[Audio] Select an audio language for disc play.
[Subtitle] Select a subtitle language for disc play.
[Disc Menu] Select a disc menu language.
Note
If the language you have set is not available on the disc, the disc uses its own default language. For some DVDs, the subtitle/audio language can only
change from the disc menu. To select the languages that are not listed in the menu,
select [Others] . Then check the Language Code list at the back of this user manual and enter the respective language code.
[Parental Control] Restrict access to discs that are unsuitable for children. These types of discs must be recorded with ratings.
Note
Stop disc play before you can access to [Preferences] .
16
EN
1. Press OK .
2. Select a rating level, then press OK .
3. Press the numeric buttons to enter the password.
Note
Rated DVDs above the level you set in [Parental Control] require a password to be played. The ratings are country-dependent. To allow all discs to
play, select ‘ 8 ’. Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on such discs.
[PBC] Turn on or off the content menu of VCDs/SVCDs with PBC (playback control) feature.
[On] - Display the index menu when you load a disc for play.
[Off] - Skip the menu and start play from the  rst title.
[MP3/JPEG Nav] Select to display the folders or display all the  les.
[View Files] - Display all the  les.
[View Folders] - Display the folders of MP3/ WMA  les.
[Password] Set or change the password for locked discs and play restricted DVDs.
[DivX Subtitle] Select a character set that supports the DivX subtitle.
[Standard] – English, Irish, Danish, Estonian, Finnish, French, German, Italian, Portuguese, Luxembourgish, Norwegian (Bokmål and Nynorsk), Spanish, Swedish, Turkish
[Central Europe] – Polish, Czech, Slovak, Albanian, Hungarian, Slovene, Croatian, Serbian (Latin script), Romanian
[Cyrillic] – Belarusian, Bulgarian, Ukrainian, Macedonian, Russian, Serbian
[Greek] – Greek
Note
Ensure that the subtitle  le has the exact same  le name as the movie  le. If for example the  le name of the movie is ‘Movie.avi’, then you need to name the text  le ‘Movie.sub’ or ‘Movie.srt’.
[Version Info] Display the software version of this product.
Tip
This information is required when you want to  nd out if a newest software version is available at the Philips website that you may download and install on this product.
English
1. Press the Numeric buttons to enter ‘136900’ or the last set password at [Old Password]  eld.
2. Enter the new password at [New Password]  eld.
3. Enter the new password again at [Con rm PWD]  eld.
4. Press OK to exit the menu.
Note
If you forget the password, enter ‘136900’ before you set a new password.
[Default] Reset all the settings of this product to factory
default, except for [Disc Lock] , [Parental Control] and [Password] settings.
8 Additional information
Update software
For software updates, check the current software version of this product to compare with the latest software (if available) at the Philips website.
Caution
Power supply must not be interrupted during software upgrade.
1 Press SETUP . 2 Select [Preferences] > [Version Info] , then
press OK .
3 Write down the  le name, then press SETUP
to exit the menu.
EN
17
4 Visit www.philips.com/support to check for
the latest software version, using the  le name for this product.
5 Refer to the upgrade instructions on the
website for more information.
Note
Disconnect the power cord for a few seconds and connect again to turn on the product.
Care
Caution
Never use solvents such as benzene, thinner, cleaners available commercially, or anti-static sprays intended for discs.
Clean discs Wipe the disc with a micro  bre cleaning cloth from the centre to the edge in a straight line movement.
Speci cations
Note
Speci cation and design are subject to change without notice
Accessories supplied
Remote control and batteries• User Manual• Quick Start Guide
Play media
DVD-Video, Video CD/SVCD, Audio CD, • CD-R/CD-RW, DVD+R/+RW, DVD-R/-RW, DivX-CD, Picture CD, MP3-CD, WMA-CD, USB  ash drive
USB
Compatibility: Hi-Speed USB (2.0)• Class support: UMS (USB Mass Storage Class)
Video format
Digital compression:
MPEG 2: DVD/SVCD• MPEG 1: VCD/DivX
Horizontal resolution:
DVD: 720 pixels (50 Hz); 720 pixels (60 • Hz) VCD: 352 pixels (50 Hz); 352 pixels (60 • Hz)
Ver tical resolution:
DVD: 576 pixels (50 Hz); 480 pixels (60 • Hz) VCD: 288 lines (50 Hz); 240 lines (60 Hz)
Audio performance
DA converter: 24 bits, 192 kHz• Frequency response:
DVD: 4 Hz - 22 kHz (48 kHz); 4 Hz - 44 • kHz (96 kHz) SVCD: 4 Hz - 20 kHz (44.1 kHz); 4 Hz - • 22 kHz (48 kHz)
CD/VCD: 4 Hz - 20 kHz (44.1 kHz) • Signal-Noise (1 kHz): > 90 dB (A-weighted)• Dynamic range (1 kHz): > 80 dB (A-weighted)• Crosstalk (1 kHz): > 70 dB• Distor tion/noise (1 kHz): > 65 dB• MPEG MP3: MPEG Audio L3
Audio format
Digital:
MPEG/AC-3/PCM: Compressed digital
(16, 20, 24 bits fs, 44.1, 48, 96 kHz)
MP3 (ISO 9660): 96, 112, 128, 256 kbps
& variable bit rate fs, 32, 44.1, 48 kHz Analog sound stereo• Dolby surround compatible downmix from • Dolby Digital multi-channel sound
Connections
Scart output: Euroconnector• Y Pb Pr output: Cinch 3x• Video output: Cinch (yellow)• Audio output (L+R): Cinch (white/red)• Digital output:
1 coaxial: IEC60958 for CDDA/LPCM;
IEC61937 for MPEG 1/2, Dolby Digital
TV standard
Number of lines:
625 (PAL/50Hz); 525 (NTSC/60Hz)• Play: Multi-standard (PAL/NTSC)
Video performance
Video DAC: 12 bits, 108 MHz• Y Pb Pr: 0.7 Vpp ~ 75 ohm• Video output: 1 Vpp ~ 75 ohm
18
EN
Main unit
Dimensions (w x h x d): 360 x 37 x 209 (mm)• Net Weight: approximately 1.3 kg
Power
Power supply rating: 230V, 50HZ• Power consumption: <10 W• Power consumption in standby mode: <1 W
Laser speci cation
Type: Semiconductor laser InGaAIP (DVD), • AIGaAs (CD) Wave length: 658 nm (DVD), 790 nm (CD)• Output Power: 7.0 mW (DVD), 10.0 mW • (VCD/CD) Beam divergence: 60 degrees
9 Troubleshooting
Warning
Risk of electric shock. Never remove the casing of the product.
To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back of your product. Write the numbers here: Model No. __________________________ Serial No. ___________________________
Main unit
The buttons on this unit do not work.
Disconnect this product from the power • outlet for a few minutes, then connect again.
No reaction to the remote control.
Connect this product to the power outlet.• Point the remote control at the IR sensor • located on the front panel of this product. Insert the batteries correctly.• Insert new batteries in the remote control.
Picture
Sound
No audio output from the TV.
Ensure that the audio cables are connected to • the audio input of the TV. Assign the audio input of the TV to the • corresponding video input. See the TV user manual for details.
No audio output from the loudspeakers of the audio device (stereo system/ampli er/receiver).
Ensure that the audio cables are connected to • the audio input of the audio device. Turn on the audio device to its correct audio • input source.
No sound during DivX video playback
The audio codec may not be supported by this • product.
Play
DivX video  les cannot be played.
Ensure that the DivX video  le is complete. Ensure that the  le name extension is correct.
The aspect ratio of the screen is not aligned with the TV display setting.
The aspect ratio is  xed on the disc.
DivX subtitles are not displayed correctly.
Ensure that the subtitle  le name is the same as the movie  le name. Select the correct character set.
Press SETUP .
Select [Preferences] > [DivX Subtitle] in
the menu.
Select the character set that supports the
subtitle.
The contents of the USB  ash drive cannot be read.
The USB  ash drive format is not compatible with the digital receiver. The drive is formatted with a  le system which is not supported by this unit (e.g. NTFS).
English
No picture.
See the TVs user manual on how to select the correct input on the TV. Change the TV channel until you see the Philips screen. If you have turned on the progressive scan setting or change the TV system setting, switch back to default mode: 1) Press open the disc compartment. 2) Press the Numeric button ‘1’ (for progressive scan) or the Numeric button ’3’ (for TV system).
to
EN
19
10 Glossary
A
Aspect ratio
Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-de nition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen.
D
W
WMA
Windows Media™ Audio. Refers to an audio compression technology developed by Microsoft Corporation. WMA data can be encoded with Windows Media player version 9 or Windows Media player for Windows XP. Files are recognized by their  le extension ‘.wma.’
DivX Video-On-Demand
This DivX Certi ed in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX video.
®
device must be registered
J
JPEG
A very common digital still picture format. A still­picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio. Files are recognized by their  le extension ‘.jpg’ or ‘.jpeg.’
M
MP3
A  le format with a sound data compression system. MP3 is the abbreviation of Motion Picture Exper ts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD.
P
PBC
Playback Control. A system where you navigate through a Video CD/Super VCD with on-screen menus that are recorded onto the disc. You can enjoy interactive playback and search.
Progressive scan
The progressive scan displays twice the number of frames per second than in an ordinary TV system. It offers higher picture resolution and quality.
20
EN
Language Code
Abkhazian 6566 Afar 6565 Afrikaans 6570 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerhaijani 6590 Bahasa Melayu 7783 Bashkir 6665 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokmål, Norwegian 7866 Bosanski 6683 Brezhoneg 6682 Bulgarian 6671 Burmese 7789 Castellano, Español 6983 Catalán 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 9072
中文
Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Chuvash 6786 Corsican 6779 Česky 6783 Dansk 6865 Deutsch 6869 Dzongkha 6890 English 6978 Esperanto 6979 Estonian 6984 Euskara 6985  6976 Faroese 7079 Français 7082 Frysk 7089 Fijian 7074 Gaelic; Scottish Gaelic 7168 Gallegan 7176 Georgian 7565 Gikuyu; Kikuyu 7573 Guarani 7178 Gujarati 7185 Hausa 7265 Herero 7290 Hindi 7273 Hiri Motu 7279 Hrwatski 6779 Ido 7379 Interlingua (International)7365 Interlingue 7365 Inuktitut 7385
Inupiaq 7375 Irish 7165 Íslenska 7383 Italiano 7384 Ivrit 7269 Japanese 7465 Javanese 7486 Kalaallisut 7576 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kernewek 7587 Khmer 7577 Kinyarwanda 8287 Kirghiz 7589 Komi 7586 Korean 7579 Kuanyama; Kwanyama 7574 Kurdish 7585 Lao 7679 Latina 7665 Latvian 7686 Letzeburgesch; 7666 Limburgan; Limburger 7673 Lingala 7678 Lithuanian 7684 Luxembourgish; 7666 Macedonian 7775 Malagasy 7771 Magyar 7285 Malayalam 7776 Maltese 7784 Manx 7186 Maori 7773 Marathi 7782 Marshallese 7772 Moldavian 7779 Mongolian 7778 Nauru 7865 Navaho; Navajo 7886 Ndebele, North 7868 Ndebele, South 7882 Ndonga 7871 Nederlands 7876 Nepali 7869 Norsk 7879 Northern Sami 8369 North Ndebele 7868 Norwegian Nynorsk; 7878 Occitan; Provencal 7967 Old Bulgarian; Old Slavonic 6785 Oriya 7982 Oromo 7977 Ossetian; Ossetic 7983 Pali 8073 Panjabi 8065 Persian 7065 Polski 8076 Português 8084
Pushto 8083 Russian 8285 Quechua 8185 Raeto-Romance 8277 Romanian 8279 Rundi 8278 Samoan 8377 Sango 8371 Sanskrit 8365 Sardinian 8367 Serbian 8382 Shona 8378 Shqip 8381 Sindhi 8368 Sinhalese 8373 Slovensky 8373 Slovenian 8376 Somali 8379 Sotho; Southern 8384 South Ndebele 7882 Sundanese 8385 Suomi 7073 Swahili 8387 Swati 8383 Svenska 8386 Tagalog 8476 Tahitian 8489 Tajik 8471 Tamil 8465 Tatar 8484 Telugu 8469 Thai 8472 Tibetan 6679 Tigrinya 8473 Tonga (Tonga Islands) 8479 Tsonga 8483 Tswana 8478 Türkçe 8482 Turkmen 8475 Twi 8487 Uighur 8571 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapuk 8679 Walloon 8765 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 8973 Yoruba 8979 Zulu 9085
160
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. Document order number:
DVP3350/3354_58_UM_V2.0
Loading...