Philips DVD870P, DVD870L User Manual

DVD Video Player Owner’s Manual
DVD870 DVD870L DVD870P
1
Important Note
DK
funktion. Undgå u tsættelse for stråling.
Bemærk: Netafbryderen POWER er sekundært indkoblet og afbryder ikke
strømmen fra nette. Den indbyggede netdel er derfor tilsluttet til lysnettet så længe netstikket sidder i stikkontakten.
N
Observer: Nettbryteren POWER er sekundert innkoplet. Den
innebygdenetdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.
This product incorporates copyright protection
technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
S
Klass 1 laserapparat Varning! Om apparaten används på annat sätt än i denna bruksanvisning
specificerats, kann användaren utsättas för laserstrålning, som översjruder gränsen för läserklass 1.
Observera! Strömbrytaren POWER är sekundärt kopplad och inte bryter
strömmen fråan nätet Den inbyggda nätdelen är därför ansluten till elnätet så länge stickproppen sitter i v ägguttaget.
SF
Luokan 1 laserlaite + Klass 1 laserapparat Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla
tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle lasersäleilille.
Huom. Toiminnanvalitsin POWER on kytketty toisiopuolelle, eikä se kytke
laitetta irti sähköverkosta. Sisäänrakennettu verkko-osa on kytkettynä sähköverkkoon aina silloin, kun pistoke on pistorasiassa.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished Works.
© 1992 - 1997 Dolby Laboratories, Inc. All rights
reserved.
Important Note for Users in the UK
Mains plug
This apparatus is fitted with an approved 13 Amp plug.To
change a fuse in this type of plug proceed as follows:
1 Remove fuse cover and fuse.
2 Fix new fuse which should be a BS1362 5 Amp,
A.S.T.A. or BSI approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5
Amp. If a plug without a fuse is used, the fuse at the
distribution board should not be greater than 5 Amp.
Note:The severed plug must be disposed of to avoid a possible
shock hazard should it be inserted into a 13 Amp socket
elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L).
As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:
Connect the blue wire to the terminal marked N or coloured black.
Connect the brown wire to the terminal marked L or coloured red.
Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.
Copyright in the U.K. Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.
2
IMPORTANT NOTE
Index
English -------------------------------------------------------- 5
English
Français ------------------------------------------------------23
Français
Deutsch -----------------------------------------------------41
Deutsch
Nederlands ------------------------------------------------- 59
Svenska ------------------------------------------------------77
Dansk -------------------------------------------------------- 95
Suomi ------------------------------------------------------ 113
Norge------------------------------------------------------ 131
Nederlands
Svenska
Dansk
Suomi
Norge
INDEX
3
General Information
The region code for this set is 2.
2
Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen. The disc will not playback, and should be unloaded.
NOTE: PICTURES SHOWN MAYBE DIFFERENT BETWEEN COUNTRIES.
NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON.
CAUTION (WARNING LOCATION: ON THE BACKPLATE OF SET)
Laser safety
This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
LASER
Type Semiconductor laser GaAlAs Wave length 650 nm (DVD)
780 nm (VCD/CD)
Output Power 7 mW (DVD)
10 mW (VCD/CD)
Beam divergence 60 degree
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents issued and pending. “DTS” and “DTS DIGITAL SURROUND” are trademarks of Digital Theater Systems, Inc. © 1996 Digital Theater Systems, Inc. All rights reserved.
The DVD VIDEO player is in conformity with the EMC directive and low-voltage directive.
TruSurround and the SRS symbol are trademarks of SRS Labs., Inc. TruSurround technology is manufactured under license from SRS Labs., Inc.
CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING UNDGÅ UDSÆTTELSE FOR STRÅLING VARNING SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD BETRAKTA EJ STRÅLEN VARO! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET NICHT DEM STRAHL AUSSETSEN ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D’OUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU
For Customer Use:
Read carefully the information located at the bottom of your DVD VIDEO player and enter below the Serial No.Retain this information for future reference.
Model No. DVD VIDEO Serial No. __________________________
4
GENERAL INFORMATION
Contents
Introduction
Philips DVD Video Introduction ------------------------- 6 Unpacking ---------------------------------------------------- 6 Remote Control Battery Installation ------------------- 6 Environmental Information ------------------------------- 6 Safety Information ------------------------------------------ 6 Cleaning Discs ---------------------------------------------- 6
Functional Overview
Front and Rear Panels ------------------------------------- 7 Remote Control -------------------------------------------- 8
Preparation
General Notes ---------------------------------------------- 9 Connecting to a TV ---------------------------------------- 9 Connecting to Optional Equipment ----------------- 9-10 NTSC/PAL Settings ----------------------------------------10 NTSC/PAL Conversion -----------------------------------10 General Explanation -------------------------------------- 10 Initial Setup ------------------------------------------------- 11 Menu Bar/Status Window -------------------------------- 11 Temporary Feedback Field Icons ----------------------- 12 Personal Preferences ----------------------------------12-13
English
Operation
Loading Discs----------------------------------------------- 14 Playing a DVD Video and Video CD Disc-------------- 14 General Features --------------------------------------14-16 Special DVD Features -------------------------------------16 Special VCD & SVCD Features-------------------------- 17 Playing an Audio CD -------------------------------------- 17 FTS Programme---------------------------------------- 17-18 MP3 Disc Features ---------------------------------------- 18
Access Control
Access Control: Child Lock ----------------------------- 19 Access Control: Parental Control ------------------19-20
Before Requesting Service
Before Requesting Service ------------------------------- 21
Specifications
Specifications -----------------------------------------------22
CONTENTS
5
Introduction
English
Philips DVD Video Introduction
Your Philips DVD Video player will playback digital video discs conforming to the universal DVD Video standard. The unique features of DVD Video, such as selection of sound track, subtitle languages and different camera angles (disc dependent), are all supported. In addition to DVD Video discs, you will be able to playback all Video CDs, SVCDs and Audio CDs.
DVD Video
You will recognise DVD Video discs by the logo shown. Depending on the material on the disc (a movie, video clips, a drama series, etc.) the disc may have one or more Titles.
DVD-VIDEO DISC
TITLE 1 TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2 CHAPTER 3
Video CD
You will recognise Video CDs by the logo shown.
Super Video CD (SVCD)
SVCDs are based on the Super VCD IO Standard, referring to the Standard of Electronics Industry of the People’s Republic of China.
Audio CD
Audio CDs contain music tracks only. You will recognise Audio CDs by their logo shown.
MP3 (MPEG Audio Layer-3)
This player supports the MP3 format which contains compressed music tracks.
Note: – Only the first session of multisession discs is supported.
Unpacking
First check and identify the contents of your DVD Video player package.
You should have the following items. – DVD Video player – Remote Control with batteries – Audio cable – SCART cable – Instructions for use
If any item is damaged or missing, contact your retailer or
Philips.
Keep the packaging materials for future transportation.
Remote Control Battery Installation
Insert batteries as indicated inside the battery
compartment.
Caution: Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.)
­+
+
-
Environmental Information
Your system consists of materials which can be recycled
and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Safety Information
Do not expose the system to excessive moisture, rain, sand
or heat sources.
Place the player on a firm, flat surface. Keep the player away from domestic heating equipment
and direct sunlight.
In a cabinet, allow about 2.5 cm (1 inch) of free space all
around the player for adequate ventilation.
If the DVD Video player cannot read CDs/DVDs correctly,
use a commonly available cleaning CD/DVD to clean the lens before taking the DVD Video player to be repaired. Other cleaning methods may destroy the lens. Always keep the tray closed to avoid dust on the lens.
The lens may cloud over when the DVD Video player is
suddenly moved from cold to warm surroundings. Playing a CD/DVD is not possible then. Leave the power on for about one hour with no disc in the unit until normal playback is possible.
Cleaning Discs
When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the centre out, in a straight line.
Do not use solvents such as benzine, thinner, commercially
available cleaners, or anti-static spray intended for analog discs.
6
INTRODUCTION
Functional Overview
Front and Rear Panels
STANDBY-ON (B/I)
– switches the player to Standby mode or ON
SOUND
– selects Stereo, Dolby Surround or 3D Sound (TruSurround)
STANDBY-ON
NEXTPREVSOUND
Disc Tray
T NEXT
– goes to next chapter or track
S PREV
– goes to previous chapter or track
; PAUSE
– interrupts playback
B PLAY
– starts playback
DISPLAY
– shows the current status of the player
OPEN/CLOSE
STOP
PLAY
PAUSE
/ OPEN/CLOSE
– opens/closes the disc tray
9 STOP
– stops playback
English
MAINS (AC Power)
– connect to power source
COAXIAL (Digital audio out)
– connect to digital (coaxial) audio equipment
OPTICAL (Digital audio out)
– connect to digital (optical) audio equipment
SUBW. (Subwoofer)
– connect to an active subwoofer
DIGITAL AUDIO OUT
PCM-MPEG2-Dolby Digital-DTS
COAXIAL
OPTICAL
SUBW.
S-VIDEO OUT (Y/C)
– connect to a TV with S-Video (Y/C) inputs
TV OUT VIDEO OUT
– connect to a TV with SCART
(CVBS) VIDEO OUT
– connect to a TVwith CVBS video inputs
AUDIO OUT (Left/Right)
– connect to an amplifier, receiver or stereo
system
TV OUT
R
AUDIO OUT
L
(CVBS)
VIDEO OUT
(Y/C)
S-VIDEO OUT
Caution: Do not touch the inner pins of the jacks on the rear panel connectors. Electrostatic discharge may cause permanent damage to the unit.
FUNCTIONAL OVERVIEW
7
Loading...
+ 15 hidden pages