Philips DVD640 User Manual
3139 246 11xxx
Important Note
DK
Advarsel:
Laserrudstråling ved åbning når sikkerhesafbrydere er ude af
funktion.Undgå u tsættelse for stråling.
Bemærk:
Netafbryderen POWER er sekundært indkoblet og afbryder ikke
strømmen fra nette. Den indbyggede netdel er derfor tilsluttet til
lysnettet så længe netstikket sidder i stikkontakten.
N
Observer:
Nettbryteren POWER er sekundert innkoplet. Den
innebygdenetdelen er derfor ikke frakoplet nettet så lenge apparatet
er tilsluttet nettkontakten.
S
Klass 1 laserapparat
Varning!
Om apparaten används på annat sätt än i denna bruksanvisning
specificerats,kann användaren utsättas för laserstrålning, som
översjruder gränsen för läserklass 1.
Observera!
Strömbrytaren POWER är sekundärt kopplad och inte bryter
strömmen fråan nätet Den inbyggda nätdelen är därför ansluten till
elnätet så länge stickproppen sitter i v ägguttaget.
SF
Luokan 1 laserlaite + Klass 1 laserapparat
Varoitus!
Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla
tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle
lasersäleilille.
Huom.
Toiminnanvalitsin POWER on kytketty toisiopuolelle, eikä se kytke
laitetta irti sähköverkosta. Sisäänrakennettu verkko-osa on
kytkettynä sähköverkkoon aina silloin,kun pistoke on pistorasiassa.
Important Note for Users in the UK
Mains plug
This apparatus is fitted with an approved 13 Amp plug.To
change a fuse in this type of plug proceed as follows:
1 Remove fuse cover and fuse.
2 Fix new fuse which should be a BS1362 5 Amp,
A.S.T.A. or BSI approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5
Amp.If a plug without a fuse is used, the fuse at the
distribution board should not be greater than 5 Amp.
Note:The severed plug must be disposed of to avoid a possible
shock hazard should it be inserted into a 13 Amp socket
elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following
code: blue = neutral (N), brown = live (L).
As these colours may not correspond with the colour
markings identifying the terminals in your plug, proceed as
follows:
• Connect the blue wire to the terminal marked N or
coloured black.
• Connect the brown wire to the terminal marked L
or coloured red.
• Do not connect either wire to the earth terminal in
the plug, marked E (or e) or coloured green
(or green and yellow).
Before replacing the plug cover, make certain that the cord grip
is clamped over the sheath of the lead - not simply over the
two wires.
Copyright in the U.K.
Recording and playback of material may require
consent. See Copyright Act 1956 and The Performer’s
Protection
Acts 1958 to 1972.
3139 246 11xxx
Index
English -------------------------------------------------5
English
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AVOID EXPOSURE TO BEAM
ADVARSEL
SYNLIG OG USYNLIG LASERSTRÅLING VED
ÅBNING UNDGÅ UDSÆTTELSE FOR
STRÅLING
VARNING
SYNLIG OCH OSYNLIG LASERSTRÅLNING
NÄR DENNA DEL ÄR ÖPPNAD BETRAKTA
EJ STRÅLEN
VARO!
AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA
NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE. ÄLÄ
KATSO SÄTEESEEN
VORSICHT
SICHTBARE UND UNSICHTBARE
LASERSTRAHLUNG WENN ABDECKUNG
GEÖFFNET NICHT DEM STRAHL
AUSSETSEN
ATTENTION
RAYONNEMENT LASER VISIBLE ET INVISIBLE
EN CAS D’OUVERTURE EXPOSITION
DANGEREUSE AU FAISCEAU
3
3141 016 19691
General Information
English
The region code for this set is 2.
Since it is usual for DVD movies to be released
at different times in different regions of the
world, all players have region codes and discs
can have an optional region code. If you load a
disc of a different region code to your player,
you will see the region code notice on the
screen. The disc will not playback, and should be
unloaded.
22
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic” and the
double-D symbol are trademarks of Dolby
Laboratories.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of this
copyright protection technology must be
authorised by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorised by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
The DVD VIDEO player is in
conformity with the EMC directive and
low-voltage directive.
Laser safety
This unit employs a laser. Due to possible eye
injury, only a qualified service per son should
remove the cover or attempt to service this
device.
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
LASER
Type Semiconductor laser GaAlAs
Wave length 650 nm (DVD)
780 nm (VCD/CD)
Output Power 7 mW (DVD)
10 mW (VCD/CD)
Beam divergence 60 degree
CAUTION
(WARNING LOCATION: ON THE
BACKPLATE OF SET)
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE POWER
SWITCHED ON.
For Customer Use:
Read carefully the information located at the
bottom of your DVD VIDEO player and enter
below the Serial No.Retain this information for
future reference.
Model No. DVD VIDEO
Serial No. __________________________
4
3141 016 19691
Contents
Introduction
Environmental Information ------------------------6
Supplied accessories --------------------------------6
Safety Information ----------------------------------- 6
Symbols Used in this Manual ----------------------6
Functional Overview
Front and Rear Panels ------------------------------7
Remote Control ------------------------------------- 8
Preparation
Basic Connections -----------------------------------9
Connecting to a TV----------------------------------9
Connecting to an Audio System ---------------- 10
Connecting to Optional Equipment ------------ 10
Inserting batteries into the Remote Control- 11
Using the Remote Control ---------------------- 11
Switching On --------------------------------------- 11
Operation
Basic Playback -------------------------------------- 12
General Features ---------------------------------- 12
Video Control during playback ----------------- 12
Audio Control during playback ----------------- 13
Repeat----------------------------------------------- 13
Repeat A-B ----------------------------------------- 13
5 disc Resume ------------------------------------- 13
OSD (On- Screen-Display) ---------------------- 13
Title Selection -------------------------------------- 13
Chapter Selection --------------------------------- 13
Time Search ---------------------------------------- 14
Zoom------------------------------------------------ 14
Special DVD features ----------------------------- 14
Playing a title/chapter ----------------------------- 14
Camera Angle-------------------------------------- 14
Changing the Audio Language ------------------ 14
Subtitles --------------------------------------------- 14
Special VCD & SVCD Features ------------------ 15
Playback Control (PBC)-------------------------- 15
Preview---------------------------------------------- 15
Setup Menu
Basic Operation------------------------------------ 17
General Setup -------------------------------------- 17
Disc Lock ------------------------------------------- 17
Program --------------------------------------------- 17
VFD Dim-------------------------------------------- 18
OSD Language------------------------------------- 18
Screen Saver --------------------------------------- 18
Speaker Setup -------------------------------------- 19
DOWNMIX---------------------------------------- 19
D.R.C.------------------------------------------------ 19
SPDIF Setup ---------------------------------------- 19
SPDIF OUT Setup -------------------------------- 19
LPCM 96K Mode---------------------------------- 20
Video Out Setup----------------------------------- 20
TV Display ------------------------------------------ 20
TV Type --------------------------------------------- 21
Smart Picture --------------------------------------- 21
Video Mode ---------------------------------------- 21
Personal Picture Setting -------------------------- 22
Preferences Setup --------------------------------- 22
Audio Language ----------------------------------- 22
Subtitle Language---------------------------------- 23
Disc Menu Language------------------------------ 23
Password-------------------------------------------- 23
Parental Control ----------------------------------- 24
Default ---------------------------------------------- 24
Smart Navigator ----------------------------------- 24
Specifications
Specifications --------------------------------------- 25
Maintenance
Maintenance ---------------------------------------- 25
Troubleshooting
Troubleshooting------------------------------------ 26
English
Picture CD & MP3 CD Playback
Function introduction----------------------------- 16
Basic playback -------------------------------------- 16
Auto playback -------------------------------------- 16
Selection playback --------------------------------- 16
Preview function ----------------------------------- 16
Playback with multi-angles ----------------------- 16
Playback Speed Control -------------------------- 16
Zoom picture -------------------------------------- 16
5
3141 016 19691
Introduction
English
Thank you for purchasing this Philips DVD player.
This Owner’s Manual explains the basic
operation of this DVD player.
Environmental Information
All unnecessary packaging has been omitted. We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet).
Your DVD player consists of materials which can
be recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Supplied accessories
– Remote control
– Batteries (two AA size) for remote control
– Audio cable
– SCART cable (not available for all versions)
– CVBS cable
– Owner’s Manual
Safety Information
● Before operating the DVD player, check that the
operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) is identical with the voltage of your
local power supply. If not, please consult your
dealer.
● Place the DVD player on a flat, hard and stable
surface.
● There must be sufficient room in front of the
player for the drawer to be opened.
● In cabinet, allow about 2.5cm (1 inch) of free
space all around the player for adequate
ventilation.
● Do not expose your player to extreme of
temperature or humidity.
● If the DVD player is brought directly from a cold
to a warm location, or is placed in a very damp
room, moisture may condense on the lens of the
disc unit inside the DVD player. Should this
occur, the DVD player would not operate
normally. Leave the power on for about one
hour with no disc in the DVD player until normal
playback is possible.
● The mechanical parts of the set contain selflubricating bearings and must not be oiled or
lubricated.
● When the DVD player is switched to
Standby mode, it is still consuming some
power. To disconnect the system from
the power supply completely, remove the
AC power plug from the wall socket.
Symbols Used in this Manual
The below symbols appear in some headings
and notes with the following meanings:
DVD
– Description refers to playback of DVD-video discs
VCD
– Description refers to playback of Video CDs
CD
– Description refers to playback of Audio CDs
Helpful Hints!
● Some DVD video discs require specific
functions or allow only limited functions
during playback.
● “ ” may appears on the TV screen
which means that the function is not
available on that specific DVD video disc.
6
3141 016 19691
Front and Rear Panels
Functional Overview
POWER ON/OFF
– switches the player to ON or OFF
Disc Tray
IR Sensor
– receive signals from remote control
COAXIAL (Digital audio out)
– connect to AUDIO inputs of a digital
(coaxial) audio equipment
AUDIO OUT (Left/Right)
– connect to AUDIO inputs of an
amplifier, receiver or stereo system
CVBS (VIDEO OUT)
– connect to CVBS Video inputs of a TV
2; PLAY/PAUSE
English
– to star t or interr upt playback
9 STOP
– to stop playback
/ OPEN/CLOSE
– to open/close the disc tray
MAINS (AC Power Cord)
– connect to a standard AC outlet
TV OUT (VIDEO OUT)
– connect to a TV with SC ART
CVBS
L
R
AUDIO
OUT
COAXIAL
TV OUT
MAINS
Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic
discharge may cause permanent damage to the unit.
3141 016 19691
7
Functional Overview
English
Remote Control
RETURN / TITLE
– go back to previous menu / to
display title menu during playback
DISC MENU
– access menu of a DVD disc / to
switch PBC on/off for VCD disc
– (left/right/up/down) select an
item in the menu
– acknowledge menu selection
– go to a previous chapter or
– stop playback
– start playback
– pause playback temporarily /
frame-by-frame playback
– repeat chapter, track, title, disc
REPEAT (A-B)
– repeat a specific segment
– display the content of a track or
– disable or enable sound output
1 2 3 4
OK
S
track
STOP ( 9 )
PLAY ( B )
PAUSE ( ; )
REPEAT
PREVIEW
whole disc
MUTE
POWER B
– switch DVD ON or go to
standby-on mode
0-9 numerical key pad
– select numbered items in a
menu
DISPLAY
– to display bit rate indicator
during playback (DVD, SVCD)
SYSTEM MENU
– access or remove player’s
system menu
T
– go to next chapter or track
SUBTITLE
– subtitle language selector
ANGLE
– select DVD camera angle
ZOOM
– enlarge video image
AUDIO
– audio language selector
8
3141 016 19691
Note:
– Press numerical key pad “1” for 2 seconds to
OPEN/CLOSE disc tray.
Preparation
Basic Connections
● Please refer to the instruction manuals of your
TV, VCR, Stereo System or other devices as
necessary to make the best connections.
● Make one of the following connections,
depending on the capabilities of your existing
equipment.
The following guidelines are options for the best
picture and sound quality available on your DVD
player.
Picture
1 Use the CVBS Video Ouput for good picture
quality.
2 Use SCART Output for best picture quality.
Sound
1 Digital audio connections provide the clearest
sound. Connect one of the DVD player’s
DIGITAL AUDIO OUT (COAXIAL) to your
amplifier or receiver.
2 If digital connections are not possible, connect
the DVD player’s Left and Right (white and red)
AUDIO OUT to your amplifier, receiver, stereo
or TV.
Warning!
– Never make or change connections
with the power switched on.
– Connect the DVD player directly to
your TV, instead of eg. a VCR, to avoid
distortion because DVD video discs are
copy protected.
– Do not connect the DVD player AUDIO
OUT to PHONO IN of your amplifier or
receiver.
Connecting to a TV
1 Connect the SCART (TV OUT) on the DVD
player to the corresponding connector on the
TV IN.
Note:
– Ensure that the “TV” indication on SCART
cable is connected to the TV set and “DVD”
indication on SCART cable is connected to the
DVD player.
If your TV is not equipped with a SCART input,
you can select the following connection:
If your TV has a CVBS Video input
connector,
1 Connect the CVBS VIDEO OUT on the DVD
player to the CVBS VIDEO IN.
2 Connect the Left and Right AUDIO OUT on the
DVD player to the Left and Right A UDIO IN on
the TV.
TO TV
OR
TO AUDIO IN TO VIDEO IN TO SCART IN
CVBS
L
R
AUDIO
OUT
COAXIAL
TV OUT
VCR
MAINS
English
3141 016 19691
9
Loading...