Welcome
Quick start guide
1
2
3
Connect
Install
Enjoy
philips
What’s in the box
Handset
DECT 122
Rechargeable
batteries
In multipack sets you will find additional handsets, chargers power supplies,
line cords and batteries.
Base station
DECT 122
Quick start guide User manual
Always use the cables and
batteries that came with your
phone.
Power supply
Line cord
unit
Guarantee
1
A
2
A
Connect
Connect the base station
OR
Install
Always use rechargeable batteries.
Insert batteries
! Insert the plug of the power
cord into the socket on the
bottom of the base station.
! Insert the plug of the line
cord into the socket on the
bottom of the base station.
! Plug the power supply unit
into your power outlet.
! Plug the line cord into the
line socket.
Charge handset for 24 hours
B
To set the date and time
1. Press .
2. Press Down to reach CLOCK/ALARM.
3. Press to display DATE/TIME.
4. Press and enter the current date.
5. Press and enter the current time.
6. Press to confirm the settings.
3
Enjoy
To make a call
Press and dial the number.
TIP :You can predial the number
before seizing the line.
To adjust earpiece volume while on line
Press Up or Down to increase or decrease the volume.
To set the handset ring melody
1. Press and press Down to reach PERSONAL SET.
2. Press to select HANDSET TONE.
3. Press and press Down to reach RING MELODY.
4. Press , the melody is played.
5. Press Up or Down to browse the list of melodies.
To answer a call
Press .
6. Press to confirm your choice.
To save a name & number in the phonebook
1. Press and press Down to reach PHONEBOOK.
2. Press to select ADD NUM.
3. Press and enter the name.
4. Press to save the name.
5. Enter the number and press to save the number.
3111 285 25771
To set or change the alarm clock settings
1. Press and press Down to reach CLOCK/ALARM.
2. Press and press Down to reach SET ALARM.
3. Press
, scroll to select OFF or ON ONCE or
ON DAILY.
4. Press to confirm.
If you select ON ONCE or ON DAILY :
Enter the time and press to confirm.
TIP :When the alarm rings,
press any key to stop the alarm.
To rename a handset
1. Press and press Down to reach PERSONAL SET.
2. Press and press Down to reach HANDSET NAME.
3. Press and enter the name (text entry, see manual page 10).
4. Press to confirm.
Troubleshooting
For expended overview see user manual page 25.
Problem
! No dialling tone.
! Poor audio quality.
! No symbol on the display.
! No Caller ID, poor connection
quality with broadband DSL
Internet.
Tip
! Check the connections.
! Use the line cord provided in
the box.
! Try to place the base station at
least one metre away from any
electrical appliances.
! Make sure the product is plugged.
! Recharge the batteries.
! Check you have one DSL filter
plugged directly on each line
socket used in the house.
! Check the modem and the phone
are plugged in correct filter slot
(one specific for each).
! Filters can be defective, replace
it and make another test.
Need help ?
User manual
See the user manual that came with your DECT 122.
Online help
www.p4c.philips.com
Loading...