■ Disconnect from the electric outlet before cleaning. Do not use
liquid or aerosol cleaners. Clean only with a slightly damp cloth.
■ Do not block any of the ventilation openings. Install in accordance
with the manufacturers instructions.
■ Do not install in direct sunlight, near any heat sources such as
radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
■ Do not defeat the safety purpose of the polarized or grounding type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or third prong are provided for your safety. When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
■ Do not remove cover, to prevent electric shock. Refer servicing to
qualified service personel only.
■ Unauthorized modification of this equipment or usage of an
unshielded connecting cable may cause excessive interference.
■ Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls can result in
damage which often requires extensive work by a qualified technician
to restore the unit to normal operation.
■ Use in well-ventilated area and do not block any of the ventilation
openings. Install in accordance with the manufacturer’s instructions.
■ The unit must be operated from the type of power source indicated
on the label. If the type of available power is unknown, consult your
dealer or local power company.
■ Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your
electrician. Do not alter the plug; this will defeat the safety feature.
■ Do not overload wall outlets and extension cords as this can result
in a risk of fire or electric shock.
■ If the picture displayed looks abnormal, turn off the unit and
disconnect it from the electric outlet. Verify your signal wire
connections and reconnect the display to the electric outlet.
■ Only use attachments/accessories specified by the manufacturer.
Downloaded From TV-Manual.com Manuals
3
User Manual BDS4241V/BDH4241V/BDH5021V
■ Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
■ Unplug this apparatus during lightning storms or when unused for
long periods of time.
■ Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
■ This product may contain mercury. Disposal of this material may be
regulated due to environmental considerations.
For disposal or recycling information, please contact your local
authorities or the Electronic Industries Alliance: www.eiae.org
■ Damage Requiring Service:
The appliance should be serviced by qualified service personnel
when:
● The power supply cord or the plug has been damaged or frayed.
● Objects have fallen, or liquid has been spilled into the appliance.
● The appliance has been exposed to rain.
● The appliance does not appear to operate normally or exhibits a
marked change in perfomance.
● The appliance has been dropped, or the enclosure damaged.
● Unit does not operate normally when the operating instructions
are followed.
■ Tilt/Stability:
● All displays must comply with recommended international global
safety standards for tilt and stability properties of its cabinet
design.
● Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet which could
ultimately overturn the product.
● Do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the set and cause product damage
and/or personal injury.
● Do not place the unit on an unstable cart, stand or table. Or the
product may fall, causing serious damage.
■ Do not place the unit on a bed, soffa, rug, or similar surfaces.
■ Wall or Ceiling Mounting:
The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
■ Power Lines:
An outdoor antenna should be located away from power lines.
■ Object and Liquid Entry:
Care should be taken so that objects do not fall and liquids are not
spilled into the enclosure through openings.
Downloaded From TV-Manual.com Manuals
4
User Manual BDS4241V/BDH4241V/BDH5021V
■ Battery Usage:
CAUTION: To prevent battery leakage that may result in bodily
injury, property damage, or damage to the unit.
● Install all batteries correctly, with + and - aligned as marked on
the unit.
● Do not mix batteries (old and new or carbon and alkaline, etc.).
● Remove batteries when the unit is not used for a long time.
1.2WARNINGS AND PRECAUTIONS
1.2.1NOTE TO THE CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground must be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
KNOW THESE SAFETY SYMBOLS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONEL. a
■ This lightning flash with arrow-head within a triangle indicates
uninsulated material within your unit, which can cause an electric
shock. For the safety of everyone in your household, do not remove
product cover.
■ For the safety of everyone in your household, do not remove
product cover. The exclamation point within a triangle calls
attention to features for which you mustread the enclosed literature
closely to prevent operating and maintenance problems.
Downloaded From TV-Manual.com Manuals
5
User Manual BDS4241V/BDH4241V/BDH5021V
WARNING
To reduce the risk of fire or electric shock, this appliance must not be
exposed to rain or moisture, and objects filled with liquids, such as
vases, must not be placed upon this apparatus.
CAUTION
To prevent electric shock, match wide plug blade to wide slot, and fully
insert.
ATTENTION
Pour éviter les chocs électriques, introduire la lame la plus large de la
fiche dans la bome correspondante de la prise et pousser jusqu’au fond.
1.3CLEANING & CARE
■ To avoid possible shock hazard, please be sure that the television is
unplugged from the electrical outlet before cleaning.
■ When cleaning the television screen, take care not to scratch or
damage the screen surface (avoid wearing jewelry or using anything
abrasive).
■ Wipe the front of the screen with a clean cloth dampened with
water. Use even, easy, vertical strokes when cleaning.
■ Gently wipe the cabinet surfaces with a clean cloth or sponge
dampened in a solution of cool clear water. Use a clean dry cloth to
dry the wiped surfaces.
■ Occasionally vacuum the ventilation holes or slots in the cabinet
back.
■ Never use thinners, insecticide sprays, or other chemicals on or near
the cabinet, as they might cause permanent marring of the cabinet
finish.
■ Do not allow a still image to be displayed for an extended period of
time as this can cause a permanent after-image to remain.
Downloaded From TV-Manual.com Manuals
1.4END-OF-LIFE DISPOSAL
■ This Philips product and its packaging contain materials that can be
recycled and re-used. Specialized companies can recycle your
product to increase the amount of reusable materials and minimize
the amounts which need to be properly disposed.
■ This product might also use batteries, which should not be thrown
away when depleted, but should be handed in and disposed of as
small chemical waste.
■ Please find out about the local regulations regarding the disposal of
the television, batteries, and packaging materials whenever you
replace existing equipment.
6
2. UNPACKING AND INSTALLATION
2.1UNPACKING
■ The monitor is packed in a carton, together with the standard
accessories. Any other optional accessories will be packed
separately.
■ The weight of the monitor differs - depending on the type - from 29
to 43 kg. Due to the size and weight it is recommended to move it
by 2 people.
■ The protective glass and the glass substrate are installed on the front
of the product. Since both glass can be broken and scraped easily the
product has to be handled with care. Never place the monitor with
the glass faced down unless it is protected with pads.
■ After opening the carton ensure that the content is in good
condition and complete.
2.2PACKAGE CONTENTS
Please verify that you received the following items with your package
content:
1Monitor
2 Remote Control with batteries
3User Manual on CD-ROM
4 Power Cables (UK, Continent)
5VGA, DVI cable
6 Table stand (feet)
User Manual BDS4241V/BDH4241V/BDH5021V
Downloaded From TV-Manual.com Manuals
User Manual
7
Remote Control/
AAA Batteries
Power Cord
User Manual BDS4241V/BDH4241V/BDH5021V
2.3INSTALLATION NOTES
■ Due to the high power consumption, always use the plug exclusively
designed for this product. If an extended line is required, please
consult your service agent.
■ The product should be installed on a flat surface to avoid tipping.The
distance between the back of the product and the wall should be
maintained for proper ventilation. Avoid installing the product in the
kitchen, bathroom or any other places with high humidity so as not
to shorten the service life of the electronic components.
■ Please ensure the product is installed horizontally. Any 90 degrees
clockwise or counter-clockwise installation may induce poor
ventilation and subsequent component damage.
■ To protect the screen and avoid screen damage, do not display a still
picture for a long time.
■ The PDP can normally operate only under 2000m in height. It might
abnormally function at a place over 2000m in height and do not
install and operate there.
Downloaded From TV-Manual.com Manuals
8
3. PARTS AND FUNCTIONS
User Manual BDS4241V/BDH4241V/BDH5021V
11111211311411511611
7
3.1FRONT VIEW
1. Input Button
Use this button to switch between available inputs.
2. Menu Button
Use this button to engage the On Screen Display menu.
3. Volume Adjustment Buttons
Use these buttons to adjust volume up and down. These keys also
serve as navigation and adjustment keys when On Screen Display
menu is engaged.
4. Select Buttons
Use these buttons to navigate through the the On Screen Display
menu. If an optional TV tuner is installed, these buttons also function
as Channel Up/Down.
5. Power (Standby) Button
Turns power on/off from standby mode. There is a wait period
between on/off cycles.
6. Status LED
● Not Illumated = No AC Power detected
If the main power switch (rear of panel) is turned off, this LED
will not illuminate.
● Red = Standby (Power OFF) with AC power detected
The LED will illuminate in red color if the monitor is shut off but
the main power cord is plugged into the back of the unit.
● Solid Green = Power ON
Downloaded From TV-Manual.com Manuals
7. Remote Control Signal Receiver
Point the remote control towards this spot on the PDP.
9
11111
User Manual BDS4241V/BDH4241V/BDH5021V
3.2REAR VIEW
11
7
2
11
3
11
4
11
5
11611
8
11
9
11
10
11
1
1. External speaker output
Connect to external speakers.
2. RS-232 Connector
Connect to a PC to update software.
3. Digital DVI input
Connect to digital video signals from a Set-Top box or Computer
Audio Output.
4. RGB(VGA) input
Connect to RGB (VGA) output of Computer or Set-Top box.
5. Component Video inputs
Auto-detecting component video inputs (Y/Pb/Pr or Y/Cb/Cr) for
connecting to the component output jacks of a DVD player or
Set-Top Box.
6. S-Video input
Connect S-Video signals from external sources such as VCRs or
DVD players.
7. Monitor output
Connect to the video and audio input of a recording VCR or DVD.
Connect to the audio input of an audio system.
8. Video input
Connect to the video and audio output of an external device.
9. SCART (AV) Connector
Connect to external sources such as VCRs or DVD players.
10. Power connection
Connect the supplied power cord to the wall outlet.
Downloaded From TV-Manual.com Manuals
10
11
11
11
11
11
12
11
U ser M anual BD S 4241V /B D H 4241V /BD H 5021V
3.3 REMOTE CONTROL
3.3.1 GENERAL FUNCTIONS
1. Sound Mute On/Off
11
1
3
4
6
8
2
2. Standby Power On/Off
Push this button to switch on the monitor from Standby mode. Push
it again to turn it off to Standby mode.
3. Menu
Activates the OSD (On Screen Display) menu
11
5
4. Volume +/-
Turns volume up or down.
5. Channel Up/Down
Changes the TV channels sequentially.
11
7
6. TEXT
Activates the TELETEXT mode.
7. INPUT
Displays the available input sources.
8. FREEZE
Freeze the display on the screen. The playback system will continue
playing.
11
11
10
9
9. Number keypad
Use number keypad to select the TV channel you want to watch
10. RECALL
Display information.
11
11
11. SLEEP
Press this button to set timer off.
12. AUTO
Auto adjustment with RGB and DVI
Downloaded From TV-Manual.com Manuals
11
User Manual BDS4241V/BDH4241V/BDH5021V
3.3.2TELETEXT FUNCTION BUTTONS
1. TEXT
11
1
11
3
11
4
11
7
11
2
11
5
11
6
11
8
11
9
Activates the TELETEXT mode.
2. INPUT
Displays the TELETEXT index.
3. Fasttext
With fasttext, you can easily access the topic and relevant pages you
want by pressing the red, green, yellow and blue buttons on the
remote control.
In TELETEXT mode, volume controls remain available, but the
relevant symbols are not shown on the screen.
4. Page Up (AUTO)
Dispays the next TELETEXT page.
5. Zoom (I.SIZE)
Press the I.SIZE key once to zoom in on the top part of the screen.
Press twice to zoom in on the bottom part of the screen and three
times to return to normal display.
6. Page Down (MTS)
Displays the previous TELETEXT page.
7. FREEZE
Freezes the current page, preventing update and subpage display.
● Press the HOLD/POSITION key on the remote control to select
this function.
● Press the HOLD/POSITION key again to cancel.
8. Reveal
Reveals hidden page information. Press the Reveal button to show
the information again.
9. Sub-page
Press to display a secondary page by entering its number.
3.3.3INSERTING THE BATTERIES IN THE REMOTE
CONTROL
1 Remove the cover on the rear of the remote control.
2 Insert two AAA size 1.5V batteries ensuring that the "+" and "-" ends
of the batteries are correctly aligned.
3 Replace the cover.
Note:
Do not mix battery types, e.g. alkaline and managnese.
Downloaded From TV-Manual.com Manuals
12
Loading...
+ 30 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.