Philips AC4062 User Manual

Philips
Clean air system

AC4062

Fresh air at home - Always

with 6-stage CleanAir System

Fresh air

• 6-stage CleanAir System for fresh air

• 3-stage ElectroClean system charges and traps all particles

• Active oxygen sterilizes pollutants and rejuvenuates filter

• 2-stage FreshAir system efficiently removes gases and odours

6-stage CleanAir System

3-stage ElectroClean filtration system

Active oxygen

2-stage FreshAir filtration system

Clean air system

AC4062

Specifications Product highlights

Technical Specifications

• Voltage: 220 - 240 V

• Frequency: 50/ 60 Hz

• Power Consumption: 61 (at 220V~, hi speed), 65
(at 220-240V~, hi speed)

W

• CADR: > 128 ft³/min

• Particle removal efficiency: > 99 (particle size at

0.02 - 10 µm)

%

• Gas removal efficiency: > 99 (run at hi speed over
3 mins inside 1m3 box)

%

• Recommended Room Size: Up to 40 m²

• Operating Temperature: 5 - 40 °C

• Operating Relative Humidity: 20 - 90 %

• Noise Level: < 47 (JIS compliance) dB

• Cord length: 1.8 m

Finishing

• Color - Air outlet mesh/ Control panel: Christal
Silver

• Color - Front Cover/ Air inlet mesh: Christal
Silver

• Color - Rear Housing: Translucent Algiers Blue

• Color - Control button: Silver Blue

Dimensions and weight

• Product: Approx. H490 x W481 x D220 mm;

7.9Kg

• F Box: Approx. H575 x W552 x D283 mm; 9.7Kg

Logistic data

• CTV: 8834 062 00000

• 12 NC: 8834 062 00010 (Western Europe), 8834
062 00710 (China)

• EAN F Box: 87 10103 31458 5 (Western Europe),
87 10103 31460 8 (China)

Replacement

• ESP particle filter: AC4106

• Zeolite gas filter: AC4116

•

6-stage CleanAir System

The advanced and innovative 6-stage CleanAir System
removes and sterilizes even the finest particles and a
wide spectrum of gases and odours. * The 3-stage
ElectroClean filtration system efficiently removes particles
* The 2-stage FreshAir filtration system removes gases
and odours * The active oxygen sterilizes trapped
particles and constantly rejuvenates the zeolite filter,
ensuring longlasting superiour performance

3-stage ElectroClean filtration system

The 3-stage ElectroClean filtration system works three
ways. * First, the pre-filter blocks larger particles, such as
hairs, anima l dand er and house du st all ergen s. * Se cond,
the finer particles that have passed through the pre-filter,
including bacteria and viruses, are charged by the Corona
Field Charger. * Third, the Electro-Static Precipitation
(ESP) filter attracts these charges particles to its surface
and keeps them safely trapped. With average use, the
cost-effective ESP filter only needs to be replaced once
every five years.

Active oxygen

The ac tive ox yg en, whi ch is gene ra ted by t he Corona F ie ld
Charger, sterilizes harmful germs such as bacteria and
vi rus es that are tra ppe d in the Electro-Static Precipitation
(ESP) filter. It then passes through the zeolite filter, where
it oxidizes the trapped gases, rendering them harmless.
Thanks to this process, the zeolite filter is constantly
rejuvenated and its life can be extended over many years.

2-stage FreshAir filtration system

The 2-stage FreshAir filtration system uses advanced
Nano-Confined Catalytic Oxidization (NCCO) technology.
Firstly, the hi-grade zeolite filter traps a wide spectrum of
gases and odours and subsequently uses the active
oxygen that passes through to neutralize them,
constantly rejuvenating the filter. Compared to the
traditional activated carbon filter, this hi-grade zeolite
filter performs more stably in different humidity
conditions, and because it is rejuvenated by the active
oxygen, it can last a much longer life of upto five years.

Issue date 2007-12-17

Version: 4.1

© 2007 Koninklijke Philips Electronics N.V.
All Rights reserved.

Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.

www.philips.com