Docking Entertainment System AJ300D
User manual
1
1
2
3
4
$
%
5
POWER
PRESET VOL
SLEEP
AUX
DOCK
TUNER
6
0
7
MUTE
9
7
5
2
8
!
@
3
8
4
6
#
^
1
)
&
*
(
2
3
4
English
SUPPLIED ACCESSORIES
– 1X AC/DC 18V adapter
– Docking kit
•1X Apple iPod dock (pre-installed with AJ300D);1 X Philips GoGear jukebox
dock;
• dock adapters (8 adapters for different iPod types, and 4 adapters for
different Philips GoGear types)
– 1X AUX-IN cable
CONTROLS
1
2
3
4
5
6
7
8
(See 1)
POWER
– switches the system on or to standby mode
– stops active alarm for 24 hours
– deactivates the sleep function
¡1 / 2™
– adjust clock/alarm time
– selects previous/next tracks in the dock mode
– fast searches forward/backward in the dock mode (only available to iPod)
PRESET 1-5
– stores, recalls and shows radio station
SLEEP
– activates the sleep function
–
deactivates the sleep function
DOCK
– selects dock mode for Apple iPod and Philips GoGear
TUNER/ AUX
– selects FM radio mode
– selects AUX mode
2;
– starts/pauses playback in the dock mode
– selects 12 hour or 24 hour mode
VOL+/-
–
adjusts the sound level
9
MUTE
– switches playback sound off and on.
0
Display
–
shows clock/alarm times and status of the set
!
Dock connector (30 pins)
–
connects iPod/Philips GoGear player
@
ALM 2
–
activates/confirm ALARM 2 time setting
– displays ALARM 2 time
– switches off ALARM 2 time
#
REPEAT
ALARM /
BRIGHTNESS CONTROL
– switches off the alarm for a 9 minute period
– changes the brightness of the display illumination
$
POWER jack
–
socket for AC/DC 18V adapter
%
Pigtail – improves FM reception
^
ALM
1
–
activates/confirm ALARM 1 time setting
– displays ALARM 1 time
– switches off ALARM 1 time
&
TIME SET
– activates/confirm clock time/date setting
*
(Wake-up mode) DOCK•BUZZER •TUNER
– selects alarm mode: dock, buzzer or radio
(
AUX IN jack (3.5 mm)
–
connects to external audio source
)
RESET
– clears clock time setting
POWER SUPPLY
Mains adapter
Connect the mains adapter to the set's DC 18V socket and to the power socket.
1
Helpful hints: To avoid damage to the set, use only the adapter supplied!
The type plate is located on the bottom of the set.
Remote control
Important!
• Before using the remote control, remove the insulation plastic tab as
shown in the figure.
• If the remote control does not function correctly or the operating
range is reduced, replace the battery with a new (CR2025) type
battery.
1.
Pull the battery tray out as shown in the figure.
2.
Replace a new battery according to polarity indication, and fully insert the
battery tray back to the original position.
2
3
1
Battery contain chemical substances, so they should be disposed of
properly.
SELF-POWERED BACK-UP
The self-powered back-up conveniently allows your preset stations, alarm and clock
time settings to be stored for up to 10 minutes when there is a power interruption
e.g. AC power failure. The complete clock radio and backlight illumination will be
switched off.
If power supply returns after 10 minutes and the display shows:
• clock time blinking - indicates you need to re-adjust the clock time.
CAUTION
Visible and invisible laser radiation. If the cover is open, do not look
at the beam.
High voltage! Do not open.You run the risk of getting an electric
shock. The machine does not contain any user-serviceable parts.
Modification of the product could result in hazardous radiation of
EMC or other unsafe operation.
Loading...