Philips CD440, CD445 Quick Start Guide
Set the earpiece volume
During a call:
Press / to select the eapiece volume from level one to level five
Troubleshooting
For more information, see the user manual that came with your CD440 or
CD445.
Set the ring melody
1. Press to access the main menu
2. Press / to select
3. Press to select HANDSET TONE
4. Press and / to select RING MELODY
5. Press and / to scroll to your desired ring melody
6. Press to save the settings
Store a number in the phonebook
1. Press to access the main menu
2. Press / to select
3. Press and / to scroll to NEW ENTRY
4. Press to enter the name (maximum 12 characters)
5. Press to enter the number (maximum 24 digits)
6. Press to choose a group (
<Group C>)
7. Press to save the entry
Access the phonebook
1. Press to access the phonebook
2. Press / to select your desired phonebook entry
3. Press to view the details of your selected phonebook entry
PERSONAL SET
PHONEBOOK
<No Group>, <Group A>, <Group B>,
Problem Solution
No dialing tone • Charge the batteries for at least 24 hours
• Move closer to the base station
• Use the line cable provided
Poor audio quality • Move closer to the base station
• Move the base station at least one metre
away from any electrical appliances
The is blinking • Register the handset to the base station
• Move closer to the base station
The handset LCD displays
nothing
Caller Line Identification
(CLI) service does not work
• Try again by disconnecting and connecting the
base station power supply and follow the
procedure to register a handset
• Make sure the two supplied rechargeable
batteries have been inserted into the battery
compartment
• Make sure the supplied batteries are charged
up
• Check your subscription with your network
operator
Need help?
Welcome
Quick start guide
Connect
1
Install
2
Enjoy
3
Listen to new messages recorded on answering machine (applicable to
CD445 only)
1. Press on the base station to turn on the answering machine
2. Press on the base station, playback of the oldest new message will begin.
3. Press to skip the current message and play the next message
4. Press to go back to previous message if it is pressed within one second of
current message playback
5. Press to replay current message if it is pressed after one second of current
message playback
6. Press to increase or to decrease speaker volume during message
playback
Press
7.
See CD445 user manual for details about the answering machine function.
to delete the current message
User Manual
See the User Manual that came with your CD440 or CD445.
Online help
www.philips.com/support
What’s in the box
1.1.1.1 C
Welcome
Conn
ect
Ins
tal
l
Enjo
y
1
2
3
Quick sta
r
t gu
ide
CD440 Base station
OR
1
Connect
Connect the base station
1. Insert the plug of the power cord into the socket under the base station.
2. Insert the plug of the line cord into the socket under the base station.
3. Connect the other end of the line cord together with the line adaptor if
necessary, to the telephone line socket and the other end of the power cable to
the electricity socket.
Connect the
line cord to the
Connect the
power supply
1
line socket
3
2
Set the time
1. Press to access the main menu
2. Press / to select
3. Press to select SET CLOCK
4. Press and enter the current date (DD/MM/YY)
5. Press and enter the current time (HH:MM) in 24 hour format
6. Press to save the settings
CLOCK & ALARM
Enjoy
3
CD440/CD445 Handset
Line cord
CD445
CD440 or CD445
User manual
The line adaptor may not be attached to the line cord. You may find the line
adaptor in the box. In this case, you have to connect the line adaptor to the line
cord first before plugging the line cord to the line socket.
In multi-handset packs, you will find one or more additional handsets, chargers with
power supply units and additional rechargeable batteries.
Warning Always use the cables and batteries that are supplied with your
phone.
CD445 Base Station
2 x AAA Rechargeable
batteries
Guarantee
Power supply unit for
base station
Quick start guide
(Country dependent)
Belt clip
2
Install
Insert rechargeable batteries and charge
Insert batteries Charge handset for 24 hours
Configure your phone (if necessary)
After charging your phone for a few minutes, the Welcome screen appears.
1. Press to display the list of countries
2. Press / to scroll to your country
Press to confirm your selection
3.
Set the alarm
1. Press to access the main menu
2. Press / to select
3. Press and / to select ALARM
4. Press and / to select OFF, ON ONCE, or ON DAILY
5. Press to save the settings
CLOCK & ALARM
Rename your handset
1. Press to access the main menu
2. Press / to select
3. Press and / to select HANDSET NAME
4. Press to enter the handset name
5. Press to save the settings
PERSONAL SET
Make a call
Press and dial the number
OR
Dial the number and press or
Answer a call
When the phone rings, press or .
End a call
Press
3111 285 34281
Loading...