Philips DSR 300-00, DSR 310-00 User Manual

DSR 300/00 DSR 310/00
U B M P K
Safety instructions
02
English
All the safety and operating instructions should be read and understood before operating the receiver.
For best results:
- Position your receiver away from radiators or other heat sources.
- Leave a space of at least 3 cm around the receiver for ventilation, making sure that the ventilation holes are not obstructed.
- This receiver is intended for use in a domestic environment only and should never be operated or stored in excessively hot, humid or damp conditions.
- Make sure no objects or fluids enter the casing through the ventilation slots. Should this happen, disconnect your receiver from the mains and consult your retailer.
- For cleaning, use a damp chamois leather. Never use any abrasive cloth, sponge or cleaner.
- Always ensure the receiver is disconnected from the mains when connecting or disconnecting cables from the receiver.
- Do not disassemble the equipment.There are no user serviceable parts.
Mains connection
Before connecting the receiver to the mains,check that the mains supply voltage corresponds to the voltage printed on the rear of the receiver. If the mains voltage is different, consult your dealer.
If the receiver will not be used for a long time, unplug the mains cord from the wall socket.
Please wait before connecting your receiver - read on.
Meaning of symbols
The “Batteries marking symbol” means used batteries must not be disposed together with your household waste. Please, inquire about the local regulations regarding disposal of used batteries. For information: the Philips batteries supplied with your receiver remote do not contain hazardous substances such as Mercury, Cadmium, or Lead.
The “Material recyclability symbol” means the package cardboard or User manual paper is recyclable.
The “Material recyclability symbol” affixed on plastic parts means these parts are recyclable.
The “Green point” affixed on cardboard means PHILIPS pays a financial duty to the
voidance and Recovery of Packaging Waste” organization.
“A This receiver contains a large number of materials that can be recycled.If you are disposing of an old machine
The “Warning” symbol means the recommendations must be read carefully.
UCTIONS
2 SAFETY
INSTR
please tak
,
e it to a r
ecycling centr
.
e
Quick installation guide
AB
to AC outlet
LR
AUDIO
Digital
input
Analogue
input
Audio equipment
Satellite Receiver
TV set
VCR/DVD
Satellite Receiver
Cable or Off-air Antenna
IN FROM ANT
to AC outlet
OUT TO ANT
EXT 1 EXT 2
SCART
Satellite
Dish Antenna
Connecting to a TV and a VCR/DVD player using SCART Support
Note: for best DVD/VCR viewing, connect the DVD/VCR SCART EXT 1 directly to a SCART of the TV set.
Connecting to a Digital Amplifier/Home Theatre/HiFi set
English
QUICK
INST
TION GUIDE
ALLA
3
TABLE OF CONTENTS
English
Safety instructions 2 For best results 2 Mains connection 2 Meaning of symbols 2 Quick installation guide 3 Connecting to a TV and a VCR/DVD
player using SCART Support 3 Connecting to a Digital Amplifier/Home
Theatre/HiFi set 3
1 Introduction 6
2 Product description 7
2.1 Unpacking the product 7
2.2 Front panel 8
2.3 Rear panel 9
3 Remote control 10
4 Connecting your receiver 12
4.1 Connecting to a Satellite
Antenna and a TV 12
4.2 Connecting to a TV and a
VCR/DVD player using the SCART Support 13
4.3 Connecting to a Digital
e/HiFi
Amplifier/Home system 14
Theatr
5 First installation 15
5.1 Menu language and port selection 15
5.2 Channel scanning 16
5.3 Scanning failure 16
5.3.1 Antenna Setting 17
5.3.2 Signal test 17
6 General Viewing Function 18
6.1 Receiver wake up 18
6.2 Channel Information 18
6.3 Channel selection 18
6.3.1 Using <P+/P-> or numeric keys 18
6.3.2 Using the channel list 19
6.4 Channel list 19
6.5 TV or Radio Mode selection 19
6.6 Volume & Audio Control 19
6.6.1 Volume control and Mute 19
6.6.2 Audio Control 20
6.6.3 Audio language 20
6.6.4 Subtitles language 20
6.7 Recording timers 20
6.7.1 To set a timer from the guide 20
6.7.2 To set or modify a timer from the Timer menu 21
4 T
ABLE
CONTENTS
OF
6.7.3 To delete a running timer while watching digital TV or listening to digital radio 21
6.7.4 To delete a running timer set while the receiver was in standby 21
7 Menu 22
7.1 General information 22
7.1.1 Basics about menu navigation 22
7.1.2 Cancel/Store changes 22
7.2 Guide (Electronic Programme Guide) 22
7.3 Channel Manager 23
7.3.1 Channel Pool 24
7.3.1.1 To delete channels from
the Channel Pool 24
7.3.1.2 To move channels in the
Channel Pool 24
7.3.1.3 To lock channels 24
7.3.1.4 To sort channels in the
pool 25
7.3.2 Favourites 25
7.4 Parental Control 26
7.4.1
o enable Men
T
u Lock 26
7.4.2 To set the Parental Rate 26
7.4.3 To change your receiver's Pin Code 26
7.5 Timer Manager 26
7.5.1 Recording timer 27
7.5.2 Reminder 28
7.5.3 Sleep timer 28
7.6 Setup menu 28
7.6.1 Time Setting 28
7.6.2 System Setting 29
7.6.3 Remote Control setting 29
7.7 Installation 31
7.7.1 Antenna Setting 31
7.7.2 Add Service 32
7.7.3 Signal Test 32
7.7.4 Product Identifier 33
7.7.5 Factory Default 33
7.7.6 Software update 33
8 Menu Tree 34
9 Troubleshooting 36
10 Technical specifications 38
English
ABLE
T
CONTENTS
OF
5
1 Introduction
English
Thank you for buying this product from Philips and congratulations! The Philips Digital Satellite Receiver allows you to view a wide variety of free-to-air satellite channels with the best digital picture and sound quality.
With this product you can enjoy advanced functions and features including:
- Digital picture and sound quality
- Wide screen format
- TV SCART and VCR/DVD SCART connector
- Up to 4,000 presets for TV and Radio channels
- Easy installation and use through the well-tested Euphoria User Interface
- Fast zapp
- Personal channel list and favourite lists
- Electronic Programme Guide with information about current and next programmes
This User Manual covers the installation of your receiver and the necessary steps to use the various functions, so you can obtain the best from standard as well as unique features.
Lucas Covers Paris, February 2004
6
INTR
ODUCTION
2 Product description
2.1 Unpacking the product
Unpack the receiver and check to make sure that all of the following items are included in the package:
1 x Remote Control Unit
-
1 x User Manual
-
- 2 x AA batteries
1 x SCART Cable
-
1 x Power Cord.
-
1 x Warranty booklet
-
Plastic bags can be dangerous. Keep the bag away from babies and children to prevent suffocation.
The symbol on the packaging and User Manual means that the materials are recyclable.
English
ODUCT
PR
DESCRIPTION
7
2.2 Front panel
English
Q W E R
1 STANDBY button: . . . . . . . . . . . . . . . . . . . . . . . . Switch the receiver OFF.
2 Red LED indicator: . . . . . . . . . . . . . . . . . . . . . . . . Display receiver status (see status indicator table).
3 Green LED indicator: . . . . . . . . . . . . . . . . . . . . . Display receiver status (see status indicator table).
4 Remote control receiver window.
Status indicator table
LED Left-hand LED Right-hand LED
Mode (Red) (Green/Orange)
Receiver connected to the mains or in Standby mode ON OFF
atching TV or listening to the Radio OFF ON
W
essing a remote control key Fast blinking Depending on
Pr
ent mode
r
cur
Timer active ON ON
Timer activ
Software download Depending on Fast blinking
8 PR
e in Standby Slow blinking OFF
current mode
ODUCT
DESCRIPTION
2.3 Rear panel
WI
Q E R U
1 LNB IN (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connect the coaxial cable from the satellite dish antenna.
Refer to chapter 5 for recommended connection diagrams.
2 RF OUT (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . RF output used to connect your receiver to a VCR/TV set to
watch analogue channels only, or to connect another receiver.
3 VCR (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCART (1) socket to connect your video recorder or DVD
player/recorder
4 SERIAL (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RS232 socket for serial data transfer to a PC or another
receiver
5 TV (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SCART (1) socket to connect to your TV set or a video
projector
6 L/R AUDIO OUT (*): . . . . . . . . . . . . . . . . . Left/Right outputs to connect your HIFI/Audio receiver
system
7 DIGITAL OPTICAL OUT (*): . . . . . . . Digital output to connect your HIFI/Audio receiver system
8 230V~50Hz 20W max (**): . . . . . . . . . . Socket to connect the power cord
T
Y
English
Note: the label showing the type and serial number is underneath the receiver.
(
1) SCART is also called Euroconnector or Peritel.
* Safety Extra Low Voltage ** Hazardous Voltage
PR
ODUCT
DESCRIPTION
9
3 Remote control
English
Mute
- Audio mute
RED,GREEN,YELLOW,
BLUE
FAV
- Toggle between favourite lists
SUBTITLE
- Temporarily starts/stops or change Audio Subtitling
I-II
- Temporary update of audio language and selection of audio mode
MENU
- Open/Close menu (in digital TV mode)
CURSOR keys
- The t and y cursor keys are used to move within the menus and lists
u and i cursor keys
- The are used to select a value in a menu item
OK
- Select / call up channel lists / zap
VOLUME +/ -
- Volume up / down.
Standby
- Standby
V
(blue) resp.V (white)
Scrolls one Page Up or one Page Down in guide or favourite lists
TEXT is not active
GUIDE
- Open Now & Next Guide
INFO
- Open info banner
- Show extended programme information
- Close banner
TIMER
- Set a recording timer when watching Digital TV or from the GUIDE feature.
“TIMER, 0” sequence
The keystroke deletes the current running timer
BACK
- Select the previously watched digital TV channel
- In menu mode:
Either exit the menu or bring selection back one level and cancel the changes you made.
P+ / P-
- Select next / previous channel
TV / RADIO
- Toggle between TV / Radio mode
TV / STB
- Toggle between Digital and Analogue
10 REMO
TV/VCR/DVD.
CONTR
TE
OL
0-9
-
Channel selection in digital TV mode
Do not dispose of the batteries with
your household waste.
The Philips batteries supplied with your receiver’s remote do not contain heavy metals such as Mercury or Lead Cadmium. Nevertheless, in many countries, exhausted batteries cannot be disposed of with your household waste.
Please enquire about the local regulations concerning the disposal of used batteries.
English
REMO
TE
CONTR
OL
11
4 Connecting your receiver
English
There are several ways you can connect and incorporate your digital receiver into your existing audio/video equipment set-up.
Warning!
Before starting to connect:
- Unplug all equipment (TV set as well as the VCR and/or DVD if required) from the mains.
- Do not connect your digital receiver to mains supply now.
- Check your current wiring: you may not need to modify your existing Audio/Video set-up connections if they already match the connection diagrams below.
- Depending on your existing set up, choose the most suitable connection method for incorporating your digital receiver into your existing Audio/Video set-up.Please read chapters 4.
Note: for the installation of outdoor equipment such as the dish antenna, refer to the manuals supplied with the equipment.When adding new equipment, be sure to refer to the related installation instructions of the manual.
4.1 Connecting to a Satellite Antenna and a TV
1 and 4.2
12 CONNECTING
OUR
Y
RECEIVER
Loading...
+ 26 hidden pages