Philips AZ1330 User Manual

AZ1330D

Docking Entertainment System

Thank you for choosing Philips.

Need help fast?

Read your Quick Start Guide and/or

User Manual first for quick tips

that make using your Philips product

more enjoyable.

If you have read your instructions

and still need assistance,

you may access our online help at

www.philips.com/support

Philips vous remercie de

votre confiance.

Besoin d'une aide

rapide?

Les Guide d'utilisation rapide et Manuel de
l'utilisateur regorgent d'astuces destinées à

simplifier l'utilisation de votre produit Philips.

Toutefois, si vous ne parvenez pas à résoudre

votre probléme, vous pouvez accéder à

notre aide en ligne à l'adresse

www.philips.com/support

Gracias por escoger Philips

Necesita ayuda

inmediata?

Lea primero la Guía de uso rápido o el

Manual del usuario, en donde encontrará

consejos que le ayudarán a disfrutar

plenamente de su producto Philips.

Si después de leerlo aún necesita ayuda,

consulte nuestro servicio de

asistencia en línea en

www.philips.com/support

Return your Product Registration Card today

to get the very most from your purchase.

Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so
don't miss out. Complete and return your Product Registration Card at once to ensure:

*Proof of
Purchase

Returning the enclosed card

guarantees that your date of

purchase will be on file, so no

additional paperwork will be

required from you to obtain

warranty service.

*Product Safety
Notification

By registering your product, you'll

receive notification - directly from

the manufacturer - in the rare

case of a product recall or safety

defect.

*Additional
Benefits of
Product
Ownership

Registering your product

guarantees that you'll receive

all of the privileges to which

you're entitled, including special

money-saving offers.

Know these

safetysymbols

This “bolt of lightning” indicates
uninsulated material within your

unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove
product covering.

The “exclamation point” calls
attention to features for which

you should read the enclosed
literature closely to prevent operating
and maintenance problems.

CAUTION

For Customer Use

Enter below the Serial No. which is
located on the bottom of the cabinet.
Retain this information for future
reference.

Model No. ______________________

Serial No.

______________________

WARNING: To reduce the risk of fire
or electric shock, this apparatus should
not be exposed to rain or moisture, and
objects filled with liquids, such as vases,
should not be placed on this apparatus.

CAUTION: To prevent electric shock,
match wide blade of plug to wide slot,
fully insert.

RISK OF ELECTRIC SHOCK

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

DO NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

Clean only with dry cloth.

Where the MAINS plug or an appliance
coupler is used as the disconnet device,
the disconnet device shall remain
readily operable.

materials

9

Class II equipment symbol

This symbol indicates that the unit has

a double insulation system

Philips, P.O. Box 671539, Marietta, GA. 30006-0026

PHILIPS LIMITED WARRANTY

ONE (1) YEAR

WARRANTY COVERAGE:

PHILIPS warranty obligation is limited to the terms set forth
below.

WHO IS COVERED:

Philips warrants the product to the original purchaser or the
person receiving the product as a gift against defects in materi­als and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.

WHAT IS COVERED:

The Philips warranty covers new products if a defect arises and
a valid claim is received by Philips within the Warranty Period.
At its option, Philips will either (1) repair the product at no
charge, using new or refurbished replacement parts, or (2)
exchange the product with a product that is new or which has
been manufactured from new, or serviceable used parts and is
at least functionally equivalent or most comparable to the origi­nal product in Philips current inventory, or (3) refund the origi­nal purchase price of the product.
Philips warrants replacement products or parts provided under
this warranty against defects in materials and workmanship
from the date of the replacement or repair for ninety (90) days
or for the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product
or part is exchanged, any replacement item becomes your
property and the replaced item becomes Philips’ property.
When a refund is given, your product becomes Philips’ proper­ty.

Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.

Replacement product can only be sent if all warranty
requirements are met. Failure to follow all require­ments can result in delay.

WHAT IS NOT COVERED - EXCLUSIONS AND LIM­ITATIONS:

This Limited Warranty applies only to the new products manu­factured by or for Philips that can be identified by the trade­mark, trade name, or logo affixed to it. This Limited Warranty
does not apply to any non-Philips hardware product or any
software, even if packaged or sold with the product. Non­Philips manufacturers, suppliers, or publishers may provide a
separate warranty for their own products packaged with the
bundled product.

Philips is not liable for any damage to or loss of any programs,
data, or other information stored on any media contained with­in the product, or any non-Philips product or part not covered
by this warranty. Recovery or reinstallation of programs, data
or other information is not covered under this Limited
Warranty.

This warranty does not apply (a) to damage caused by accident,
abuse, misuse, misapplication, or non-Philips product, (b) to
damage caused by service performed by anyone other than
Philips or Philips Authorized Service Location, (c) to a product
or a part that has been modified without the written permis­sion of Philips, or (d) if any Philips serial number has been
removed or defaced, or (e) product, accessories or consum­ables sold “AS IS” without warranty of any kind by including
refurbished Philips product sold “AS IS” by some retailers.

This Limited Warranty does not cover:

• Shipping charges to return defective product to Philips.

• Labor charges for installation or setup of the product, adjust­ment of customer controls on the product, and installation
or repair of antenna systems outside of the product.

• Product repair and/or part replacement because of improper
installation, connections to improper voltage supply, abuse,
neglect, misuse, accident, unauthorized repair or other cause
not within the control of Philips.

• Damage or claims for products not being available for use, or
for lost data or lost software.

• Damage occurring to product during shipping.

• A product that requires modification or adaptation to enable
it to operate in any country other than the country for
which it was designed, manufactured, approved and/or
authorized, or repair of products damaged by these modifica­tions.

• A product used for commercial or institutional purposes
(including but not limited to rental purposes).

• Product lost in shipment and no signature verification receipt
can be provided.

• Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO
RICO, OR U.S. VIRGIN ISLANDS…

Contact Philips Customer Care Center at:

1-888-PHILIPS (1-888-744-5477)

TO OBTAIN ASSISTANCE IN CANADA…

1-800-661-6162 (French Speaking)
1-888-PHILIPS (1-888-744-5477) - (English or Spanish
Speaking)

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON­SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN­TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD­UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICA­BLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILI­TY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS
PRODUCT IS LIMITED IN DURATION TO THE DURATION
OF THIS WARRANTY.

Some states do not allow the exclusions or limitation of inci­dental or consequential damages, or allow limitations on how
long an implied warranty lasts, so the above limitations or
exclusions may not apply to you.

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

3121 233 48801

AUX

VOLUME

DBB

P

R

O

G

M

O

D

E

P

O

W

E

R

S
O

U

R

C

E

A

L

B

U

M

/

P

R

E

S

E

T

-

A

L

B

U

M

/

P

R

E

S

E

T

+

DOCK

DOCK FOR

DOCKING ENTERTAINMENT SYSTEM AZ1330D

for

MP3-WMA PLAYBACK

iR

$

#

2

@

0
9

%

^

!

3
4

7

5
6

1

6 x R20 • UM-1 • D-CELLS

8

& (

)
™

7

≤

@

¡

8
6

4

∞

*

£

1

X

2

3

1

2

8

3

6

7

4

5

9

English Controls / Power Supply

Supplied accessories

– AC power cord

– Remote control

– AUX-in cable

– Docking kit

• 1 x Apple iPod dock (pre-installed with the
main set)

• dock adaptors (8 adaptors for different iPod
types)

• 1 dust cover (keep the dock connector from
covering dust and dirt)

Top and front panels (See 1)

1 Telescopic antenna – improves FM

2 DOCK –

3 Dock connector – connects iPod

4

VOLUME/

MODE – selects different play modes:

5

e.g. REPEAT or SHUFFLE (random order)

6 PROGRAM

For disc

For Tuner

7 ALBUM/PRESET

For MP3-CD/ WMA play:

– select albums

For Tuner

– selects a preset radio station

8 / – opens/closes the disc tray

SOURCE:–selects CD/MP3-CD, DOCK

9

0

POWER –powers on/off the system

!2;–

∞§

For disc

– skips to the beginning of a current/

– fast searches backwards and forwards

selects dock source

VOL +/- –

– programs tracks and reviews the

program

– auto searches and stores radio

stations

mode, Tuner or AUX

starts or pauses disc/DOCK playback

/ DOCK play:

previous/ later track

within a track

reception

adjusts volume level

+/- (

3, 4

)

player

For Tuner:

– tunes to a radio station

9 –stops disc playback;

–

erases a program

DBB – turns on/off bass enhancement

@ p – 3.5 mm stereo headphone socket

Helpful hints: The speakers will be muted
when headphones are connected to the set.

AUX jack –connects an external source

#

$ Battery door – opens to inser t 6 x 1.5V

% Disc tray – load a disc

^ iR – infrared sensor for remote control

(3.5 mm socket)

R-20/ -UM1/ D-cells

Remote control (See 1)

& CD – selects disc mode
* TUNER – selects tuner mode
( DOCK – selects dock (iPod) source
) AUX– selects AUX mode

9 –stops disc playback;

¡

–

erases a program

™ REPEAT – repeats a track/disc/all

£ SHUFFLE – turns on/off the random play

≤ DBB – turns on/off bass enhancement
∞ MUTE –mutes or restores the volume

programmed tracks

mode

Power Supply

Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.

Batteries
Main set (See 1)

• Insert 6 batteries, type R-20, UM1 or D-
cells (not included, preferably alkaline) with

the correct polarity.

Power Supply

Remote control

Important!

• Before using the remote control, remove
the insulation plastic tab as shown
in figure 9.

• If the remote control does not function
correctly or the operating range is
reduced, replace the battery with a new
(CR2025) type battery.

1 Pull the battery tray out as shown

in figure 9.

2 Replace a new battery according to polarity

indication, and fully inser t the battery tray
back to the original position.

• Incorrect use of batteries can cause elec­trolyte leakage and will corrode the compart­ment or cause the batteries to burst:

• Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same
type for the set.

• When inserting new batteries, do not try to
mix old batteries with the new ones.

• Remove the batteries if the set is not to be
used for a long time.

Batteries contain chemical substances, so
they should be disposed of properly.

Using AC power

1 Check if the power/mains voltage, as shown

on the type plate located on the
bottom of the set, corresponds to your

local power supply. If it does not, consult your
dealer or service center.

2 Connect the power cord to the

AC~ MAINS inlet and the wall socket.The

set is now ready for use.

3 To switch the set off completely, withdraw the

power cord from the wall socket.

4 Install the unit near the AC outlet and where

the AC power plug can be easily reached.

• Disconnect the power cord from the wall
socket to protect your set during heavy thun­derstorms. Children could seriously injure
themselves as the free end of the cable may
still be live if only the connector is removed
from the MAINS socket at the back of the
unit.

All markings are located on the bottom
of the set.

Auto power saving

• In CD and DOCK mode, if AZ1330D is in

the PAUSE position for 5
switch to the stop position.

• In CD and DOCK mode, if AZ1330D is in
the STOP position for 15
switch to standby to save power.

Helpful hints:

– To avoid unnecessary energy consumption,

always press POWER on the set to power
off the set after using the set.

minutes, it will auto

minutes, it will auto

CAUTION

- Visible and invisible laser radiation.
If the cover is open, do not look at
the beam.

- High voltage! Do not open.You run
the risk of getting an electric shock.
The machine does not contain any
user-serviceable parts.

- Modification of the product could
result in hazardous radiation of
EMC or other unsafe operation.

Basic functions

Switching on/off the set

1 To switch on, press POWER.

➜ Display lights up.The system will switch to

the last selected source.

2 To switch off, press POWER again.

➜ Display lights off.

Adjusting volume and sound

Adjust the sound with the VOLUME and
DBB controls.

Digital tuner

Tuning to radio stations

1 Press repeatedly SOURCE (or TUNER on

the remote control) to select FM or AM.

➜ “TUNER” is displayed briefly, then the

radio station frequency, waveband and, if
programmed, a preset number are shown
(See 2).

2 Press and hold ∞ or § until the frequency in

the display starts running.
➜ The radio automatically tunes to a station

of sufficient reception. Display shows

“

SEARCH” during automatic tuning.

3 Repeat step 2 if necessary until you find the

desired station.

• To tune to a weak station, press ∞ or §

briefly and repeatedly until you have found
optimal reception.

To improve radio reception:

• For FM, extend, incline and turn the tele-

scopic aerial. Reduce its length if the signal is
too strong.

• For AM, the set uses a built-in aerial. Direct

this aerial by turning the whole set.

Programming radio stations

You can store 15 FM and 10 AM radio
stations in the memory manually or
automatically (Auto store).

Manual programming

1 Tune to your desired station (see Tuning to

radio stations).

2 Press PROG to activate programming.

➜ Display: PROG flashes.

3 Press ALBUM/PRESET +/-

(ALBUM/PRESET

3, 4

on the remote
control ) once or more to allocate a number
(from 1 to 25).

4 Press PROG to confirm.

5 Repeat steps 1-4 to store other stations.

Helpful hints:

– You can erase a preset station by storing

another frequency in its place.

Autostore

Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.

1 Press repeatedly SOURCE (or TUNER on

the remote control) to select FM or AM.

2 Press PROG until “AUTO” flashes.

➜ Available stations are programmed (AM

or FM). After all stations are stored, the
first autostore preset station will then
automatically play.

To listen to a preset or autostore
station

Press the ALBUM/PRESET +/-
(ALBUM/PRESET

3, 4

on the remote
control ) buttons once or more until the
desired preset station is displayed.

Basic Function/ Radio MP3-CD/ CD Player

AVIS

MP3-CD/ CD Player

About MP3

The music compression technology MP3
(MPEG1 Audio Layer 3) significantly reduce
the digital data of an audio CD while
maintaining CD quality sound.

Getting MP3 files: you can either download

•

legal music files from the internet to your
computer hard disc, or create such files by
converting audio CD files in your computer
through appropriate encoder software.
(128kbps bit rate or higher is recommended
for MP3 files.)

•

Creating a MP3 CD: burn the music files

from your computer hard disc on a CDR or
CDRW using your CD burner.

Helpful hints:

– Make sure that the file names of the MP3 files

end with .mp3 or .wma.
– Number of albums: maximum 100.
– Number of tracks: maximum 999.
– The length of file names affects the number of

tracks for playback.With shorter file names,

more files can be burned on a disc.

Playing a disc

This player plays Audio Discs including CD-R/

CD-RW, MP3 CD and WMA. Do not try to

play a CD-ROM, CD-I, CDV, VCD, DVD or

computer CD.

IMPORTANT!

• CDs encoded with copyright protection

technologies by some record companies may

be unplayable by this product.

• DRM-protected WMA disc is not supported.

1 Press repeatedly SOURCE (CD on the

remote control) to select CD source.

➜ Display shows flashing “READ” if CD

source is selected (see 3).

➜ “ NO DISC” will be displayed if CD is not

loaded.

3 Press / to open the disc door.

4 Insert a disc with the printed side facing up

and press the disc door gently to close.
➜ The disc scanning of MP3-CD may run

longer than audio CD.

➜ Display: The total number of tracks

appears (and album number for
MP3/WMA) (see 4).

5 Press

6 To pause playback press

7 Press

8 To stop playback, press

– you open the disc compartment door;
– you select FM, AM, AUX or DOCK;
– the disc has reached the end of the playback.

2;

to start playback.

➜ First the song title of the track scrolls

across the display, then the track number
and the elapsed playing time are displayed.

For MP3-CD/ WMA only:

➜ The current track number (TRK) and

album number (ALB) will be displayed
interchangeably.

2;

.

➜ Display:2 and the elapsed playing time

flash.

2;

again to resume playback.

9

.

Helpful hints:

The disc playback will also stop when:

Selecting a different track

• Press ∞ or § once or repeatedly until the

desired track number appears in the display.

For MP3-CD/WMA: First press
ALBUM/PRESET +/- ( ALBUM/PRE-

3, 4

SET

more to find your album.

• In the pause/stop position, press 2; to start

playback.

on the remote control ) once or

MP3-CD/ CD Player

Finding a passage within a
track

1 During playback, press and hold down

∞ or §

.

➜ The disc is played at high speed and low

volume.

2 When you recognize the passage you want,

∞ or §

release
➜ Normal playback resumes.

.

Programming tracks

You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.

1 In the stop position, press

your desired track number.

• For MP3-CD/WMA: First press

ALBUM/PRESET +/- ( ALBUM/PRE-
SET

3, 4

more to find your album.

2 Press PROG to store desired track.

➜ Display shows “PRO 2” , indicating pro-

• If you attempt to program without first

selectig a track, display will show “SELECT
TRACK” briefly, then the total track number
and playing time.

3 Repeat steps 1 to 2 to select and store all

desired tracks.

4 Press

➜ “PROG” is dispalyed during program play-

To review your program

In the stop position, press and hold PROG 3
seconds.

➜ The display shows all the stored tracks

Helpful hints:

– Display shows “NO PROG” if no track is

programmed.

– If you try to store more than 20 tracks, no

track can be stored and the display will show
”PROGRAM FULL”.

on the remote control ) once or

grammed location (See 5).

2;

to play the program.

back.

(and album numbers for MP3) in
sequence.

∞or§

to select

To erase a program

You can erase a program by:

– pressing

– selecting FM, AM, AUX or DOCK;
– pressing POWER to power off;
– opening the disc door.

9

(twice during playback or once in

the stop position);

➜ “PROGRAM CLEAR” scrolls across the

display once, and “PROG” disappears.

Selecting different play
modes (See 6)

You can select and change the various play
modes before or during playback, and
combine play modes with PROG.

REP – plays the current track continuously.

REP ALL – plays the entire disc/program

continuously.

SHUF – plays all tracks in random order.

REP ALL SHUF – plays all tracks in

random order continuously.

1 To select play modes, press MODE on the

set (REPEAT or SHUFFLE on the remote
contorl) once or more.

2 Press 2; to star t playback if in the stop

position.
➜ Shuffle play will start automatically soon

after shuffle mode is selected.

3 To select normal playback, press MODE on

the set (REPEAT or SHUFFLE on the
remote control) repeatedly until the various
play modes are no longer displayed.
– You can also press 9 to cancel your play

modes.

Helpful hints:

– Shuffle (SHUF and REP ALL SHUF) play is

not available in the program mode.

DOCK

Auxiliary connection

Playing iPod using
AZ1330D

By connecting the iPod to your AZ1330D,
you can listen to the sound of the docked
player through the powerful speakers of the
Hi-Fi system.

Compatible portable player

•

Most Apple iPod models with 30-pin dock
connector as follows:

20GB, 40GB, 20/30GB photo, 40/60GB
photo, 30GB video, 60/80GB video, mini and
nano.

Dock adaptor

Before plugging your player in the dock, snap
the suitable dock adaptor into the dock to
provide a snug fit for the player to be docked.

Selecting the correct dock adaptor

• For the iPod dock, 8 dock adaptors of differ­ent type, as indicated at the back of the adap­tor, are included to fit the following iPod:
20GB, 40GB, 20/30GB photo, 40/60GB
photo, 30GB video, 60GB video, miniand nano.

Playing Apple iPod using AZ1330D

1 Snap the compatible iPod into the dock con-

nector.

•

AZ1330D will auto switch to DOCK source
(See 7).

2 For iPod, the connected player will play auto-

matically.

Notes:

–

By using the buttons ( 2;, ¡1, 2™ and VOL-
UME ) on the AZ1330D and its remote con­trol, the following disc playback features are avail­able: Play/Pause, selecting next/previous track, fast
forwarding/rewinding and changing volume.

–

The buttons ( 2;, ¡1, 2™ and VOLUME ) on
the AZ1330D and its remote control can work
only with playback of the audio contents stored
on the docked player.

Charging iPod battery using the dock

In the power-on and standby mode of
AZ1330D, you can charge the iPod when
docking.

Helpful hints:

–

In DOCK and CD mode, if AZ1330D is in the
STOP position for 15 minutes, it will auto switch
to standby.

Connecting an external device

You can listen to the sound of the connected
external device through your AZ1330D’s
speakers.

1 Press repeatedly SOURCE (or AUX on the

remote contorl) to select AUX mode.

2 Use the supplied Aux-in cable to connect

AZ1330D’s AUX jack (3.5 mm, located on
the top panel) to an AUDIO OUT or head­phone jack on an external equipment (such
as CD player, or VCR)

.

AVIS

Safety & Maintenance (See 8)

Safety information

• Place the set on a hard, flat and stable surface
so that the system does not tilt.

• Do not expose the set, batteries, CDs to
humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.

• The apparatus shall not be exposed to
dripping or splashing.

• Adequate ventilation with a minimum gap of
15 cm between the ventilation holes and sur­rounding surfaces is necessary to prevent
heat build-up.

• The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloths, cur tains, etc..

• No objects filled with liquids, such as vases,
shall be placed on the apparatus.

• No naked flame sources, such as lighted can­dles, should be placed on the apparatus.

• The mechanical par ts of the set contain
self-lubricating bearings and must not be oiled
or lubricated.

• To clean the set, use a dry cloth. Do not use
any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.

CD player and CD handling

• If the CD player cannot read CDs correctly,
use a cleaning CD to clean the lens before
taking the set to repair.

• The lens of the CD player should never be
touched!

• Sudden changes in the surrounding
temperature can cause condensation on the
lens of your CD player. Playing a CD is then
not possible. Do not attempt to clean the
lens but leave the set in a warm environment
until the moisture evaporates.

• Always close the CD door to avoid dust on
the lens.

• To clean the CD, wipe in a straight line from
the center towards the edge using a soft,
lint-free cloth. Do not use cleaning agents as
they may damage the disc.

• Never write on a CD or attach any stickers
to it.

No sound/ power

– Volume not adjusted

• Adjust the VOLUME
– Power cord not securely connected

• Connect the AC power cord properly
– Batteries dead/ incorrectly inserted

• Inser t (fresh) batteries correctly
– Disc contains non-audio files

• Inser t a suitable disc or press

∞ or §

once or
more skip to an audio track, instead of the data
files.

Display does not function properly/No
reaction to operation of any of the
controls

– Electrostatic discharge

• Switch off and unplug the set. Reconnect after a
few seconds.

no indication

– No disc inserted

• Inser t a suitable disc

– Disc badly scratched or dirty

• Replace/clean CD (See Maintenance)

– CD-R(W) is blank or the disc is not finalized.

• Use a finalized CD-R(W)

– Laser lens steam up

• Wait until lens has cleared.

Note:
Make sure the CD is not encoded with
Copyright protection technologies, as some
do not conform to the Compact
Disc standard.

The disc skips tracks

– Disc damaged or dirty

• Replace or clean disc
– Shuffle or program is active

• Switch off shuffle/program

Sound skips during MP3 playback

– MP3 file made at compression level exceeding

320kbps

• Use a lower compression level to record CD

tracks into MP3 format

– Disc damaged or dirty

• Replace or clean disc.

Note:

DRM-protected WMA disc is not supported.

Dock operation

–

The menu navigation or photo playback of the
docked player cannot be carried out through the
buttons on AZ1330D or its remote control.

• The buttons on AZ1330D and its remote control

can control playback of audio contents only.To
navigate the menu, use the controls on the
docked player.

–

Some buttons on AZ1330D and its remote con­trol have no function.

• The buttons ( 2;, ¡1, 2™ and VOLUME ) func-

tion only.

Troubleshooting

If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.

WARNING: Do not open the set as there is a risk of electric shock. Under no cir-

cumstances should you try to repair the set yourself, as this will inval­idate the guarantee.

English

Français Español

Printed in China PDCC-JH/ZC-0716

W

CLASS 1

LASER PRODUCT

AZ1330D

PHILIPS CONSUMER ELECTRONICS COMPANY

Marietta, GA 30006-0026, U.S.A.

Meet Philips at the Internet

http://www.philips.com