Philips CD1552B-37 User Manual

Call from the phonebook

1. Press d in idle mode.

2. Scroll

: to a phonebook entry.

3. Press

The call is initiated.

Listen to messages recorded on the answering machine (for CD155 only)

Press o on the base station to turn on the answering machine (the LED is turned on).

o again to turn off the answering machine (the LED is turned off).

Press

p on the base station to play phone messages (the first recorded message

Press

will be played first).

Press

s to skip the current message and play the next message. R to go back to the previous message (if pressed within 1 second of current

Press

message playback).

Press

R to replay current message (if pressed after 1 second of current message

playback).

Press

-+ to adjust speaker volume during message playback. f to delete the current message.

Press

Refer to your CD155 User Manual for details about the answering machine function.

Troubleshooting

For more information, please refer to the User Manual that came with your phone.

Problem Solution

• There’s no dialling tone! • Check the connections

• Caller cannot hear me clearly!

SEARCHING... is

• displayed on handset and

icon is blinking!

• Calller number is not displayed!

• Charge the batteries

• Use the line cable provided

• Move closer to the base station

• Move the base station at least one metre away from any electrical appliances

• Move closer to the base station

• Reset your unit and restart the handset registration

• Check your subscription with your network operator

Welcome to Philips!

Need help?

User Manual

Refer to the User Manual that came with your CD150/155.

Online help

www.philips.com/support

Document number: 3111 285 42441 (US-EN) Printed in China

Quick start guide

Connect

Install

Enjoy

What’s in the box

Base station with

bracket for CD150

Handset

Battery door

Belt clip

Connect

Connect the base station

Place the base station in a central location near the telephone line socket and electricity socket.

Enjoy

Make a call

Dial the number (maximum 24 digits) and press r key.

OR Press

r or v key to take the line and dial the number (maximum 24 digits).

Answer a call

When the phone rings, press r key.

End a call

To end a conversation, press e key.

CD155

NiMH batteries

*You may find in the box the line adaptor delivered separately from the line cable. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.

In multihandset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries.

WARNING Always use the cables and batteries that came with your phone.

Power supply2 AAA rechargeable

GuaranteeUser manual

Line cord*

Quick Start Guide

2. Connect the line cord and the power cable to their corresponding connectors at the back of the base station.

3. Connect the other end of the line cord and power cable to their respective sockets.

Install

Insert rechargeable batteries and charge

Insert batteries Charge handset for 24 hours

Adjust earpiece volume

During a call, press : to select from VOLUME 1, VOLUME 2 or VOLUME 3,

Set the ring melody

1. Press m key in idle mode, scroll : to PERSONAL SET and press <OK,

scroll

: to HANDSET TONES and press <OK, scroll : to RING

TONES and press <OK.

2. Scroll

: to your desired melody to play the melody.

3. Press

<OK to set the ring melody.

A validation tone is emitted and the screen returns to previous menu.

Store a contact in the phonebook

1. Press m key in idle mode, scroll : to PHONEBOOK and press <OK, press

<OK to enter NEW ENTRY.

ENTER NAME is displayed on the screen.

3. Enter the name of the contact (maximum 12 characters) and press

4. Enter the number (maximum 24 digits) and press

A validation tone is emitted.

Access the phonebook

1. Press d in idle mode and scroll : to browse the phonebook.

2. To view the details, press

<OK.