Philips DVP3345V/F7E, DVP3345V/F7B, DVP3345V User Manual

DIGITAL VIDEO DISC PLAYER &
VIDEO CASSETTE RECORDER

DVP3345V

User Manual

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 1

English

Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so
don't miss out. Complete and return your Product Registration Card at once, or register online at
www.philips.com/welcome to ensure:

Return your Product Registration Card or register online at

www.philips.com/welcome today to get the very most from your purchase.

Know these

safety symbols

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

*Proof of
Purchase

Returning the enclosed card
guarantees that your date of pur­chase will be on file, so no addi­tional paperwork will be required
from you to obtain warranty ser­vice.

*Product Safety
Notification

By registering your product, you'll
receive notification - directly
from the manufacturer - in the
rare case of a product recall or
safety defect.

*Additional
Benefits

Registering your product guaran­tees that you'll receive all of the
privileges to which you're enti­tled, including special money-sav­ing offers.

Visit our World Wide Web Site at http://www.philips.com/welcome

For Customer Use

Enter below the Model and Serial numbers which are
located on the rear of the cabinet. Retain this information
for future reference.

Model No. ______________________________________
Serial No. ______________________________________

This “bolt of lightning” indicates uninsulated material
within your unit may cause an electrical shock.For
the safety of everyone in your household,please do
not remove product covering.

The “exclamation point” calls attention to features
for which you should read the enclosed literature
closely to prevent operating and maintenance
problems.

WARNING: To reduce the risk of fire or electric

shock, this apparatus should not be exposed to rain or
moisture, and objects filled with liquids, such as vases,
should not be placed on this apparatus.

CAUTION: To prevent electric shock,match wide blade of
plug to wide slot, fully insert.

ATTENTION:Pour éviter les choc électriques, introduire la
lame la plus large de la fiche dans la borne correspondante de
la prise et pousser jusqu’au fond.

Congratulations on your purchase,
and welcome to the “family!”

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS.
You’ve selected one of the best-built, best­backed products available today.We’ll do
everything in our power to keep you happy
with your purchase for many years to come.

As a member of the PHILIPS “family,” you’re
entitled to protection by one of the most
comprehensive warranties and outstanding
service networks in the industry.What’s
more, your purchase guarantees you’ll
receive all the information and special offers
for which you qualify, plus easy access to
accessories from our convenient home
shopping network.

Most importantly,you can count on our
uncompromising commitment to your total
satisfaction.

All of this is our way of saying welcome ­and thanks for investing in a PHILIPS
product.

P.S. To get the most from your
PHILIPS purchase, be sure to
complete and return your Product
Registration Card at once, or
register online at:

www.philips.com/welcome

E8E21UD_EN1.qxd 09.2.2 5:27 PM Page 2

English

Safety Information 3

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

Example of Antenna Grounding
as per NEC - National Electric Code

Note to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC

that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with

the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or groundingtype

plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has
two blades and third grounding prong. The wide
blade or third prong are provided for your safety.
When the provided plug does not fit into your out­let, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the
apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus combina­tion to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-sup­ply cord or plug is damaged, liquid has been spilled or objects have fall­en into apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

15. This product may contain lead and mercury. Disposal of these materials

may be regulated due to environmental considerations. For disposal or
recycling information, please contact your local authorities or the
Electronic Industries Alliance: www.eiae.org

16. Damage Requiring Service - The appliance should be serviced by

qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a

marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Tilt/Stability - All televisions must comply with recommended interna-

tional global safety standards for tilt and stability properties of its cabi­net design.

●

Do not compromise these design standards by applying excessive pull
force to the front, or top, of the cabinet which could ultimately overturn
the product.

●

Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could unsuspect­ingly fall from the top of the set and cause product damage and/or per­sonal injury.

18. Wall or Ceiling Mounting - The appliance should be mounted to a

wall or ceiling only as recommended by the manufacturer.

19. Power Lines - An outdoor antenna should be located away from power

lines.

20. OutdoorAntenna Grounding - If an outside antenna is connected to

the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70- 1984,
provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna dis­charge unit, size of grounding connectors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements for the
grounding electrode. See Figure below.

21. Object and Liquid Entry - Care should be taken so that objects do not

fall and liquids are not spilled into the enclosure through openings.
a) Warning: To reduce the risk of fire or electric shock, this apparatus
should not be exposed to rain or moisture and objects filled with liq­uids, such as vases, should not be placed on this apparatus.

22. Battery Usage CAUTION - To prevent battery leakage that may result

in bodily injury, property damage, or damage to the unit:

●

Install all batteries correctly, with + and - aligned as marked on the
unit.

●

Do not mix batteries (old and new or carbon and alkaline, etc.).

●

Remove batteries when the unit is not used for a long time.

23. Overloading - Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of fire or electric
shock.

24. Object and Liquid Entry - Never push objects of any kind into this

product through openings as they may touch dangerous voltage points
or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.

25. Replacement Parts - When replacement parts are required, be sure the

service technician has used replacement parts specified by the manufac­turer or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.

26. Safety Check - Upon completion of any service or repairs to this prod-

uct, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.

AC Polarized

Plug

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 3

English

4 Safety Information (cont’d)

Safety Precautions

Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
Federal Communications Commission (FCC) Warning: Any unauthorized changes or

modifications to this device void the user’s authority to operate it.

• Do not stand the unit up vertically. Install the unit in a horizontal and stable position.

• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Department of Health and Human Services (DHHS) Certification: Complies with 21 Center
for Radiation (CFR) chapter 1 subchapter J applicable at time of manufacture.

Laser Safety: This unit employs a laser. Only a qualified service person should remove the cover

or attempt to service this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK
DEFEATED. DO NOT STARE INTO BEAM. THE BEAM IS LOCATED INSIDE, NEAR THE DECK
MECHANISM.

Special Information for Canadian Users: This Class B digital apparatus complies with

Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Radio/TV Interference: This device has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a residential installation.This device generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this device
does cause harmful interference to radio or television reception,which can be determined by turning the
device off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the device and the receiver.

3) Connect the device into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

Copyright Notice: T

he making of unauthorized copies of copy-protected material,including
computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and
constitute a criminal offence. This equipment should not be used for such purposes.

Copyright Protection: Unauthorized copying, broadcasting, public performance, and lending of

Discs are prohibited.

This product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Notice for Progressive Scan Use: Consumers should note that not all high definition

television sets are fully compatible with this product and may cause artifacts to be displayed in the
picture. In case of picture problems with 525 (480) progressive scan output, it is recommended that the
user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV
set compatibility with this 525p (480p) DVD player,please contact our customer service center.

Declaration of Conformity

Model Number: DVP3345V
Trade Name: Philips
Responsible Party: P&F USA, Inc.

P. O. Box 672768 Marietta, Georgia 30006
1-866-771-4018

Manufactured under license from Dolby Laboratories."Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
Copyright 2009 Philips. All rights reserved.

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 4

Table of Contents 5

General Information

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . .3-4

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Playable Discs and Video Cassettes . . . . . . . . . . . . . .7

Initial DVD/VCR Setup

Hookups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-12

Remote Control Setup . . . . . . . . . . . . . . . . . . . . . .13

First-time DVD/VCR Setup . . . . . . . . . . . . . . . . . . .14

Basic Playback

Video Cassette Playback . . . . . . . . . . . . . . . . . . . . .15

Disc Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Basic DVD/VCR Controls

Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Front Panel, Rear Panel and Remote Control . . . . .18

Additional VCR Setup

Clock (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Language (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

VCR Status Displays . . . . . . . . . . . . . . . . . . . . . . . .20

VCR Recording Options

Videotape Recording . . . . . . . . . . . . . . . . . . . . . . . .21

One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . .22

Rerecording (Tape Duplication) . . . . . . . . . . . . . . . .23

Timer Recording . . . . . . . . . . . . . . . . . . . . . . . .24-25

Satellite Link . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27

DVD to Videotape Duplication . . . . . . . . . . . . . . . .28

Video Cassette Playing Options

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Ta pe Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Time Search, Index Search . . . . . . . . . . . . . . . . . . . .30

Special Effects Playback . . . . . . . . . . . . . . . . . . . . . .31

Automatic Operation Features . . . . . . . . . . . . . . . .31

Additional VCR Features

Hi-Fi Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Disc Playback Features

Menus, Playback Control (PBC) Function . . . . . . . .32

Fast Forward/Fast Reverse . . . . . . . . . . . . . . . . . . .33

x1.3 and x0.8 Rapid Play with Voice . . . . . . . . . . . . .33

Title/Chapter/Time Search . . . . . . . . . . . . . . . . . . .34

Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Paused and Step-by-Step Playback, Resume On . . .36

Repeat, A-B Repeat . . . . . . . . . . . . . . . . . . . . . . . . .37

Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Subtitles, Camera Angles . . . . . . . . . . . . . . . . . . . . .39

Audio Language, Stereo Sound Mode . . . . . . . . . . .40

Slow Motion, Zoom . . . . . . . . . . . . . . . . . . . . . . . .41

Program /Random Playback . . . . . . . . . . . . . . . . . . .42

MP3/Windows MediaTMAudio/JPEG Playback . . .43-44

On-Screen Displays . . . . . . . . . . . . . . . . . . . . . .45-46

Black Level,Virtual Surround . . . . . . . . . . . . . . . . . .47

Initializing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

DVD Player Setup Options

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48-49

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-51

Progressive Scan . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Parental Password . . . . . . . . . . . . . . . . . . . . . . . . . .53

Parental Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56

Information You May Need

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . .58-60

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . .61

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Information Index . . . . . . . . . . . . . . . . . . . . . . . . . .63

English

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 5

English

6 Introduction

VCR Features

• Automatic Head Cleaner

• English, French and Spanish Menus and

Displays

• 19 Micron head

• Recording: One-Touch and Timer

• Repeat Playback

• Satellite Link

• Searching:Time, Index, Forward and
Reverse

• Slow Motion

• Still Picture

•Tape Counter

•Tracking Adjustment

Welcome!

This DVD/VCR combines a Digital Video Disc (DVD) player and a Hi-Fi Video Cassette
Recorder (VCR) into one unit, letting you play DVDs, Audio Compact Discs (Audio
CDs), and Video Cassettes on one piece of equipment.
Read this owner’s manual carefully to learn how to use the features listed below.

Package Contents

The following items are provided with your new DVD/VCR.

• Remote Control and two AA batteries

• One set of Audio (red and white tips) and Video (yellow tips) cables

• This Owner’s Manual and Quick Start Guide

DVD Disc Menus...

Some explanations in this manual describe DVD Disc Menus.DVD manufacturers set
the menus, which vary among DVDs. Not all DVDs have menus. If the DVD has a
menu, access it by pressing DVD, then DISC MENU on the remote control.

Details are on page 32.

DVD Player Setup Menu...

Some instructions explain how to use the DVD player’s Setup Menu to set up features
of the DVD player or a DVD. Access the DVD player menu by pressing SETUP on the
remote control when playback is stopped. Even if a feature is set in the DVD player’s
menu, it may not be available if the current DVD does not include that feature.

Available Disc Features...

All features described in this manual are not available on every disc. If the feature is

not available on the disc, you cannot use the DVD/VCR to make it
available. An “X” will appear in the top right corner of the TV screen if
you try to access a feature that is not currently available.

Disc Features

• Audio Language choices *

• Camera Angles *

• DVD menus in a desired
language *

• Markers

• MP3 Playback

• JPEG Playback

• Windows MediaTMAudio
Playback

• Dual Playback

• Parental Control *

• Paused/Fast/Slow/
Step-by-Step Playback

• Program Playback

• Progressive Scan

• Random Playback

• Repeat, A-B Repeat

• Resume On

• Specific Time/Title/
Chapter/Track Search

• Subtitles *

• Zoom

* If available on the disc

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 6

English

Playable Discs and Video Cassettes 7

Playable Discs

The DVD player will play Digital Video Discs (DVDs); finalized Digital Video Discs Recordable (DVD+R,DVD-R);
finalized Digital Video Discs Rewritable (DVD+RW,DVD-RW);Video Compact Discs (VCDs);Audio Compact
Discs (CDs); finalized Compact Discs Recordable (CD-R) and Compact Discs Rewritable (CD-RW).
To play a DVD, make sure it meets the requirements for Region Codes and Color Systems as described
below.Discs that have the following logos will play on the DVD player. Other disc types are not guaranteed
to play in the DVD/VCR.

• Do not stand the unit up vertically. Install the unit in a horizontal and stable position.

• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.

Windows Media is a trademark of Microsoft Corporation.
This unit is not compatible with Multiple Bit Rate

(MBR:a file that contains the same content encoded at several different bit rates).

ABOUT THE PBC FUNCTION OF VIDEO CD

This unit can play Video CD 1.1 (without PBC) and 2.0 (with PBC).
With version 2.0 (with PBC), you can use interactive menu (e.g., playlists) on the TV screen.
When playing a Video CD with PBC, some operations cannot be performed unless the PBC function is
cancelled temporarily. See page 32 for more details.

Region Codes

DVDs must be labeled for ALL regions or for Region 1 in order to play on this DVD player.You cannot play
DVDs that are labeled for other regions.
Look for the symbols below on your DVDs. If these region symbols do not appear on your DVD, you
cannot play the DVD in this player.

The number inside the globe refers to a region of the world. Region 1 represents the
United States, Canada, upper regions of North America, Bermuda, the U.S.Virgin

Islands, and small regions near Australia.
A disc encoded in a specific region format can only play on DVD players with the same region code. For
example, if a disc is labeled for Region 2, you cannot play the DVD on this player.

Color Systems

Different color systems are available throughout the world.The most common color systems are NTSC,
which is used primarily in the United States and North America, PAL, and SECAM.
This DVD player will play both NTSC and PAL DVDs.You cannot play DVDs recorded in other formats.
The color system of the DVD may be listed on the DVD or on the disc case.Your TV must have the NTSC
and/or PAL color system as well.

Playable Video Cassettes

The VCR of this DVD/VCR has a High Quality (HQ) system and is compatible with existing Video Home
System (VHS) equipment. Use only video cassettes that have the mark. The use of other tapes may
result in poor picture quality and excessive deposits on the video heads, which may not be covered by the
warranty if damage occurs.
The VCR also has a 19 micron head, which provides a better picture when you view tapes recorded in slow
speed (SLP).

Unacceptable Discs

If you insert an unacceptable type of disc, a Disc Error message may appear on the TV screen. The following
discs will not play on this DVD player.

• CD-ROM • Compact Disc-Interactive (CD-I) • DVD-RAM

• Video Single Disc (VSD) • DVD-ROM • DVD-Audio

• Unfinalized disc • DVD contains MP3, Windows MediaTMAudio or JPEG files

• Non-compatible recording mode

On the following disc, the sound may not be heard.

• Super Audio CD - Only the sound on the CD layer can be heard. The sound on the high-density Super

Audio CD layer cannot be heard.

is a trademark of DVD Format/Logo Licensing Corporation.

DVD

MP3

files

Audio

CD

CD-R

CD-RW

DVD+R DVD+RW Video

CD

DVD-RWDVD-R

Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.

E8E21UD_EN1.qxd 09.2.2 5:14 PM Page 7

English

8 Hookups

Determining the best possible connection...

Your hookup will be determined primarily by your existing equipment, especially your TV. These guidelines describe
which options have the best picture and sound quality. You will not use all the jacks on the DVD/VCR.

★★★★ If your TV has Component Video In jacks (which could be labeled Y CR CB, Y PR PB or YUV and may be

green, blue and red), use the Component Video jacks (Y C

B/PB CR/PR) for the best picture quality.If you use

only this video connection, only the DVD picture will be available. To see DVD features on the TV,set the TV
to its Component Video In channel. Component Video provides the best picture quality. See page 10.

Progressive Scan provides less flickering and higher image resolution than traditional (525i/480i or interlace)
TV signals.
If your TV has Progressive Scan (525p/480p or progressive), connect the TV to the DVD/VCR’s
COMPONENT VIDEO OUT (Y C

B/PBCR/PR

) jacks. Set Progressive Scan (PROG. SCAN) to ON in the

DVD/VCR’s DISPLAY Menu.See pages 50-5

1

.P.SCAN will appear on the DVD/VCR’s display panel. Set your TV to

Progressive Scan also

.

If your TV does not have Progressive Scan but has Component Video In jacks, connect them to
the DVD/VCR’s COMPONENT VIDEO OUT jacks (Y C

B/PB CR/PR). Set

Progressive Scan (PROG.SCAN)

to
OFF either in the DISPLAY Menu or by pressing and holding PLAY B (DVD) on the front of the DVD/VCR
for more than 5 seconds.See pages 50-51.

★★★ If your TV has an S-Video In jack(which also may be labeled Y/C or S-VHS),use the S-VIDEO OUT jack for

excellent picture quality. If you use only this video connection, only the DVD picture will be available.To see
DVD features on the TV,set the TV to its S-Video In channel. See page 10.

★★ If your TV has a single yellow Video In jack (which also may be labeled CVBS, Composite or baseband), use

the yellow DVD/VCR VIDEO OUT jack for good picture quality.This connection provides a picture for both
the DVD player and the VCR. To see DVD or VCR features on the TV, set the TV to its Video In channel. See
page 9

★★★★ If you have a Stereo with a Coaxial Digital Audio In jack, this provides the clearest sound for the DVD player.

Connect the DVD/VCR’s COAXIAL DIGITAL AUDIO OUT jack to your Stereo for the best sound quality.If
you use only this audio connection,only disc sound (no VCR) will be available. See page 12.

★★★ If digital audio connections are not possible, connect the DVD/VCR’s red and white DVD/VCR AUDIO OUT

jacks to the Audio In jacks of your Stereo or TV. This connection provides sound for both the DVD player
and the VCR. See pages 10-11.

Before you begin...

● Refer to the manuals of your TV, Cable Box,Stereo or other devices as necessary. Note the style of jacks and

connectors on the other equipment. Determine how to choose different Audio and Video In channels on your
other equipment so you can see and hear the DVD/VCR material playing on the TV,Stereo, etc.

● Disconnect all equipment from the power outlets. Connect the equipment to power only after you have finished

hooking up everything. Never make or change connections with equipment connected to power.

Remember...

● Set the TV to the correct Video In channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or

A/V IN, EXT1 or External In, etc. These channels often are located near channel zero (0). Or, your TV’s remote may
have a button or switch that selects the Video Input channel. See your TV manual for details. If you do not see the
DVD or VCR playback on the TV,go to the lowest TV channel (01 or 02) and change channels downward until you
see the DVD or VCR picture on the TV.
To help you find the right Audio/Video In channel, turn on the DVD/VCR.Press DVD to put the DVD/VCR in DVD
mode. With no disc in the player, a large DVD Video logo will appear on the TV screen when you get the TV on the
correct Audio/Video In channel.

● Set the Stereo to the correct channel or “source” mode.

● Depending on your connection, you may need to purchase additional cables or adaptors. If your TV or monitor has

BNC-type connectors, you will need an adaptor.

Once you determine the best option, find your choice on pages 9-12. Follow the steps for the hookup
you choose.Then, go to page 14 to complete the first-time setup.

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 8

English

Hookups (cont’d) 9

DIGITAL

AUDIO OUT

COAXIAL

AUDIO
OUT

DVD

L

R

LRL

R

S-VIDEO

OUT

COMPONENT
VIDEO OUT

Y

C

B

/

P

B

AUDIO OUT

DVD/VCR

VCR

VIDEO OUT

AUDIO IN

VIDEO IN

CR /
P

R

AUDIO IN

VIDEO IN

L

R

ANT. IN

AUDIO OUT

LR

VIDEO

OUT

OUTIN

Audio Cable
(not supplied)

RF coaxial cable
(not supplied)

RF coaxial cable
(not supplied)

External tuner

TV Signal

Audio Cable (supplied)

Video Cable

(not supplied)

Video Cable (supplied)

DVD/VCR

Back of TV

Connections

1

Connect a TV signal to the IN jack on the external
tuner.

2

Use an RF coaxial cable (not supplied) to connect
the OUT jack on the external tuner to the ANT. IN
jack on the TV.

3

Connect the red and white audio cable (supplied) to
the red and white AUDIO OUT jacks on the
external tuner and to the red and white VCR
AUDIO IN jacks on the DVD/VCR.

4

Connect the yellow video cable (supplied) to the
yellow VIDEO OUT jack on the external tuner and
to the VCR VIDEO IN jack on the DVD/VCR.

5

Connect another red and white audio cable (not
supplied) to the red and white DVD/VCR AUDIO
OUT jacks on the DVD/VCR and to the red and
white AUDIO IN jacks on the TV.

6

Connect another yellow video cable (not supplied)
to the DVD/VCR VIDEO OUT jack on the DVD/VCR
and to the VIDEO IN jack on the TV.

7

Connect the power cords of the TV and the DVD/VCR
to a power outlet.Turn on the TV and set it to the
correct Video In channel.

8

You are ready to turn on the DVD/VCR. Go to page 14
to complete the first-time setup.

●

You can record any unscrambled channel by selecting the channel
on the external tuner. Be sure that the external tuner is turned on.

●

Signal from the external tuner can be output only on CVBS output
even when the power of the DVD/VCR is off.

●

You cannot record one channel while watching another
channel.

DVD/VCR to An External Tuner

• If your TV has antenna in jack
only, it is still possible to connect
this unit to your TV by using a
commercially available stereo
audio/video RF modulator. Refer
to the manual accompanying the
modulator for more information.

• Required cables and connecting
methods differ depending on the
external tuner.
For more information,please
contact your external tuner
provider.

• Line through output
When an external device, such as
cable/satellite box, is connected
to L1(Rear) jacks of this
DVD/VCR,the signal from the
external device can be output
even when the power of the
DVD/VCR is off.

• Instead of using video out jack of
this DVD/VCR, you can also use
S-video out jack or component
video output jack for connecting
to your TV.

• Refer to the manual
accompanying external devices
for more information.

Helpful Hints

1

2

3

4

5

6

This DVD/VCR does not have a tuner input jack.To record TV programs on your DVD/VCR, you need to
connect this DVD/VCR to an external tuner device (e.g., set top box, cable box or satellite receiver) that
has audio/video output jacks.

e.g.)

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 9

English

10 Hookups (cont’d)

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

DVD

L

R

LRL

R

S-VIDEO

OUT

COMPONENT
VIDEO OUT

Y

C

B /

P

B

AUDIO OUT

DVD/VCR

VCR

VIDEO OUT

AUDIO IN

VIDEO IN

CR /
PR

AUDIO IN

S-VIDEO IN

L

R

Back of TV

Audio and

Video IN Jacks

on TV

Audio Cable
(supplied)

Video Cable

(supplied)

AUDIO

OUT

DVD

L

R

S-VIDEO

OUT

COMPONENT
VIDEO OUT

Y

C

B

/

P

B

CR /
P

R

AUDIO IN

Y

Cb/Pb

Cr/Pr

COMPONENT

VIDEO IN

L

R

Back of TV

AUDIO

OUT

DVD

L

R

S-VIDEO

OUT

COMPONENT
VIDEO OUT

Y

C

B

/

P

B

CR /
P

R

AUDIO IN

VIDEO IN

L

R

1

1

1

2

b

2

c

2

a

1

Connect the red and white audio cable (supplied) to the
red and white DVD or DVD/VCR AUDIO OUT jacks on
the DVD/VCR and to the red and white AUDIO IN jacks
on the TV.

● If you are using DVD/VCR AUDIO OUT jacks for your

audio connection, use 2a method for your video connection.
If you are using DVD AUDIO OUT jacks for your audio
connection, use 2b or 2c method for your video connection.

2

a

Connect the yellow video cable (supplied) to the
DVD/VCR VIDEO OUT jack on the DVD/VCR and to
the VIDEO IN jack on the TV. TheVIDEO IN jack on the TV

is usual

ly yellow and may be labeled CVBS, Composite or

Baseband video.

2

b

Connect component video cable (not supplied) to the
COMPONENT VIDEO OUT jacks on the DVD/VCR
and to the COMPONENT VIDEO IN jacks on the TV.

The Co

mponent Video In jacks on the TV are usually red,

blue and green.

2

c

Connect an S-Video cable (not supplied) to the
S-VIDEO OUT jack on the DVD/VCR and to the
S-VIDEO IN jack on the TV.

3

Connect the power cords of the TV and the DVD/VCR to
a power outlet.Turn on the TV and set it to the correct
Video In channel.

If you are using the yellow video cable for VCR playback, choose
the Video In channel at your TV. To find the correct Video In
channel, go to your lowest TV channel and change channels
downward until you see VCR playback on the TV screen. To help
you find the right Video In channel, turn on the DVD/VCR. Press
DVD to put the DVD/VCR in DVD mode. With no disc in the
player, a large DVD Video logo will appear on the TV screen when
you get the TV on the correct Video In channel.

4

You are ready to turn on the DVD/VCR. Go to page 14 to
complete the first-time setup.

DVD/VCR to a TV that has Audio/ Video, Component Video or S-Video In jacks

• Match the cable colors to the
jack colors. If the TV has a single
AUDIO IN jack, use the white
audio cable to connect the
DVD/VCR’s white AUDIO OUT
(left) jack to the TV’s AUDIO IN
jack.You will not use the red
cable. Or,purchase a “splitter”
audio cable to go from the
left/right AUDIO OUT jacks of
the DVD/VCR to the TV’s single
AUDIO IN jack.

Helpful Hint

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 10

Hookups (cont’d) 11

DVD/VCR to a TV and a Stereo

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

DVD

L

R

LRL

R

S-VIDEO

OUT

COMPONENT
VIDEO OUT

Y

C

B

/

P

B

AUDIO OUT

DVD/VCR

VCR

VIDEO OUT

AUDIO IN

VIDEO IN

CR /
P

R

VIDEO IN

AUDIO (LEFT) IN

AUDIO (RIGHT) IN

1

Connect the supplied red and white audio cable to the red and white
DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and
white AUDIO IN jacks on the Stereo. Match the cable colors to the jack

colors.

2

Connect the supplied yellow video cable to the DVD/VCR VIDEO
OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV.

To use Component Video cable or S-Video cable instead for the DVD player,
see page 10. You will still need the yellow video cable for VCR features.

3

Connect the power cords of the DVD/VCR,TV and Stereo to a
power outlet.Turn on the TV and set it to the Video In channel. Or,

simply go to your TV’s lowest channel (01 or 02) and continue changing
channels downward at the TV until you see VCR or DVD playback on the TV
screen.

To help you find the right Video In channel at the TV, turn on the DVD/VCR. Press
DVD to put the DVD/VCR in DVD mode.With no disc in the player, a large DVD
Video logo will appear on the TV screen when you get the TV on the correct
Video In channel.

Turn on the Stereo and set it to the correct auxiliary or source mode.

Check your Stereo manual for details.

4

You are ready to turn on the DVD/VCR. Go to page 14 before
turning on the DVD/VCR.

2

1

English

Back of TV

(example only)

Stereo

Video Cable

(supplied)

Audio Cable
(supplied)

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 11

English

1

Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s
COAXIAL DIGITAL AUDIO OUT jack and to the COAXIAL DIGITAL
AUDIO IN jack on the Stereo.

This digital audio connection only provides sound for the DVD player of the DVD/VCR.
So, in order to use the VCR features, connect the supplied red/white audio cable. To
connect the red/white audio cable, see step 5 on page 9.

2

Connect the supplied yellow video cable to the yellow DVD/VCR VIDEO
OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV. To use

component video cable or S-Video cable instead for the DVD player, see
page 10. You will still need the yellow video cable for VCR features.

3

Plug in the power cords of the Stereo,TV and DVD/VCR.Turn on the
Stereo and select its Auxiliary IN channel.Turn on the TV and set it to
the correct Video In channel. Go to your TV’s lowest channel (01 or 02) and

change channels downward until you see DVD or VCR material on the TV screen.
To help you find the right Video In channel on the TV, turn on the DVD/VCR.Press
DVD to put the DVD/VCR in DVD mode. With no disc in the player, a large DVD
Video logo will appear on the TV screen when you get the TV on the correct Video
In channel.

Make sure

Progressive Scan (PROG.SCAN)

is OFF and P.SCAN does not appear on

the DVD/VCR’s display panel. Disable

Progressive Scan either in the DISPLAY
Menu or by pressing and holding PLAY B (DVD) on the front of the
DVD/VCR for more than 5 seconds. Details are on pages 8 and 51.

4

You are ready to turn on the DVD/VCR.Go to page 14 before turning on
the DVD/VCR.

Remember...

Some DVDs are recorded in Dolby Digital Multi-channel Surround Sound. Select Dolby
Digital Multi-channel Surround Sound in the DVD Disc Menu. If Dolby Digital Surround
Sound is not recorded on the disc, you will not have surround sound available.
If you connect the DVD/VCR to a Dolby Digital Stereo,set DOLBY DIGITAL to
BITSTREAM in the DVD player’s Setup Menu. Details are on page 52. If the DVD/VCR is not
connected to a Dolby Digital-compatible Stereo,set DOLBY DIGITAL to PCM.
Incorrect settings may cause noise distortion and damage the speakers.

12 Hookups (cont’d)

DVD/VCR to a TV and to a Stereo that is Dolby Digital-compatible

Using Digital Audio connections

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

DVD

L

R

LRL

R

S-VIDEO

OUT

COMPONENT
VIDEO OUT

Y

C

B

/

P

B

AUDIO OUT

DVD/VCR

VCR

VIDEO OUT

AUDIO IN

VIDEO IN

CR /
P

R

VIDEO IN

COAXIAL
DIGITAL
AUDIO IN

1

2

Back of TV

(example only)

Stereo

Video Cable

(supplied)

Coaxial Digital Audio

Cable (not supplied)

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 12

English

Remote Control Setup 13

Putting Batteries in the Remote Control

1

Remove the battery compartment lid on the bottom
of the remote control by pressing the tab, then lifting the
lid.

2

Place two AA batteries inside the battery
compartment with their

+ and –

ends aligned as
indicated.

3

Replace the battery compartment lid.

Using the Remote Control

● Point the remote control at the DVD/VCR’s remote sensor (see

page 18) when using the remote to operate the DVD/VCR. Do
not point the remote at the TV.

● Do not put objects between the remote and the DVD/VCR.

Recycling Guidelines/Battery Safety

● Your new product and its packaging contain materials that can

be recycled and reused. Specialized companies can recycle your
product to increase the amount that needs to be properly
disposed. Your product uses batteries that should not be
thrown away when depleted but should be disposed of as small
chemical waste. Please find out about the local regulations on
disposal of your old product, batteries and packaging whenever
you replace existing equipment.

● Battery Usage CAUTION - To prevent battery leakage that may

result in bodily injury, property damage or damage to the unit:

• Install ALL batteries correctly, with the

+ and –

markings on

the battery aligned as indicated on the unit.

• Do not mix batteries, for example, old with new or carbon
with alkaline.

• Remove batteries when the unit will not be used for a long
time.

1

2

3

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 13

English

14 First-time DVD/VCR Setup

3

Press K or L to select ENGLISH, FRANCAIS
(French) or ESPAÑOL (Spanish) as the language for
VCR On-Screen Displays and menus.Then, press B.

● To put the DVD/VCR in VCR mode, press VCR so VCR

light appears.

•To skip this feature and play a
tape immediately, insert a tape
with its record tab removed.

• Repeat this process if the power
fails.

Helpful Hints

Before turning on your DVD/VCR, make sure batteries are in the
remote control and the DVD/VCR and TV are connected correctly.

These menus may not appear if you have already turned
on the DVD/VCR.

1

Turn on the TV.Set it to the correct Video In
channel. (Check your TV owner’s manual for details.)

2

Pressy. VCR light will appear on the front of the
DVD/VCR.The display shown below will appear.
These menus may not appear if you have already turned on
the DVD/VCR.You may have turned on the DVD/VCR
before to find the Audio/Video In channel of the TV, for
example. If so, follow the steps on page 20 to select a
language for the VCR menus.

1

Turn on the TV.

DVDVCR SETUP

INPUT

MENU

REC SPEED MODE

ANGLE SEARCH REPEAT

DISPLAY SUBTITLE ZOOM

TIMER SET

REPEAT

A-B

AUDIO

BACKPAUSESTOP

PLAYOKFFW

REW

CLEAR TITLE

DISC

TRACKING

OPEN/CLOSE

12

6

5

4

7

8

9

0

+10

3

2

3

LANGUAGE SELECT

BENGLISH [ON]

FRANCAIS
ESPAÑOL

PUSH B

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 14

English

Video Cassette Playback 15

• Other tape playback features are
on pages 29-32.

• If AUTO REPEAT is ON,playback
will begin when you insert a tape,
even when the record tab is
intact. Details are on page 29.

•You must connect the DVD/VCR
to a TV using the audio/video
cables in order to use the VCR
features.These hookups are
explained on pages 9 and 11.

Helpful Hints

Read and follow the steps below to play a tape.

1

Turn on the TV.Set it to the correct Video In
channel. (Check your TV owner’s manual for details.)

Details are on page 8.

2

Insert a tape in the cassette compartment of the
DVD/VCR.VCR light will appear on the front of the

DVD/VCR. If the tape’s record tab has been removed,
playback will start automatically.
If the DVD/VCR power is already on, press VCR to put the
DVD/VCR in VCR mode if necessary.VCR light will appear
on the front of the DVD/VCR.

● If playback does not start automatically, press VCR, then

press PLAY B.

● Press STOP C to stop playback.

● Press REW h to rewind the tape.

● After the tape stops, press STOP/EJECT CA on the front

of the DVD/VCR to remove the tape.

1
2

Turn on the TV.

Insert a tape in the
DVD/VCR.

DVDVCR SETUP

INPUT

MENU

REC SPEED MODE

ANGLE SEARCH REPEAT

DISPLAY SUBTITLE ZOOM

TIMER SET

REPEAT

A-B

AUDIO

BACKPAUSESTOP

PLAYOKFFW

REW

CLEAR TITLE

DISC

TRACKING

OPEN/CLOSE

12

6

5

4

7

8

9

0

+10

3

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 15

English

16 Disc Playback

• An “X” may appear at the top right

corner of the TV screen when you
try a feature. Either the feature is
not available on the disc, or the
DVD/VCR cannot access the
feature at this time. This does not
indicate a problem with the
DVD/VCR.

• If a disc is dirty or scratched, the
picture may appear distorted or
playback may stop. In such cases,
remove the disc and turn off the
DVD/VCR. Disconnect the power
cord, then reconnect it. Clean the
disc, then turn on the DVD/VCR
again and reinsert the disc for
playback.

• If a disc has multiple layers, the
picture may freeze occasionally. This
happens when the first layer
switches to the second layer. This is
not a malfunction.

• When the DVD or CD light
appears on the display panel, the
disc is loaded and ready for
playback.

• When you press OPEN/CLOSE A
or PLAY B (DVD) on the front of
the DVD/VCR when the power is
off, the DVD/VCR will turn on in
DVD mode. Otherwise, the
DVD/VCR will turn on in the mode
in which it was turned off.

• If you use PLAY B to close the disc
tray, playback starts automatically. If
you use OPEN/CLOSE A to close
the disc tray, you have to press
PLAY B to start playback.

Helpful Hints

Before you begin, turn on the TV, Stereo and other equipment
connected to the DVD/VCR. Make sure the TV and the Stereo (if
applicable) are set to the correct channel.

Details are on pages 8-12.

1

Pressy to turn on the DVD/VCR.

2

Press DVD so DVD light appears on the front of the
DVD/VCR.

3

Press OPEN/CLOSE A to open the disc tray.

4

Place a disc onto the tray. If the DVD is recorded on
only one side, place the disc on the tray with the label
facing up and the shiny side facing down. Some DVDs are
recorded on both sides. Make sure the label of the side you
want to play is facing up.

5

Press PLAY B to close the tray.The tray will close and
playback will begin. If playback does not start automatically,
press PLAY B again.
If a DVD Menu appears instead,see page 32.
To play MP3, Windows MediaTMAudio or JPEG files, see
pages 43-44.
You also can close the tray by pressing
OPEN/CLOSE A.

● Press STOP C to stop playback.

Insert a disc.

4

REMINDER:This DVD/VCR

will play only certain discs.

See page 7 for details.

DVDVCR SETUP

INPUT

MENU

BACKPAUSESTOP

PLAYOKFFWREW

CLEAR TITLE

DISC

TRACKING

OPEN/CLOSE

12

6

5

4

7

8

9

0

+10

3

1

2

5

3

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 16

English

Display Panel 17

Appears after the disc tray
closes if the tray is empty,
if there is an error reading
the disc, or if an unacceptable
disc is installed.

Tr ay is opening or is open.

Tr ay is closing.

Disc is loading.

Appears when Playback
Control is active (Video CD).

Display Messages

STOP PLAY

REW F.FWD PLAY

REC TRACKINGSTOP/EJECT

VIDEO AUDIOLR

ONE TOUCH RECORDING • LONG PLAY

SOURCE

STANDBY-ON

VCR DVD

DVD

DVD PLAYER/VCR DVP3345V

OPEN/CLOSE

REC

PM

GROUP P.SCAN

DVD

VCD

Disc tray

Insert a disc here.

DVD light

This light appears when the DVD/VCR is in
DVD mode. You can only watch DVDs when
DVD light is on. To make DVD light come
on, press SOURCE on the front of the
DVD/VCR or DVD on the remote control.

Display

Messages about current disc operations
appear here. See Display Messages below.

VCR light

This light appears when the DVD/VCR is in VCR mode. You can only
watch videotapes or access VCR features when VCR light is on.
To make VCR light come on, press VCR on the remote control or
SOURCE on the front of the DVD/VCR.

Cassette
Compartment

Insert a video
cassette here.

Appears when a repeat function
is active.

Appears when
A-B Repeat is on.

Appears when
ALL Repeat is on.
(Video CD, CD, MP3,
Windows MediaTM Audio
and JPEG)

Appears when disc playback
is paused.

Appears during Slow Motion
Playback (DVD, Video CD).

Appears during Slow Motion
Playback.

Appears during disc playback.

Displays the current disc type.

• DVD: DVD

• VCD: Video CD

• CD: Audio CD, MP3,
Windows Media

TM

Audio,

JPEG

Appears when Progressive
Scan is active.

Indicates a tape is in the DVD/VCR.

Appears during playback when
the Auto Repeat function is on.

Appears if tape playback
is paused.

Appears during tape playback.

Indicates the elapsed playing time of a tape; also displays a selected
external input channel, tape speed, remaining time for an
OTR or the current time.

Indicates current time is P.M.
There is no A.M. indication.

Appears during recording;
flashes when recording is
paused.

Appears when an OTR, Timer Recording,
or Satellite Link has been set.

Displays the elapsed time of the title
or track.
The number of a new title, chapter, or
track is displayed for 3 seconds when
a chapter or track is switched, or
DISPLAY is pressed during playback.

DVD Display Panel

VCR Display Panel

E8E21UD_EN1.qxd 09.2.2 5:14 PM Page 17

English

18 Front Panel, Rear Panel and Remote Control

• The DVD S-VIDEO OUT,
DVD COMPONENT
VIDEO OUT, DVD
AUDIO OUT and DVD
COAXIAL DIGITAL
AUDIO OUT jacks are
only useful in DVD mode.
To have sound and picture
in VCR mode, you must
connect the audio/video
cables supplied. Details are
on pages 9-11.

Helpful Hint

•For DVD player features,
press DVD before
pressing other buttons.
To put the DVD/VCR in
DVD mode, press DVD
or SOURCE so DVD
light appears on the front
of the DVD/VCR.

•For VCR features, press
VCR before pressing
other buttons.To put the
DVD/VCR in VCR mode,
press VCR or SOURCE
so VCR light appears on
the front of the
DVD/VCR.

Helpful Hints

STOP PLAY

REW F.FWD PLAY

REC TRACKINGSTOP/EJECT

VIDEO AUDIOLR

ONE TOUCH RECORDING • LONG PLAY

SOURCE

STANDBY-ON

VCR DVD

DVD

DVD PLAYER/VCR DVP3345V

OPEN/CLOSE

VCR AUDIO and
VIDEO IN jacks (L2)

ySTANDBY-ON Button

REW h Button (VCR)

F.FWD g Button (VCR)

STOP/EJECT C A Button (VCR) PLAY B Button (VCR)

REC I
Button (VCR)

SOURCE Button

STOP C Button (DVD)

PLAY B Button (DVD)

OPEN/CLOSE A Button (DVD)

TRACKING

K/L

ButtonsRemote Sensor

DIGITAL

AUDIO OUT

COAXIAL

AUDIO

OUT

DVD

L

R

LRL

R

S-VIDEO

OUT

COMPONENT
VIDEO OUT

Y

C

B /

PB

AUDIO OUT

DVD/VCR

VCR

VIDEO OUT

AUDIO IN

VIDEO IN

CR /
PR

DVD/VCR AUDIO and VIDEO OUT jacks

DVD COMPONENT
VIDEO OUT jacks

DVD AUDIO
OUT jacks

AC Power Cord

DVD COAXIAL
DIGITAL AUDIO
OUT jack

DVD S-VIDEO
OUT jack

VCR AUDIO and
VIDEO IN jacks (L1)

DVDVCR SETUP

INPUT

MENU

REC SPEED MODE

ANGLE SEARCH REPEAT

DISPLAY SUBTITLE ZOOM

TIMER SET

REPEAT

A-B

AUDIO

BACKPAUSESTOP

PLAYOKFFWREW

CLEAR TITLE

DISC

TRACKING

OPEN/CLOSE

12

6

5

4

7

8

9

0

+10

3

SEARCH Button

SUBTITLE Button

SETUP Button

VCR Button

INPUT Button

s B KL Buttons

REW h Button

STOP C Button

PLAY B Button

ANGLE Button

y (

STANDBY-ON

) Button

OPEN/CLOSE 0 Button

TITLE Button

CLEAR Button

DVD Button

DISC MENU Button

OK Button

PA USE k Button

FFW g Button

REC I Button

w (SKIP) Button

∑ (SKIP) Button

DISPLAY Button

SPEED Button

Number Buttons

AUDIO Button

MODE Button

TRACKING KL Button

ZOOM Button

TIMER SET Button

REPEAT Button

A-B REPEAT Button

BACK Button

Front Panel

Rear Panel

Remote Control

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 18

Clock (VCR) 19

- M E N U -

BTIMER PROGRAMMING

SATELLITE LINK
AUTO REPEAT [OFF]
CLOCK SET
LANGUAGE SELECT

English

• If the clock has never been set,
the CLOCK SET Menu may
appear when you press SETUP.
If so, follow the instructions
from step 3 above.

•Press DISPLAY repeatedly to
show the time on the TV
screen.

•Power failures of more than 30
seconds can erase the Clock
Setting.

•To reset the clock, follow steps
1-2. Select the information you
want to change using s or B.
When the information is
flashing, use K or L to enter
the correct information. Press
CLEAR to set the clock.

Helpful Hints

2-9

DVDVCR SETUP

INPUT

MENU

REC SPEED MODE

ANGLE SEARCH REPEAT

DISPLAY SUBTITLE ZOOM

TIMER SET

REPEAT

A-B

AUDIO

BACKPAUSESTOP

PLAYOKFFW

REW

CLEAR TITLE

DISC

TRACKING

OPEN/CLOSE

12

6

5

4

7

8

9

0

+10

3

1

MONTH DAY YEAR
0 3 / – – – – – –

HOUR MINUTE AM/PM
– – : – – – –

CLOCK SET

Follow these steps to set the VCR clock. Make sure:

1

Press VCR, then press SETUP so MENU appears. If the
clock has never been set, the CLOCK SET Menu may
appear when you press SETUP. If so, follow the instructions
from step 3 on this page.

2

Press K or L to select CLOCK SET.Then, press B.

3

While the MONTH space is flashing, press K or L
until the month appears. Then, press B.

4

While the DAY space is flashing, press K or L until
the day appears.Then, press B.

5

While the YEAR space is flashing, press K or L
until the year appears.Then, press B. The day of

the week will appear automatically.

6

While the HOUR space is flashing, press K or L
until the hour appears. Then, press B.

7

While the MINUTE space is flashing, press K or L
until the minute appears. Then, press B.

8

While the AM or PM space is flashing, press K or L
to point to AM or PM.

Your selection will flash on the screen in the AM/PM space.

9

Press CLEAR or B to start the clock.

9

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 19

Follow the steps below to change the language of the VCR
On-Screen Displays and menus.

1

Press VCR, then press SETUP so MENU appears.

2

Press K or L to choose LANGUAGE SELECT,
then press B.

3

Press K or L to choose ENGLISH, FRANCAIS
(French) or ESPAÑOL (Spanish).

4

Press CLEAR to remove the menu.

• If you select FRANCAIS
(French), or ESPAÑOL (Spanish)
and need English:

1)Press SETUP so MENU

appears.

2) Press L to choose

SELECTION LANGUE or
SELEC. IDIOMA, then press B.

3) Press K or L to select

ENGLISH.

4) Press CLEAR.

Helpful Hint

LANGUAGE SELECT

BENGLISH [ON]

FRANCAIS
ESPAÑOL

2-3

4

- M E N U -

BTIMER PROGRAMMING

SATELLITE LINK
AUTO REPEAT [OFF]
CLOCK SET
LANGUAGE SELECT

DVDVCR SETUP

INPUT

MENU

PLAYOKFFWREW

CLEAR TITLE

DISC

TRACKING

6

5

4

7

8

9

0

+10

1

English

20 Language (VCR)

DVDVCR SETUP

INPUT

MENU

REC SPEED MODE

ANGLE SEARCH REPEAT

DISPLAY SUBTITLE ZOOM

TIMER SET

REPEAT

A-B

AUDIO

BACKPAUSESTOP

PLAYOKFFW

REW

DISC

1-3

You may access Status Displays by pressing DISPLAY.The displays
may include the current time, external input channel and other
information.

1

Press DISPLAY. The COUNT Display will appear for 5
seconds. After 5 seconds, only the real-time tape counter
will appear. This counter shows you the elapsed playing
time of the tape (from the point at which the counter was
set to 0). The counter also will appear on the display panel
on the front of the DVD/VCR.

2

Press DISPLAY again. The CLOCK Display will appear
for 5 seconds. After 5 seconds, only the time will appear.
The time also will appear on the display panel on the front
of the DVD/VCR.

3

Press DISPLAY again to remove all the displays.

VCR Status Displays

•

You cannot access a Status
Display when viewing a still
picture, during slow motion, or
during Forward and Reverse
Searching.

Helpful Hint

STOP

SLP 0:12:34

STOP 5:40 PM

L2

SLP

E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 20