Philips 55PL9224, 55PL9524, 62PL9524 User Manual

3135 035 22903

55PL9224
55PL9524
62PL9524

Refer to the Quick Use and Setup Guide (supplied with your TV)
for information on basic connections, remote control button
descriptions, on-screen menu language, and Autoprogram.

Highlights

• Liquid-crystal-on-silicon (LCOS) High-definition
Imaging

• High-resolution Display—1280 x 720 pixels

Features

• Digital Natural Motion™

• Active Control™—analyzes and adjusts incoming signal

•Two-tuner, Double-window PIP (Picture-in-Picture)

• Dolby

®

Virtual Surround, 30-watt RMS

• 3D Y/C Comb Filter

• HD Component and DVI Input

• Side AV Convenience Jacks

• Matching stand and swivel available

8/3/04

™

HDTV Monitor

HDTV Monitor

2

Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out.
Complete and return your Product Registration Card at once to ensure:

Return your Product Registration Card today

to get the very most from your purchase.

For Customer Use

Enter below the Serial No. which is
located on the rear of the cabinet. Retain
this information for future reference.

Model No. ________________________
Serial No. ________________________

Know these

safetysymbols

This “bolt of lightning” indicates

uninsulated material within your unit
may cause an electrical shock. For the safe­ty of everyone in your household, please
do not remove product covering.

The “exclamation point” calls atten-

tion to features for which you
should read the enclosed literature closely
to prevent operating and maintenance
problems.

CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.

ATTENTION:Pour éviter les choc élec­triques, introduire la lame la plus large de
la fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.

*Proof of
Purchase

Returning the enclosed card guarantees
that your date of purchase will be on file,
so no additional paperwork will be required
from you to obtain warranty service.

*Product Safety
Notification

By registering your product, you'll receive
notification - directly from the manufac­turer - in the rare case of a product
recall or safety defect.

*Additional Benefits
of Product Ownership

Registering your product guarantees that
you'll receive all of the privileges to
which you're entitled, including special
money-saving offers.

t

s

Congratulations on your purchase,
and welcome to the “family!”

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS.You’ve selected one of the
best-built, best-backed products available today.We’ll do everything in
our power to keep you happy with your purchase for many years to
come.

As a member of the PHILIPS “family,” you’re entitled to protection by
one of the most comprehensive warranties and outstanding service
networks in the industry.What’s more, your purchase guarantees
you’ll receive all the information and special offers for which you
qualify, plus easy access to accessories from our convenient home
shopping network.

Most importantly, you can count on our uncompromising commit­ment to your total satisfaction.

All of this is our way of saying welcome - and thanks for investing in
a PHILIPS product.

P. S. To get the most from your PHILIPS purchase, be
sure to complete and return your Product Registration
Card at once.

Visit our World Wide Web Site at http://www.philips.com

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance

with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat regis-

ters, stoves, or other apparatus (including amplifiers) that produce
heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug. Apolarized plug has two blades with one wider than
the other. A grounding type plug has two blades and third ground­ing prong. The wide blade or third prong are provided for your
safety. When the provided plug does not fit into your outlet, con­sult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particu-

larly at plugs, convenience receptacles, and the point where they
exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the app-

aratus. When a cart is used, use caution when moving

the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.

15. This product may contain lead and mercury. Disposal of these

materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local
authorities or the Electronic Industries Alliance: www.eiae.org

16. Damage Requiring Service - The appliance should be serviced

by qualified service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the appli-

ance; or

C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Tilt/Stability - All televisions must comply with recommended

international global safety standards for tilt and stability properties
of its cabinet design.

• Do not compromise these design standards by applying exces­sive pull force to the front, or top, of the cabinet which could ulti­mately overturn the product.

• Also, do not endanger yourself, or children, by placing electron­ic equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product dam­age and/or personal injury.

18. Wall or Ceiling Mounting - The appliance should be mounted to

a wall or ceiling only as recommended by the manufacturer.

19. Power Lines - An outdoor antenna should be located away from

power lines.

20. Outdoor Antenna Grounding - If an outside antenna is connected to

the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70­1984, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding connectors, location
of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure below.

21. Object and Liquid Entry - Care should be taken so that objects

do not fall and liquids are not spilled into the enclosure through
openings.

a) Warning: To reduce the risk of fire or electric shock, this appa­ratus should not be exposed to rain or moisture and objects filled
with liquids, such as vases, should not be placed on this apparatus.

22. Battery Usage CAUTION - To prevent battery leakage that may

result in bodily injury, property damage, or damage to the unit:

• Install all batteries correctly, with + and - aligned as marked on
the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.).

• Remove batteries when the unit is not used for a long time.

Example of Antenna Grounding
as per NEC - National Electric Code

Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC

that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

(NEC SECTION 810-20)

4

Contents

INTRODUCTION

Welcome/Registration of Your TV

. . . . . . . . . . . . . . . . .2

Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

CONNECTING ACCESSORY DEVICES

TO

YOUR TV

Information about TV Signals . . . . . . . . . . . . . . . . . . . . . . . .6

Descriptions of Jacks, Cables, and Connectors . . . . . . . . . . .7

Panel Jack Compatibility Information . . . . . . . . . . . . . . . . . .8

Pre-connection Recommendations . . . . . . . . . . . . . . . . . . .9

Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Connecting a VCR and Cable Box . . . . . . . . . . . . . . . . . . .11

Connecting an S-Video Device . . . . . . . . . . . . . . . . . . . . .12

Connecting a Standard DVD Player . . . . . . . . . . . . . . . . . .13

Connecting a Progressive-scan DVD Player . . . . . . . . . . . .14

Connecting an HD Satellite Receiver to YPbPr . . . . . . . . .15

Connecting an HD Satellite Receiver to DVI . . . . . . . . . . .16

Connecting Surround Sound Equipment . . . . . . . . . . . . . .17

Connecting to the Side Inputs: Video Game System . . . . .18

Labeling the Audio/Video Input Sources . . . . . . . . . . . . . . .19

USING THE REMOTE CONTROL

Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . .20-21

Programming the Remote Control . . . . . . . . . . . . . . . .22-23

Programming the Remote Control: Set-up Codes . . . . .24-25

Operating Accessory Devices with the TV Remote . . .26–27

Using Active Control™ Plus . . . . . . . . . . . . . . . . . . . . . . .28

USING THE ON-SCREEN MENUS

PICTURE

Adjusting/Setting the Picture Controls . . . . . . . . . . . . . . . .29

Selecting a Digital Processing Option . . . . . . . . . . . . . . . . .30

Selecting a Dynamic Contrast Option . . . . . . . . . . . . . . . .31

Selecting a DNR (Dynamic Noise Reduction) Option . . . .32

Turning on Color Enhancement . . . . . . . . . . . . . . . . . . . . .33

Selecting an AutoPicture™ Option . . . . . . . . . . . . . . . . . .34

Selecting a Picture Format Option . . . . . . . . . . . . . . . .35–36

SOUND

Adjusting the TV and Headphone Volume . . . . . . . . . . . . .37

Selecting a TV Equalizer Option . . . . . . . . . . . . . . . . . . . . .38

Adjusting TV Speaker Balance . . . . . . . . . . . . . . . . . . . . . .39

Turning Loudness on or off . . . . . . . . . . . . . . . . . . . . . . . .40

Selecting a Sound Mode Option . . . . . . . . . . . . . . . . . . . .41

Using Alternate Audio (SAP) . . . . . . . . . . . . . . . . . . . . . . .42

Setting the TV for Stereo Programming . . . . . . . . . . . . . . .43

Turning the AVL (Audio Volume Leveler) on or off . . . . . .44

Adjusting the Delta Volume . . . . . . . . . . . . . . . . . . . . . . . .45

Selecting an AutoSound™ Option . . . . . . . . . . . . . . . . . . .46

FEATURES

Using Closed Captioning . . . . . . . . . . . . . . . . . . . . . . . . . .47

Setting the Sleeptimer . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

CHANNELS

Using the Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Removing Channels from the Channel List . . . . . . . . . . . .51

Using Lock Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Using Lock After . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Blocking Programming Based on TV Ratings . . . . . . . . . . .54

Blocking Programming Based on Movie Ratings . . . . . . . . .55

Turning the Antenna Attenuator on or off . . . . . . . . . . . . .56

GENERAL

Using Surf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Using Dual Screen and PIP . . . . . . . . . . . . . . . . . . . . . . . . .58

Changing Channels or Input Sources in Dual Screen/PIP . .59

Selecting a Picture Freeze Option . . . . . . . . . . . . . . . . . . .60

Resetting the Audio/Video Settings to Factory

Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Selecting an On-screen Display Option . . . . . . . . . . . . . . .62

Setting up or Changing a PIN (Personal

Identification Number) . . . . . . . . . . . . . . . . . . . . . . . . . .63

Setting the Subwoofer Control . . . . . . . . . . . . . . . . . . . . .64

Setting the Clock—Auto Clock Mode . . . . . . . . . . . . . . . .65

Setting the Clock Manually . . . . . . . . . . . . . . . . . . . . . . . .66

Selecting a Time Zone and Setting the Daylight

Savings Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Using Installation Features: Language and Autoprogram . . .68

ADDITIONAL INFORMATION

Cleaning the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Cleaning or Replacing the Filters . . . . . . . . . . . . . . . . . . . .70

Replacing the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . .71–72

Resetting the Lamp’s Lifetime Counter . . . . . . . . . . . . . . .73

Tr oubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74-75

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

CH

G

5

Items Included with This TV

Features

Compact design with low weight

The unique Philips single-panel liquid-crystal-on-silicon (LCOS)
technology allows for a large screen TV with a very low depth
and low weight. This TV will find a place in any living room
without occupying a large area, and it can be easily handled by
two persons.

Philips Single-panel LCOS Imaging System

The Philips single-panel LCOS technology produces unmatched
high-resolution and flicker-free video with superb brightness.
This technology enables a large-screen-size TV with low weight
and shallow depth without any concerns for convergence or
image retention.

Digital Natural Motion™

Digital Natural Motion™ offers razor-sharp reproduction of
movement and motion. Its unique and highly advanced process­ing calculates motion trajectories of moving picture elements. It
corrects jerky movement from both studio programs or movie
material.

ActiveControl™ Plus

Active Control™ Plus automatically analyzes the incoming sig­nals from the Tuner, AV1, AV2, and Side video inputs 50 times
per second and adjusts key picture settings. In addition to meas­uring picture noise, this feature uses an ambient light sensor to
adjust the picture settings according to viewing conditions in the
room.

Dolby* Virtual Surround

Dolby processing circuitry provides an enhanced cinema sur­round sound effect without the need for rear speakers.

Double-window,Two-Tuner PIP

Your TV features double-window, two-tuner PIP with second
tuner double window. The TV also has single PIP (free position­ing), as well as threefold and sixfold side PIPs. In addition, you
get photo finish, freeze Main, and freeze PIP. Replay lets you
play back the previous few seconds in a PIP screen—if you
missed the action, replay it as much as you want.

Audio/Video (A/V) Jack Panel

The A/V jack panel allows direct connections with VCRs,
DVDs, high-definition receivers, or other devices, providing
quality TV picture and sound playback.

Audio Volume Leveler (AVL) Control

AVL keeps the TV sound at an even level. Peaks and valleys that
occur at commercial breaks or during program changes are
reduced, providing a more consistent, comfortable sound.

V-Chip (with Channel Lock)

The V-Chip feature (with Channel Lock) will allow you to block
the viewing of channels or programs with certain ratings, and thus
prevent your children from watching inappropriate materials.

Autoprogramming

The TV’s Autoprogram feature searches (when activated) for all
available channels from regular antenna or cable signals and
stores active broadcast stations in the TV’s memory.

Surf Button

Philips Auto Surf™ allows you to easily switch between only
the channels that are of interest to you. Surf allows two-channel
surfing or nine-channel surfing.

Your new television and its packing contain materials that can
be recycled and reused. Specialized companies can recycle
your product to increase the amount of reusable materials and
minimize the amounts that need to be properly disposed of.
Your product also uses batteries that should not be thrown
away when depleted, but should be handed in and disposed of
as small chemical waste.
When you replace your existing equipment, please find out
about the local regulations regarding disposal of your old tel­evision, batteries, and packing materials.

End-of-Life Disposal

As an Energy Star® Partner, Philips Consumer
Electronics has determined this product meets the

Energy Star® guidelines for energy efficiency.
Energy Star® is a U.S. registered mark. Using products with the
Energy Star® label can save energy. Saving energy reduces air pol­lution and lowers utility bills.

As you unpack your TV, please note the included items:

• Quick Use and Setup Guide to help you set up your new TV.

• Directions for Use manual—contains information on safety,
set maintenance, Factory Service Center locations, and prod­uct warranty

•Warranty Registration Card

• Remote Control (with supplied batteries).

Please take a few minutes to complete your registration card.
The serial number for the TV is on the rear of the set. For
your future reference, please write down the serial and
model number of this television in the space provided on the
warranty page at the back of this manual. (In the unlikely
event you should need to place a service call, these numbers
will be needed.)

*Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol are trademarks of Dolby Laboratories.

Active Control, AutoPicture, AutoSound, AutoSurf, Cineos, Digital
Crystal Clear, Digital Natural Motion, and Pixel Plus are trademarks
of Philips Consumer Electronics. Copyright 2004 Philips Consumer
Electronics. All rights reserved.

6

Ways TV Signals Can Come to Your Home

Your High-definition-ready Set

Over the Air

Satellite

Cable

High-definition television offers a picture with unprecedented crispness and clarity. The TV broadcast industry is moving toward high definition as

the signal standard. Currently, the number of programs being broadcast in high definition is limited, but this is changing. To view high-definition programs on
your TV, you will need to connect a satellite receiver, cable box, or set-top box that can decode HD signals.

Resolution information

Image resolutions are commonly referred to by a num­ber followed by a letter: 480i, 480p, 720p and 1080i.
The number in each format refers to the number of lines
of resolution, so for example both 480i and 480p offer
480 lines of resolution. The "i" or "p" refers to whether
the signal is displayed using respectively interlaced or
progressive scan. Interlaced scan breaks each frame of
video into 2 fields, one made up of even lines and one
made up of odd lines. The image is reproduced by draw­ing all odd lines first (1,3,5,…479) than all the even
ones (2,4,6,….,480). Progressive scan, on the other hand
reproduces an image by drawing all lines in succession
1,2,3,4,….480).

Interlaced Scan

Progressive Scan

Satellite TV

Company

Cable TV

Company

Analog

Digital

Signal

Signal

Cable TV Signal (Analog)

Satellites

Home Satellite Dish

Telephone Line

TV

Antenna

at Your

Home

Satellite

Receiver

at Your

Home

For Direct Connection

to Your TV or to a

Cable Box, VCR, or

Satellite Receiver

DVD619 DVD/CD PLAYER

STOP

OPEN/CLOSE

PLAY PAUSE

GUIDE

POWER

SELECT

INFO

HIGH DEFINITION

STANDBY-ON

POWER

PREV NEXT

Odd lines Even Lines

Lines in succession

7

Descriptions of Jacks, Cables, and Connectors

This page contains descriptions and illustrations of jacks, cables,
and connectors you might use in making connections. The cables
and connectors are not supplied with your TV, but you can pur­chase at your electronics dealer. Or you can order them by calling
our Customer Care Center at 1-800-531-0039.

Antenna RF Jack

Cable Used: RF

Coaxial (75Ω)

Push-on
Type Cable

Screw-on
Type Cable

Signal Splitter

Cables Used: RF

Coaxial (75Ω)

Video (Composite) Jack

Cable Used:Video with
RCA-type Phono Plugs

Or

S-VIDEO Jack

Cable Used: S-Video

Component Video Jacks

Cables Used: Component

Video with RCA-type

Phono Plugs

DVI-D Jack

Cables Used: DVI-D

DVI-D Input Jack
Cable used: DVI-D

This jack works only with DVI TMDS
(Transition Minimized Differential Signaling)
digital video. Allows encrypted transmissions
of uncompressed digital content. The DVI-D
jack used in this product is not for computer
connections.

Component Video Input Jacks
Cables used: component video with
RCA-type phono plugs

Allow you to connect accessory devices such
as DVD players. Separating the video into
three signals, these inputs provide excellent
quality. Be sure to connect the left and right
audio cables, because the Y, Pb, Pr jacks
receive only the picture signal.

NOTE: See the “Helpful Hint” on page 13
for more information.

S-Video Input Jacks
Cable used: S-Video

Provide a higher quality picture than the
Video (composite) jacks because the color
part of the picture is separated from the black
and white portion. Be sure to connect the left
and right audio cables, because the S-Video
jacks receive only the picture signal.

VGA/HD15 Jack

Cable Used: HD DB15

RGB+HV Input Jack
Cable used: HD DB15

Allows you to connect equipment with RGB
or VGA output.

Video (called “CVBS” or “composite”)
Input Jacks
Cable used:Video with RCA-type
phono plugs

Provide better picture performance than the
antenna RF input. Be sure to connect the audio
cables, because the video jacks receive only the
picture signal.

Your TV also has a monitor output (“MON
OUT”) video (“V”) jack. Use a video cable with
RCA-type phone plugs to make connections.

Tuner (RF) Input Jack
Cables used: RF coaxial cable (75Ω)

Allows you to connect an antenna, cable TV,
or components having RF outputs to the
antenna input on the TV. RF coaxial cables
are available in push-on or screw-on type.

Audio Input Jacks
Cables used:Audio with RCA-type phono
plugs

Provide sound for the video inputs. If your acces­sory device has only one output for audio, connect
it to the left (color coded white) audio jack on the
TV.

Your TV also has monitor output (“MON OUT”)
audio (“L” and “R”) jacks and a subwoofer output
(“SUB OUT”) jack. Use an audio cable with RCA­type phone plugs to make connections.

Audio Jacks

Cables Used:
Audio with RCA­type Phono Plugs

Signal Splitter

Allows you to route an antenna or cable TV
signal to two inputs.

3.5mm Stereo Mini Phone
Plug to RCA Jack Adapter

Allows a connection between the

3.5mm stereo audio out jack on a com­puter and the left and right audio inputs
on the television. Connect A/V cables
with RCA-type phono plugs to the
adapter, then to the TV.

3.5mm Stereo Mini Phone Plug
to RCA Jack Adapter

300- to 75-ohm

Twin-lead Adapter

300- to 75-ohm Twin-lead Adapter

Accepts twin-lead wires from an antenna and
allows connection to the antenna input on the
TV. If your antenna is already equipped with
an RF coaxial cable you will not need this
adapter.

DVI

Pr Pb Y

TUNER

TUNER

G

S-VIDEO

RGB+HV

V

RL

8

Panel Jack Compatibility Information

Jack Panel Located
on the Left Side of
the TV

SIDE JACK PANEL
Signals accepted: NTSC (480i).
Inputs available: S-Video (Y/C)

and CVBS, plus audio left and
right.
Output available: Headphone.
Only one of the inputs can be used
at a time. Select the Side source,
and the TV detects the input to
which you have connected.
Connections must be made to the
audio inputs for sound.

10

1

AV 1 Input Jacks
Signals accepted: NTSC (480i).
Inputs available: YPbPr, S-Video (Y/C), and

CVBS, plus audio left and right.

Use only one of the video signal inputs at a time.

If you should forget and have more than one type of
signal connected, the set will automatically show the
one of better quality: CVBS—good, S-Video—bet­ter, and YPbPr—best. For sound, connections must
be made to the AV1 audio inputs.

2

MON OUT Output Jacks

Provide video and audio output signals from all TV
when those sources are being viewed on the main
screen. Output from the audio L/R jacks is at a fixed
volume level; changing the TV volume does not
affect them. Adjust the volume at your external
home cinema system.

3

AV 2 Input Jacks
Signals accepted: NTSC (480i).
Inputs available: S-Video (Y/C) and CVBS, plus

audio left and right.

Use only one of the video signal inputs at a time.

If you should forget and have both types of signal
connected, the set will automatically show the
S-Video, since it is of better quality than CVBS. For
sound, connections must be made to the AV2 audio
inputs.

4

SUB OUT Output Jack

Provides a signal to an external powered subwoofer.

5

AV3 Input Jacks
Signals accepted: NTSC (480i), 480p, 720p, and

1080i, plus audio left and right.
Inputs available: YPbPr, plus audio. For sound,
connections must be made to the AV3 audio inputs.

6

AV4 Input Jacks
Signals accepted: NTSC (480i), 480p, 720p, and

1080i, plus audio left and right.
Inputs available: YPbPr, plus audio. For sound,
connections must be made to the AV4 audio inputs.

7

TUNER Input Jack
Signals accepted: RF modulated NTSC.
Inputs available: 75Ω RF coaxial.

8

AV5 Input Connectors
Signals accepted: NTSC (480i), 480p, 720p, 1080i,

and VGA plus audio left and right.
Inputs available: RGB+HV. For sound, connec­tions must be made to the AV5 audio inputs.

9

AV6 Input Connectors
Signals accepted: Digital only (TMDS [Transition
Minimized Differential Signaling] encoded, uncom-

pressed); DVI 480i, 480p, 720p, and 1080i, plus
audio left and right.
Inputs available: DVI TMDS, plus audio. For
sound, connections must be made to the AV6 audio
inputs.
Intended use of the input: digital set-top boxes and
inputs from other digital video devices.

NOTE: This DVI jack is not for computer con­nections. VGAcannot be connected.

Definitions:
NTSC—National Television System Committee.
CVBS—labeled “V,” provides a small step up in quality from the Tuner (RF) input. Called

Composite Video.
S-Video (Y/C)—provides better picture quality than CVBS. Separates the signal into color and

brightness.
YPbPr—provides the best quality video signal. Called Component Video Input, the signal is

split into three parts, two color and one brightness.

C

2

SERVICE 1

1

RLV

AV1MONSUB OUT AV2AV3AV4

G

S-VIDEO

DVI

9

2

Pr Pb Y

RL

OUT

3

RL

G

S-VIDEO

4

5

5

RL

RL

6

V

V

STANDARD/

HD INPUTS

STANDARD/

HD INPUTS

AV5 AV6

RL

RL

RGB+HV

Pr Pb Y

Pr Pb Y

8

7

TUNER

10

9

Pre-connection Recommendations

Positioning the TV

Before connecting accessory devices—VCR,
DVD player, or HD satellite receiver, for exam­ple—please keep the following in mind:

• Place the TV on a flat surface. An unlevel sur­face may adversely affect picture perform­ance.

• Do not place the TV on shag carpet or any
surface that will block the ventilation open­ings at the bottom of the set. Blockage will
cause the TV to overheat and shut down.

• Allow 4 to 6 inches of space behind the TV
for ventilation.

• An optional swivel and an optional stand are
available for use with your TV. See your elec­tronics dealer.

•Test various locations in the room to find the
optimal spot to locate the set for best viewing.

• Do not place the TV in direct sunlight or near
a heating appliance.

•Do not expose the TV to rain or moisture.

•To prevent any unsafe situations, do not place
objects on top of the TV.

Providing Protection Against Power
Surges

• Connect all accessory devices before you
plug any of their power cords into the wall
outlet or power strip. NEVER plug your TV
into an outlet that is controlled by a wall
switch.

•Turn off the TV and/or accessory devices
before you connect or disconnect any cables.

• Ensure that all antennas and cables are prop­erly grounded. See page 3, “Important Safety
Instructions.”

Protecting Accessory Devices from
Overheating

• Arrange accessory devices so that air can cir­culate freely around them.

• Don’t stack the accessory devices. Arrange
them to allow for good ventilation. The
optional Philips stand provides enough room
for two accessory devices, side by side.

• If you connect an audio receiver or amplifier,
place it on the top shelf so the heated air from
it will not flow around other components.

Connecting Cables

Be sure to insert each cable firmly into the cor­rect jack.

Using the Connection Examples in
This Manual

The accessory device jack panels shown are for
example purpose only. The jack panels on your
accessory devices may look different. Also, note
that connections can be made in various ways.
The examples are presented only as guides.

Allow 4 to 6 inch­es behind the TV
for ventilation.

Place the TV on
a flat surface.

Do not place the TV on a surface that will block
the air filters located underneath the set.

Situate the TV where
it will not be exposed
to heat or moisture.

For safety, do not
set objects on top
of the TV.

Optional Swivel

Optional Stand

DVD619 DVD/CD PLAYER

GUIDE

POWER

POWER

SELECT

INFO

HIGH DEFINITION

STANDBY-ON

STOP

OPEN/CLOSE

PLAY PAUSE

PREV NEXT

10

1

Connect the incoming antenna or cable
TV signal to the ANT IN jack on the
back of the VCR.

2

Using a coaxial cable, connect to the
OUT jack on the back of the VCR and
to the TUNER jack on the back of the
TV.

3

Using A/V cables, connect from the
AUDIO and VIDEO OUT jacks on the
back of the VCR to the corresponding
AV2 audio (L and R) and video (V)
jacks on the back of the TV.

4

Press the AV+ button on the remote
control to access the Source list.

5

Press the Cursor Up or Down button to
select the AV2 input source.

6

Press the OK button to confirm your
choice. The set is now switched to the
AV2 input source for the viewing of pro­grams from the VCR.

NOTE: Since you’ve connected the
cable TV signal directly to the TV’s
tuner (step 2 above), you can watch the
unscrambled programs by simply tun­ing to the desired channel. To store
channels in the TV’s memory, you
must use Autoprogram, which you can
access through “Install” in the TV’s
on-screen menu. See the Autoprogram
section in the Quick Use and Setup
Guide that came with the TV. If you
use Autoprogram, you can select chan­nels by pressing the CH + or – buttons
on the TV remote control (in TV
mode). Otherwise, you must press the
digit (number) buttons to tune directly
to the channel you desire.

Connecting a VCR

Back of TV

Incoming Cable TV

or Antenna Signal

Back of VCR

(example only)

Color Coding Used on Jacks and Plugs to
simplify connections:
Yellow: Video (Composite Video)
Red: Right Audio
White: Left Audio.

HELPFUL HINT

OK

Source

TV
AV1:Other
AV2:Other
AV3:Other
AV4:Other
AV5:Other
AV6:Other
SIDE

:Other

C

2

SERVICE 1

AV1MONSUB OUT AV2AV3AV4

OUT

G

S-VIDEO

RLV

Pr Pb Y

RL

V

V

RL

G

S-VIDEO

RL

STANDARD/

HD INPUTS

STANDARD/

HD INPUTS

RL

DVI

3

RL

RL

AV5 AV6

RGB+HV

Pr Pb Y

Pr Pb Y

AUDIO

L

OUT

R

VIDEO

OUT

2

TUNER

ANT

OUT

IN

IN

CH3 CH4

IN

1

4

6

5

INFO

SELECT

DNM

SURR

CC

®

®

®

ACTIVE SLEEP

CONTROL

HD

SCREEN

5

FORMAT

®

P

TIMER

CLOCK

AUTO

TV

SURF

PIP

AV+

SAP

AUTO

11

Connecting a VCR and Cable Box

NOTE: A cable box with AUDIO OUT jacks
such as the one used in the example on this
page might pass stereo sound to the TV. Check
with your cable TV company. The RF jack out­put jack on a cable box (commonly labeled
“OUT TO TV,” “OUTPUT,” or “OUT”) will
not pass stereo sound to your TV.

1

Connect the incoming cable TV signal
to a two-way signal splitter. The signal
splitter enables you to route the cable
signal to the TV without using the
OUT TO TV jack on the cable box,
which will not pass stereo sound to the
TV.

2

Using a coaxial cable, connect to one
of the connectors on the signal splitter
and to the TUNER jack on the back of
the TV.

3

Using a coaxial cable, connect to the
other connector on the signal splitter
and to the CABLE IN jack on the back
of the cable box.

4

Using Audio/Video cables, connect to
the AUDIO and VIDEO OUT jacks on
the back of the cable box and to the
corresponding AUDIO and VIDEO IN
jacks on the back of the VCR.

5

Using Audio/Video cables, connect to
the AUDIO and VIDEO OUT jacks on
the back of the VCR and to the corre­sponding AV2 audio (L and R) and
video (V) input jacks on the back of
the TV.

6

Press the AV+ button on the remote
control to access the Source list.

7

Press the Cursor Up or Down button to
select the AV2 input source.

8

Press the OK button to confirm your
choice. The set is now switched to the
AV2 input source for the viewing of pro­grams from the cable box or the VCR.

Back of TV

Incoming
Cable TV

Signal

Back of VCR

(example only)

Back of Cable Box (example only)

Signal

Splitter

NOTE: Since you’ve connected the
cable TV signal directly to the TV’s
tuner (step 2 above), you can watch
the unscrambled programs by sim­ply tuning to the desired channel. To
store channels in the TV’s memory,
you must use Autoprogram, which
you can access through “Install” in
the TV’s on-screen menu. See the
Autoprogram section in the Quick
Use and Setup Guide that came with
the TV. If you use Autoprogram,
you can select channels by pressing
the CH + or – buttons on the TV
remote control (in TV mode).
Otherwise, you must press the digit
(number) buttons to tune directly to
the channel you desire.

Color Coding Used on Jacks and Plugs to
simplify connections:
Yellow: Video (Composite Video)
Red: Right Audio
White: Left Audio.

HELPFUL HINT

Source

8

7

6

C

2

SERVICE 1

AV1MONSUB OUT AV2AV3AV4

OUT

G

S-VIDEO

RLV

Pr Pb Y

RL

V

RL

V

G

S-VIDEO

RL

STANDARD/

HD INPUTS

STANDARD/

HD INPUTS

RL

5

AV5 AV6

DVI

RL

RL

RGB+HV

Pr Pb Y

2

Pr Pb Y

1

TUNER

4

AUDIO

L

ANT

OUT

IN

OUT

R

VIDEO

IN

CH3 CH4

IN

OUT

TV
AV1:Other

OK

AV2:Other
AV3:Other
AV4:Other
AV5:Other
AV6:Other
SIDE

:Other

3

INFO

SELECT

DNM

SURR

CC

TV

SURF

PIP

AV+

SAP

AUTO

®

®

®

ACTIVE SLEEP

CONTROL

TIMER

SCREEN
FORMAT

®

P

CLOCK

AUTO

HD

7

OUTPUT

CH

CABLE

IN

3 4

TO
TV

VIDEO

OUT

RL

AUDIO

OUT

12

1

Using an S-Video cable, connect to the
S-Video output on the back of the
S-Video device and to the AV2 S­VIDEO input.

2

Using Stereo Audio cables, connect to
the AUDIO OUT jacks on the back of
the
S-Video device and to the correspon­ding AV2 audio inputs (L and R).

3

Press the AV+ button on the remote
control to access the Source list.

4

Press the Cursor Up or Down button to
select the AV2 input source.

5

Press the OK button to confirm your
choice. The set is now switched to the
AV2 input source for the viewing of
programs from the S-Video device.

Connecting an S-Video Device

Back of Standard S-Video Device

(example only)

Back of TV

To simplify making connections, the connec­tors on audio and video cables are often color
coded to match the colors on TV jacks, red for
right, and white for left.

HELPFUL HINT

2

1

TV

OK

Source

AV1:Other
AV2:Other
AV3:Other
AV4:Other
AV5:Other
AV6:Other
SIDE

:Other

C

2

SERVICE 1

AV1MONSUB OUT AV2AV3AV4

OUT

G

S-VIDEO

RLV

Pr Pb Y

RL

V

V

RL

G

S-VIDEO

RL

STANDARD/

HD INPUTS

STANDARD/

HD INPUTS

RL

DVI

RL

RL

AV5 AV6

RGB+HV

Pr Pb Y

L R
AUDIO OUT

TUNER

VIDEO

ANT/CABLE

OUT

IN

Pr Pb Y

S-VIDEO

OUT

3

5

4

INFO

SELECT

DNM

SURR

CC

TV

SURF

PIP

AV+

SAP

AUTO

®

®

®

ACTIVE SLEEP

CONTROL

TIMER

SCREEN
FORMAT

®

CLOCK

AUTO

HD

P

4

13

1

Using Audio/Video cables, connect to
the YPbPr jacks on the back of the
standard DVD player and to the AV1
YPbPr jacks on the back of the TV.

2

Using Stereo Audio cables, connect to
the AUDIO OUT jacks on the back of
the DVD player and to the correspon­ding AV1 audio (L and R) jacks on the
back of the TV.

3

Press the AV+ button on the remote
control to access the Source list.

4

Press the Cursor Up or Down button to
select the AV1 input source.

5

Press the OK button to confirm your
choice. The set is now switched to the
AV1 input source for the viewing of pro­grams from the DVD player.

Connecting a Standard DVD Player

Back of TV

Back of Standard DVD Player

(example only)

• If you do not know whether your DVD
player is standard or progressive scan, you
can connect it to either AV3 or AV4, and the
TV will automatically determine the type of
output.

•To simplify making connections, the con­nectors on audio and video cables are often
color coded to match the colors on TV
jacks: green for Y, blue for Pb, and red for
Pr; also red for right audio, and white for
left audio.

• The names for the component video jacks
may differ depending on the DVD player or
accessory digital source equipment used.
For example, besides YPbPr, you may see
R-Y/B-Y/Y; or CrCbY. Although abbrevia­tions and terms may vary, the letters Band
R stand for the blue and red color compo­nent signal connectors, respectively, and Y
indicates the luminance signal. If necessary,
refer to the user manual for your DVD or
digital accessory for more information.

• If you experience difficulties receiving
sound with a DVD disc, check the sound
settings through the DVD disc’s menu.

HELPFUL HINTS

5

4

3

Source

C

2

SERVICE 1

2

AV1MONSUB OUT AV2AV3AV4

OUT

PCM-MPEG2-Dolby Digital-DTS

COAXIAL

DIGITAL AUDIO OUT

G

S-VIDEO

RLV

Pr Pb Y

RL

RL

G

S-VIDEO

RL

STANDARD/

HD INPUTS

STANDARD/

HD INPUTS

RL

SUB WF OUT

OPT OUT

DVI

1

V

RL

RL

V

AV5 AV6

RGB+HV

Pr Pb Y

(CVBS)

VIDEO OUT

TUNER

1

2

PR/C

R

Y

P

B/CB

VIDEO OUT

(Y/C)

S-VIDEO OUT

Pr Pb Y

1

2

L

R

AUDIO OUT

TV

OK

AV1:Other
AV2:Other
AV3:Other
AV4:Other
AV5:Other
AV6:Other
SIDE

:Other

INFO

SELECT

DNM

SURR

CC

TV

SURF

PIP

AV+

SAP

AUTO

®

®

®

ACTIVE SLEEP

CONTROL

TIMER

SCREEN
FORMAT

®

P

CLOCK

AUTO

HD

4

STANDBY-ON

DVD619 DVD/CD PLAYER

OPEN/CLOSE

PLAY PAUSE

STOP

PREV NEXT

14

1

Using Audio/Video cables, connect to
the YPbPr jacks on the back of the pro­gressive-scan DVD player and to the
AV3 or AV4 YPbPr jacks on the back of
the TV.

2

Using Stereo Audio cables, connect to
the AUDIO OUT jacks on the back of
the DVD player and to the correspon­ding AV3 or AV4 audio (L and R) jacks
on the back of the TV.

3

If your DVD player has an I/P switch
on the back, be sure it is set to the “P”
position for progressive-scan mode.
NOTE: Some DVD players have an
I/P switch on the back, while others
may allow the user to change the mode
by pressing a button on the DVD play­er’s remote control or by using the
DVD player’s on-screen menu. Also,
some DVD players have dedicated pro­gressive-scan output jacks that are
labeled as such and require no switch­ing by the user. See the user manual for
your DVD player for more information
on placing the player in progressive­scan mode.

4

Press the AV+ button on the remote
control to access the Source list.

5

Press the Cursor Up or Down button to
select the AV3 input source.

6

Press the OK button to confirm your
choice. The set is now switched to the
AV3 input source for the viewing of pro­grams from the DVD player.

Connecting a Progressive-scan DVD Player

Back of TV

Back of Progressive-

scan DVD Player

(example only)

•To simplify making connections, the con­nectors on audio and video cables are often
color coded to match the colors on TV
jacks: green for Y, blue for Pb, and red for
Pr; also red for right audio, and white for
left audio.

• The names for the component video jacks
may differ depending on the DVD player or
accessory digital source equipment used.
For example, besides YPbPr, you may see
R-Y/B-Y/Y; or CrCbY. Although abbrevia­tions and terms may vary, the letters Band
R stand for the blue and red color compo­nent signal connectors, respectively, and Y
indicates the luminance signal. If necessary,
refer to the user manual for your DVD or
digital accessory for more information.

• If you experience difficulties receiving
sound with a DVD disc, check the sound
settings through the DVD disc’s menu.

HELPFUL HINTS

Inputs AV3–AV6 allow horizontal and vertical
picture panning using the Cursor Left, Right,
Up, and Down buttons. The Side input allows
vertical picture panning; left and right panning
with the Side input is possible when the input
has been labeled “Game.” See pages 18 and 19
for details on side panel connections and
source labeling.

HELPFUL HINT

3

Source

I

OK

SELECT

2

VIDEO OUT

P

--­AV2:Other
AV3:Other
AV4:Other
AV5:Other
AV6:Other
SIDE

:Other

C

2

SERVICE 1

AV1MONSUB OUT AV2AV3AV4

Y

VIDEO

B

P

PR

G

RLV

Pr Pb Y

RL

OUT

RL

G

RL

RL

S

S-VIDEO

S-VIDEO

V

V

STANDARD/

HD INPUTS

STANDARD/

HD INPUTS

AV5 AV6

DVI

RL

RL

RGB+HV

Pr Pb Y

Pr Pb Y

AUDIO OUT

2CH

L

R

DVD619 DVD/CD PLAYER

STANDBY-ON

1

TUNER

BITSTREAM

/PCM

OPTICAL

COAXIAL

DIGITAL

AC IN ~

OPEN/CLOSE

PLAY PAUSE

STOP

PREV NEXT

4

6

5

INFO

SELECT

DNM

SURR

CC

TV

SURF

PIP

HD

SCREEN

5

FORMAT

®

®

®

®

P

AV+

ACTIVE SLEEP

CONTROL

TIMER

SAP

CLOCK

AUTO

AUTO

15

1

Using Component Video cables, con­nect to the YPbPr jacks on the back of
the HD satellite receiver and to the cor­responding AV3 or AV4 YPbPr jacks
on the back of the TV.

2

Using Stereo Audio cables, connect to
the AUDIO OUT jacks on the back of
the HD satellite receiver and to the cor­responding AV3 or AV4 audio (L and
R) jacks on the back of the TV.

3

Refer to the user manual for the HD
satellite receiver to complete the con­nections to the HD satellite receiver
and to use the HD satellite receiver’s
on-screen setup menus.

4

After completing HD satellite receiver
connections and setup through the on­screen setup menus, press the AV+ but­ton on the TV remote to access the
Source list.

5

Press the Cursor Up or Down button to
select the AV4 input source.

6

Press the OK button to confirm your
choice. The set is now switched to the
AV4 input source for the viewing of pro­grams from the HD satellite receiver.

Connecting an HD Satellite Receiver to YPbPr

Back of TV

Back of HD

Satellite Receiver

(example only)

•To simplify making connections, the con­nectors on audio and video cables are often
color coded to match the colors on TV
jacks: green for Y, blue for Pb, and red for
Pr; also red for right audio, and white for
left audio.

• The names for the component video jacks
may differ depending on the DVD player or
accessory digital source equipment used.
For example, besides YPbPr, you may see
R-Y/B-Y/Y; or CrCbY. Although abbrevia­tions and terms may vary, the letters Band
R stand for the blue and red color compo­nent signal connectors, respectively, and Y
indicates the luminance signal. If necessary,
refer to the user manual for your DVD or
digital accessory for more information.

• Inputs AV3–AV6 allow horizontal and verti­cal picture panning using the Cursor Left,
Right, Up, and Down buttons. The Side
input allows vertical picture panning; left
and right panning with the Side input is pos­sible when the input has been labeled
“Game.” See pages 18 and 19 for details on
side panel connections and source labeling.

HELPFUL H

INTS

2

___
AV3:Other

OK

Source

AV4:Other
AV5:Other
AV6:Other
SIDE

:Other

C

2

SERVICE 1

V

V

CONTROL

VCR

S-VIDEO

AV5 AV6

DVI

RL

RL

RGB+HV

Pr Pb Y

Pr Pb Y

DIGITAL

AUDIO OUT

1

TUNER

OUT TO TV

CH 3
CH 4

IN FROM ANT SATELLITE IN

G

S-VIDEO

RLV

AV1MONSUB OUT AV2AV3AV4

Pr Pb Y

RL

OUT

RL

G

S-VIDEO

RL

STANDARD/

HD INPUTS

STANDARD/

HD INPUTS

RL

AUDIO

AUDIO

Y

PB

RF

PR

REMOTEPHONE JACK

L

L

RR

VIDEOVIDEO

HIGH DEFINITION

POWER

GUIDE

POWER

SELECT

INFO

4

6

5

3

User Manual

INFO

SELECT

DNM

SURR

CC

TV

SURF

PIP

AV+

SAP

AUTO

®

®

®

ACTIVE SLEEP

CONTROL

TIMER

SCREEN
FORMAT

®

CLOCK

AUTO

HD

P

5

for

HD Satellite

Receiver

16

1

Using a DVI cable, connect to the DVI
jack on the back of the HD satellite
receiver and to the corresponding AV6
DVI jack on the back of the TV.

2

Using Stereo Audio cables, connect to
the AUDIO OUT jacks on the back of
the HD satellite receiver and to the
corresponding AV6 audio (L and R)
jacks on the back of the TV.

3

Refer to the user manual for the HD
satellite receiver to complete the con­nections to the HD satellite receiver
and to use the HD satellite receiver’s
on-screen setup menus.

4

After completing HD satellite receiver
connections and setup through the on­screen setup menus, press the AV+ but­ton on the TV remote to access the
Source list.

5

Press the Cursor Up or Down button to
select the AV6 input source.

6

Press the OK button to confirm your
choice. The set is now switched to the
AV6 input source for the viewing of
programs from the HD satellite receiver.

Connecting an HD Satellite Receiver to DVI

Back of TV

Back of HD Satellite Receiver

(example only)

•To simplify making connections, the con-

nectors on audio cables are often color
coded to match the colors on TV jacks: red
for right audio, and white for left audio.

• Because DVI is such new technology, the

electronics industry is still working
toward a decision on one standard.
Philips testing has determined that com­patibility issues exist with respect to a
limited number of high-definition
receivers when they are connected to the
DVI input on this television. If you
should experience difficulties, please
contact our Customer Care Center at 1­800-531-0039.

• Inputs AV3–AV6 allow horizontal and verti-

cal picture panning using the Cursor Left,
Right, Up, and Down buttons. The Side
input allows vertical picture panning; left
and right panning with the Side input is
possible when the input has been labeled
“Game.” See pages 18 and 19 for details on
side panel connections and source labeling.

HELPFUL HINTS

AIR IN

SATELLITE IN

DIGITAL OUT

CABLE IN

(OPTICAL)

--­AV5:Other

OK

Source

AV6:Other
SIDE:Other

DOLBY

2

RESOLUTION SELECT

1080i 720p 480p/i

C

SERVICE 1

AV1MONSUB OUT AV2AV3AV4

OUT

G

S-VIDEO

RLV

Pr Pb Y

RL

V

V

RL

G

S-VIDEO

RL

STANDARD/

HD INPUTS

STANDARD/

HD INPUTS

RL

ACCESS CARD

DVI/HDCP OUT

1

DVI

2

RL

RL

AV5 AV6

RGB+HV

Pr Pb Y

Pr Pb Y

DTV OUTPUT SELECT

RGB/Y PB P

R

DVI

RGB OUT

TV OUT

TUNER

VIDEO OUT

COMPONENT

2

1

Y

L1

P

B

L2

P

R

R1

R2

CH

AUDIO OUT

3 4

OUT

DOLBY
DIGITAL

(COAXIAL)

U

L

®

LISTED

VCR

E207602

CONTROL

7H74

AUDIO/VIDEO PRODUCT

Lt

AUDIO

TEL LINE

Rt

S-VIDEO

4

6

5

3

User Manual

INFO

SELECT

DNM

SURR

CC

TV

SURF

PIP

AV+

SAP

AUTO

®

®

®

ACTIVE SLEEP

CONTROL

HD

SCREEN

5

FORMAT

®

P

TIMER

CLOCK

AUTO

for

HD Satellite

Receiver

17

Connecting Surround Sound Equipment

Back of TV

Back of Receiver

(example only)

Surround (Back)

Speakers

Front

Speakers

Powered

Subwoofer

1

Using Stereo Audio cables, connect to
the MON OUT L and R jacks on the
back of the TV and to the correspon­ding TV IN jacks on the back of the
receiver.

2

Using an Audio cable, connect to the
SUB OUT jack on the back of the TV
and to the Audio Input jack on the
back of a powered subwoofer.

3

Using speaker wires, connect to the R
and L Front Speakers terminals and to
the corresponding terminals on the
backs of the front speakers.

4

Using speaker wires, connect to the
Surround Speakers terminals (+, –) on
the back of the receiver and to the cor­responding terminals (+, –) on the back
of the surround speakers.

5

Press the Menu button on the remote
control to display the on-screen menu.

6

Press the Cursor Down button to select
“Settings.”

7

Press the Cursor Right button to select
“General.”

8

Press the Cursor Down button repeat­edly until “Subwoofer” is selected.

9

Press the Cursor Right or Left button
to select “Yes.”

NOTE: “Yes” must be activated for the
Subwoofer menu selection before the
SUB OUT jack will supply output. This
is because the subwoofer’s low frequen­cies are redirected to the main TV
speakers when “No” is selected.

To simplify making connections,
the connectors on audio cables are
often color coded to match the col­ors on TV jacks: red for right audio,
and white for left audio.

HELPFUL HINT

3

Settings

Daylight saving

Change PIN

Subwoofer

Lamp rating

Lamp replaced

General

No • Yes

C

2

SERVICE 1

DVI

G

S-VIDEO

RLV

AV1MONSUB OUT AV2AV3AV4

Pr Pb Y

V

RL

RL

OUT

RL

RL

V

G

S-VIDEO

AV5 AV6

RGB+HV

Pr Pb Y

RL

STANDARD/
HD INPUTS

TUNER

Pr Pb Y
STANDARD/
HD INPUTS

RL

C

2

SERVICE 1

G

S-VIDEO

RLV

AV1MONSUB OUT AV2AV3AV4

Pr Pb Y

RL

OUT

RL

G

S-VIDEO

Audio
Input

180

Phase

0

RL

RL

4

STANDARD/
HD INPUTS

STANDARD/
HD INPUTS

DVI

V

V

AV5 AV6

RL

RL

RGB+HV

Pr Pb Y

Pr Pb Y

TUNER

4

+-

+

-

1

General

Settings

Daylight saving

Change PIN

Subwoofer

Lamp rating

Lamp replaced

Yes • No

6
8

9

INFO

SELECT

DNM

TV

SURF

PIP

HD

SCREEN

9

FORMAT

®

®

®

®

5

7

SURR

CC

18

1

Using the Audio/Video cable supplied
with your video game system, connect
to the back of the game system and to
the corresponding S-VIDEO and
AUDIO (L and R) jacks in the Side
panel of the TV.

NOTE: If your game system cable
does not have an S-Video plug, you
can instead make a regular Video
connection.

2

Press the Source button on the TV
remote control to access the Source
list.

3

Press the Cursor Up or Down button to
select the Side input source.

4

Press the OK button to confirm your
choice. The set is now switched to the
Side input source for the viewing of
your video game system.

Connecting to the Side Inputs:Video Game System

Panel on

Side of

TV

Back of Game System

(example only)

The side panel is also
convenient for con­necting equipment
such as camcorders or
cameras. If the equip­ment has an S-Video
output jack, it is the
suggested one to use
for your connection to receive the best pic­ture. Otherwise, you can make a regular
Video connection. You must also make an
audio connection (L and R for stereo or L for
mono) to receive sound. Neither an S-Video
or Video cable carries a sound signal.

Camcorder

You can label the Side Audio/Video
input source “Game” if you would like.
See page 19 for details on labeling.

•To simplify making connections, the con­nectors on audio and video cables are
often color coded to match the colors on
TV jacks: yellow for video (composite),
red for right audio, and white for left
audio.

• Inputs AV3–AV6 allow horizontal and verti­cal picture panning using the Cursor Left,
Right, Up, and Down buttons. The Side
input allows vertical picture panning; left
and right panning with the Side input is
possible when the input has been labeled
“Game.” See page 19 for details on source
labeling.

HELPFUL HINTS

--­AV6:Other

OK

Source

SIDE:Other

INFO

SELECT

DNM

SURR

CC

4

3

TV

SURF

PIP

HD

SCREEN

3

FORMAT

®

®

®

®

P

2

AV+

SAP

AUTO

ACTIVE SLEEP

CONTROL

TIMER

CLOCK

AUTO

1

19

Labeling the Audio/Video Input Sources

This is just a sample of what the
labeling might look like. Your
Source Labels will depend on the
options you choose to label the
AV inputs.

You can label all the external Audio/Video
input sources—A V1, AV2, A V3, AV4, A V5,
AV6, and Side—according to the type of
accessory device you have connected to each
input.

After labeling, you can use the Source button
to cycle through and select your desired
source. The labels will appear alongside the
channel indicator when you select the AV
input sources.

1

Press the Menu button on the remote
control to display the on-screen menu.

2

Press the Cursor Down button to select
“Settings.”

3

Press the Cursor Right button repeated­ly to select the “Source” menu.

4

Press the Cursor Down button repeat­edly to select any of the AV Inputs—
AV1, AV2, A V3, AV4, A V5, AV6, or
Side. Alist of labels will appear next to
the selected AV input.

5

Press the Cursor Right button to enter
the list.

6

Press the Cursor Up or Down button to
scroll and select one of the labels in the
list.

7

Press the Menu button on the remote
control to remove the on-screen menu
from the TV screen.

8

Press the Source button on the remote
control to display the list of AV inputs
and their labels.

Settings

Demo

Install

8

Picture Sound Features Channels

TV

INFO

SELECT

CC

TV

6

SURF

®

®

®

PIP

2
4
6

AV+

ACTIVE SLEEP

CONTROL

SAP

AUTO

TIMER

SURR

DNM

HD

SCREEN

FORMAT

®

P

CLOCK

AUTO

3
5

1
7

Settings

Demo

Install

Settings

Settings

Settings

TV

General Clock Source

Source

AV1

AV2

AV3

AV4

Source

AV1
AV2
AV3
AV4

Source

AV1

--­Other

--­Other

8

Source

OK

TV
AV1:DVD
AV2:Recorder
AV3:SAT
AV4:HD
AV5:Other
AV6:HD
SIDE:Camera

Settings

Source

---

AV1

Cable
DVD
SAT
Recorder

---

20

Select (CBL VCR DVD SAT AMP) and Backlight

Press this button to cycle across the accessory mode dial. Stop pressing
when the mode you desire is lighted. The light will stay on for 2 seconds
and then begin blinking to indicate the remote is in your desired mode. As
long as the button blinks, the remote is in the accessory mode. (See pages
22–25 for programming the remote) Pressing and holding the Select button
for 2 seconds backlights the remote control buttons. The buttons remain
lighted for 5 seconds after you press Select.

Information Plus

Press to show information (when available) about the current channel, pro­gram, source, number or name, local time, CC availability, SAPavailabili­ty, program ratings, display format, sound mode, and remaining length of a
Sleeptimer setting.

TV

Press to directly set the TV into the TV Mode of operation.

CC (Closed Captioning)

Press to turn Closed Captioning off, on, or on during mute. (See page 47
in the Directions for Use manual.)

Surf

If you set the Surf control in the TV’s on-screen menu to two channels, this
button will allow you to toggle between the current channel and the last
viewed channel. If you choose the nine-channel Surf, pressing this button
allows you to add and scroll up to nine of your favorite channels. See page
57 in the Directions for Use manual.

OK

Press to activate or confirm menu choices.

Dual Screen/PIP (Picture-in-Picture)

Press to turn the PIP dual screen on or off. Continuing to hold the Dual
Screen/PIP button down will cycle through the Dual Screen/PIP options.
(See page 58 in the Directions for Use manual.)

VOL (Volume)

Press + or – to adjust the volume.

Mute

Press to interrupt or restore sound.

Source (AV+)

Press to display a list of source options—TV, AV1, AV2, AV3, AV4, AV5,
AV6, or Side. Use the Cursor Up/Down buttons to select the next item,
then press the OK button to confirm or press the Source Select button to
select the next item in the list.

Alternate Audio (SAP)

When you tune to a channel where SAP (Second Audio Program) is avail­able, you can toggle between Main and SAP. If SAP is not available, only
Main can be selected. (See page 42 in the Directions for Use manual.)

AutoSound™

Press to select the next item in the AutoSound™ menu. The factory-set
options are Speech, Music, Movies, and Multimedia, each corresponding
with specific settings of treble and bass. You can also select the Personal
option, which is based on the adjustments you make through the Sound
menu. (See page 46 in the Directions for Use.)

Active Control™ Plus

NOTE: Active Control™ Plus is not available for use with the AV3, AV4,
AV5, and AV6 input sources.

Press to toggle the options Off, Minimum, Medium, and Maximum.
Maximum is the recommended option. (See page 28 in the Directions for
Use manual.)

Active Control, AutoSurf, Incredible Surround, are trademarks of
Philips Consumer Electronics. Copyright 2004 Philips Consumer
Electronics. All rights reserved.

*Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol are trademarks of Dolby Laboratories.

Remote Control Buttons

INFO

TV

SURF

PIP

SELECT

CC

®

DNM

SURR

HD

SCREEN

FORMAT

®

®

®

P

AV+

ACTIVE SLEEP

CONTROL

SAP

AUTO

TIMER

CLOCK

AUTO

21

Standby–On (Power)

Press to turn the TV on or off.
NOTE: The TV is never powered off completely unless it is physically

unplugged from the power source.

DNM

Press to turn the Digital Natural Motion function on or off.

VCR/DVD Mode

When in the remote control is in the VCR (DVD) mode of operation,
these buttons will allow you record, rewind, stop playback, play, or fast­forward playback.

Surround Sound

Press to display a list of available sound modes. Choose from Incredible
Surround™ and Dolby* Virtual settings. (See page 41 in the Directions
for Use manual)

HD

Press to activate the AV6 (High Definition) jacks and place the TV into
the High Definition Mode of operation.

Screen Format

Press to display a list of available picture formats for showing video
images in the traditional 4:3 proportions. Press this button repeatedly to
select a picture format. Choose from Automatic, Super zoom, Panoramic,
4:3, Movie expand 14:9, Movie expand 16:9, 16:9 subtitle, and Wide
screen. See pages 35–36 in the Directions for Use manual.

NOTES:

•With AV3–AV6 connections, the Automatic picture
format option is not available.

• In Dual Screen mode, press the Picture Format button to switch
between a full or 4:3 letterbox picture format.

Cursor Up, Down, Right, Left

Use to navigate the on-screen menu and make control adjustments or set­tings.

Additionally, use these buttons to pan the screen up or down to show any
excluded parts of the picture.

Menu On/Off

Press to display the TV’s on-screen menu or to turn it off.

CH (Channel Selection)

Press to browse through the TV channels.

Digit (Number Buttons)

Press to directly access a specific TV channel. For a two- or three-digit
channel, enter all numbers. Press a single- digit button and hold a bit
longer to directly access a single-digit channel. These buttons can also be
used to enter values in certain on-screen menu controls.

Clock (Time Display)

Press to display the current time on the TV screen. (See page 65 in the
Directions for Use manual to set the clock)

AutoPicture™

Press to select the next item in the AutoPicture™ menu. The factory-set
options are Rich, Natural, Soft, Multimedia, and Eco, each corresponding
with specific factory settings of Contrast, Color, Sharpness, DNR,
Dynamic Contrast, and Color enhancements. You can also select the
Personal option, which is based on the adjustments or settings you make
through the Picture menu. (See page 34 in the Directions for Use.)

Sleeptimer

Press to set the sleeptimer feature to turn the TV off automatically. You
can choose—5 minutes up to 180 minutes in 5-minute increments.

INFO

Remote Control Buttons

TV

SURF

PIP

AV+

SAP

AUTO

CC

®

ACTIVE SLEEP

CONTROL

SELECT

®

®

TIMER

SURR

DNM

HD

SCREEN

FORMAT

®

P

CLOCK

AUTO

22

Programming the Remote Control

Your TV remote control can operate accesso­ry devices such as cable boxes, VCRs, DVD
players, satellite receivers, and amplifiers.

Normally, the remote is in TV mode. You
must press the Select button to switch the
remote to one of the accessory modes—CBL,
VCR, DVD, SAT, or AMP.

It is likely you will need to program you
remote, but, before you do, try this test:

• Press the Select button repeatedly until the
mode you desire lights up. When the light
begins blinking, point the remote toward
the accessory device, then press the
Standby–On button. If the device responds
you do not need to program the remote. If
not, follow the steps below to program the
remote.

1

Look up the number for the device on
the list below:
1 Cable (CBL)
2 VCR
3 DVD
4 Satellite (SAT)
5 Amplifier (AMP).
Look up the number for the manufac­turer on pages 24–25.

2

Press the Select and Standby–On but­tons at the same time, then release.

3

Press the number for the device fol­lowed by the manufacturers code. The
green Standby-On light will blink,
indicating the code is valid. If the light
does not blink, start again at step 1
using another code (if available).

CBL

VCR

DVD

SAT

AMP

STANDBY-ON

HIGH DEFINITION

POWER

GUIDE

SELECT

POWER

INFO

DVD619 DVD/CD PLAYER

OPEN/CLOSE

STOP

PREV NEXT

PLAY PAUSE

2

INFO

SELECT

DNM

SURR

CC

TV

SURF

2

®

PIP

HD

SCREEN
FORMAT

®

®

®

AV+

SAP

AUTO

ACTIVE SLEEP

CONTROL

TIMER

CLOCK

AUTO

P

3

23

Programming the Remote Control

You can change the duration of the time-out
mode by simultaneously pressing the Select
button and a digit button, 1–4. Using digit 1
will set the time-out to 15 seconds; digit 2, 30
seconds; digit 3, 60 seconds; and digit 4, 120
seconds. The default time-out setting after
you replace the batteries in the remote is 60
seconds. All modes will have the same time­out setting.

cc

C

HECK IT OUT

If the remote control is in one of the acces­sory modes (a mode light is flashing)—
CBL, VCR, DVD, SAT, AMP—and you
don’t press any of the remote buttons for
sixty seconds, a “time-out” occurs, returning
the remote to TV mode.

HELPFUL HINT

Now try to use the remote control with the
accessory device to see if it is correctly pro­grammed.

4

Press the Select button on the remote
to select the type of device. When the
mode you desire lights up, stop press­ing the button. When the light begins
blinking the remote is ready for use
with the device.

5

Press the Standby–On button. As long
as the light keeps blinking, you can use
the remote with the selected device.
Once the light disappears, the remote
is back in TV mode.

If the device does not respond to the
Standby–On command, repeat steps 1­6 using a different code. If there are no
other for the type and brand of acces­sory device, the remote likely will not
operate your particular model of acces­sory device.

NOTE: Your TV remote is not necessarily
capable of operating all models of the brands
of accessory devices listed on pages 24–25.
You may want to try the programming
process again. Try using the number(s) that
are listed for your type and brand of device to
be sure you did not make a mistake in
inputting the digits during your first attempt
at programming.

STANDBY-ON

DVD619 DVD/CD PLAYER

4

SURF

OPEN/CLOSE

PLAY PAUSE

STOP

PREV NEXT

5

INFO

SELECT

DNM

SURR

CC

TV

®

PIP

HD

SCREEN
FORMAT

®

®

®

P

AV+

ACTIVE SLEEP

CONTROL

TIMER

SAP

AUTO

CLOCK

AUTO

24

Programming the Remote Control: Setup Codes

Amplifier

Carver . . . . . . . . . . . . . . . . . . . . . . . . . . .0296

Curtis Mathes . . . . . . . . . . . . . . . . . . . . .0327

GE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0105

JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0358

Linn . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0296

Magnavox . . . . . . . . . . . . . . . . . . . . . . . .0296

Marantz . . . . . . . . . . . . . . . . . . . . . . . . . .0296

Optimus . . . . . . . . . . . . . . . . . . . . .0422, 0327

Philips . . . . . . . . . . . . . . . . . . . . . . . . . . .0296

Pioneer . . . . . . . . . . . . . . . . . . . . . . . . . .0327

Polk Audio . . . . . . . . . . . . . . . . . . . . . . . .0296

RCA . . . . . . . . . . . . . . . . . . . . . . . . . . . .0327

Realistic . . . . . . . . . . . . . . . . . . . . . . . . .0422

Sony . . . . . . . . . . . . . . . . . . . . . . .0716, 0247

Soundesign . . . . . . . . . . . . . . . . . . . . . . .0105

Victor . . . . . . . . . . . . . . . . . . . . . . . . . . . .0358

Wards . . . . . . . . . . . . . . . . . . . . . . . . . . .0105

Yamaha . . . . . . . . . . . . . . . . . . . . . . . . . .0381

Cable Box

ABC . . . . . . . . . . . . . . . . . . .0030, 0034, 0035

Allegro . . . . . . . . . . . . . . . . . . . . . .0180, 0342

Americast . . . . . . . . . . . . . . . . . . . . . . . .0926

Archer . . . . . . . . . . . . . . . . . . . . . .0180, 0824

BellSouth . . . . . . . . . . . . . . . . . . . . . . . . .0926

Century . . . . . . . . . . . . . . . . . . . . . . . . . .0180

Citizen . . . . . . . . . . . . . . . . . . . . . .0180, 0342

Comtronics . . . . . . . . . . . . . . . . . . . . . . .0067

Contec . . . . . . . . . . . . . . . . . . . . . . . . . .0046

Emerson . . . . . . . . . . . . . . . . . . . . . . . . .0824

Everquest . . . . . . . . . . . . . . . . . . .0042, 0067

Focus . . . . . . . . . . . . . . . . . . . . . . . . . . .0427

Garrard . . . . . . . . . . . . . . . . . . . . . . . . . .0180

Gemini . . . . . . . . . . . . . . . . . . . . . . . . . .0042

General Instrument . . . . . . . . . . . .0503, 0837

GoldStar . . . . . . . . . . . . . . . . . . . .0067, 0171

Goodmind . . . . . . . . . . . . . . . . . . . . . . . .0824

Hamlin . . . . . . . . . . . .0047, 0036, 0286, 0061

Hytex . . . . . . . . . . . . . . . . . . . . . . . . . . . .0034

Jasco . . . . . . . . . . . . . . . . . .0042, 0180, 0342

Jerrold . . . . . . . . . . . .0030, 0039, 0503, 0042,

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0837

Memorex . . . . . . . . . . . . . . . . . . . . . . . . .0027

Motorola . . . . . . . . . . . . . . . . . . . . . . . . .1133

Movie Time . . . . . . . . . . . . . . . . . . . . . . .0090

NSC . . . . . . . . . . . . . . . . . . . . . . . . . . . .0090

Oak . . . . . . . . . . . . . . . . . . . . . . . .0046, 0034

Optimus . . . . . . . . . . . . . . . . . . . . . . . . . .0048

Panasonic . . . . . . . . . . . . . .0048, 0134, 0027

Paragon . . . . . . . . . . . . . . . . . . . . . . . . .0027

Philips . . . . . . . . . . . . . . . . .0180, 0332, 0344

Pioneer . . . . . . . . . . . . . . . .0171, 0560, 0904

Popular Mechanics . . . . . . . . . . . . . . . . .0427

Pulsar . . . . . . . . . . . . . . . . . . . . . . . . . . .0027

Quasar . . . . . . . . . . . . . . . . . . . . . . . . . .0027

RCA . . . . . . . . . . . . . . . . . . . . . . . . . . . .0048

Radio Shack . . . . . . . .0042, 0910, 0342, 0824

Recoton . . . . . . . . . . . . . . . . . . . . . . . . . .0427

Regal . . . . . . . . . . . . . . . . . . . . . . .0047, 0286

Runco . . . . . . . . . . . . . . . . . . . . . . . . . . .0027

SL Marx . . . . . . . . . . . . . . . . . . . . . . . . . .0067

Samsung . . . . . . . . . . . . . . . . . . . .0067, 0171

Scientific Atlanta . . . . . . . . . .0035, 0504, 0904

Signal . . . . . . . . . . . . . . . . . . . . . .0042, 0067

Sprucer . . . . . . . . . . . . . . . . . . . . . . . . . .0048

Starcom . . . . . . . . . . . . . . . . . . . . .0030, 0042

Stargate . . . . . . . . . . . . . . . .0067, 0042, 0824

Starquest . . . . . . . . . . . . . . . . . . . . . . . . .0042

TV86 . . . . . . . . . . . . . . . . . . . . . . . . . . . .0090

Teleview . . . . . . . . . . . . . . . . . . . . . . . . .0067

Tocom . . . . . . . . . . . . . . . . . . . . . . . . . . .0039

Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . .0027

Tusa . . . . . . . . . . . . . . . . . . . . . . . . . . . .0042

Unika . . . . . . . . . . . . . . . . . . . . . . . . . . . .0180

United Artists . . . . . . . . . . . . . . . . . . . . . .0034

Universal . . . . . . . . . . . . . . . . . . . .0180, 0218

Viewstar . . . . . . . . . . . . . . . . . . . . . . . . .0090

Zenith . . . . . . . . . . . . . . . . . .0027, 0552, 0926

Zentek . . . . . . . . . . . . . . . . . . . . . . . . . . .0427

Surround Sound Receiver

ADC . . . . . . . . . . . . . . . . . . . . . . . . . . . .0558

Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . . .0148

Capetronic . . . . . . . . . . . . . . . . . . . . . . . .0558

Carver . . . . . . . . . . . . . . . . .0069, 1116, 1216

Casio . . . . . . . . . . . . . . . . . . . . . . . . . . . .0222

Clarinette . . . . . . . . . . . . . . . . . . . . . . . . .0222

Denon . . . . . . . . . . . . . . . . . . . . . .1187, 1131

Fisher . . . . . . . . . . . . . . . . . . . . . . . . . . .0069

Garrard . . . . . . . . . . . . . . . . . . . . . . . . . .0490

Harman/Kardon . . . . . . . . . . . . . . . . . . . .0137

JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0101

Kenwood . . . . . . . . . .1054, 0069, 0213, 1340

. . . . . . . . . . . . . . . . . . . . . . . . . . .1596, 1597

Lloyd's . . . . . . . . . . . . . . . . . . . . . . . . . . .0222

MCS . . . . . . . . . . . . . . . . . . . . . . . . . . . .0066

Magnavox . . . . . . . . . .0418, 1116, 0558, 1216

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0222

Marantz . . . . . . . . . . . . . . . .1116, 1216, 0066

Modulaire . . . . . . . . . . . . . . . . . . . . . . . .0222

Nakamichi . . . . . . . . . . . . . . . . . . . . . . . .0124

Onkyo . . . . . . . . . . . . . . . . . . . . . . . . . . .0162

Optimus . . . . . . . . . . .1050, 0213, 0558, 0069

Panasonic . . . . . . . . . . . . . . . . . . .0066, 1545

Penney . . . . . . . . . . . . . . . . . . . . . . . . . .0222

Philips . . . . . . . . . . . . .1116, 1216, 1296, 0418

Pioneer . . . . . . . . . . . . . . . .0177, 0558, 1050

Proscan . . . . . . . . . . . . . . . . . . . . . . . . . .1281

Quasar . . . . . . . . . . . . . . . . . . . . . . . . . .0066

RCA . . . . . . . . . . . . . . . . . . .1281, 0558, 1050

Realistic . . . . . . . . . . . . . . . . . . . . . . . . .0222

Sansui . . . . . . . . . . . . . . . . . . . . . . . . . . .1116

Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . .0213

Sherwood . . . . . . . . . . . . . . . . . . . . . . . .0529

Sony . . . . . . . . . . . . . . . . . .1185, 1085, 1285

Sunfire . . . . . . . . . . . . . . . . . . . . . . . . . .1340

Teac . . . . . . . . . . . . . . . . . . . . . . . . . . . .0490

Technics . . . . . . . . . . .0066, 1335, 1545, 1336

Thorens . . . . . . . . . . . . . . . . . . . . . . . . . .1216

Victor . . . . . . . . . . . . . . . . . . . . . . . . . . . .0101

Yamaha . . . . . . . . . . . . . . . .0203, 0213, 1203

Yorx . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0222

Satellite Receiver

AlphaStar . . . . . . . . . . . . . . . . . . . . . . . .0799

Echostar . . . . . . . . . . . . . . . . . . . .1032, 0802

Expressvu . . . . . . . . . . . . . . . . . . . . . . . .0802

GE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0593

General Instrument . . . . . . . .0388, 0896, 0654

HTS . . . . . . . . . . . . . . . . . . . . . . . . . . . .0802

Hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . .0846

Hughes Network Systems . . . . . . . . . . . .0776

JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0802

Jerrold . . . . . . . . . . . . . . . . . . . . . .0388, 0654

Magnavox . . . . . . . . . . . . . . . . . . .0749, 0751

Memorex . . . . . . . . . . . . . . . . . . . . . . . . .0751

Next Level . . . . . . . . . . . . . . . . . . . . . . . .0896

Panasonic . . . . . . . . . . . . . . . . . . . . . . . .0728

Philips . . . . . . . . . . . . . . . . .1103, 0749, 0751

Primestar . . . . . . . . . . . . . . . . . . . .0654, 0388

RCA . . . . . . . . . . . . .0593, 0170, 0419, 0882

Radio Shack . . . . . . . . . . . . . . . . . . . . . .0896

Samsung . . . . . . . . . . . . . . . . . . . . . . . . .1136

Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . .0666

Star Choice . . . . . . . . . . . . . . . . . . . . . . .0896

Toshiba . . . . . . . . . . . . . . . . . . . . .0776, 0817

Uniden . . . . . . . . . . . . . . . . . . . . . .0751, 0749

Zenith . . . . . . . . . . . . . . . . . . . . . . . . . . .0883

VCR

Admiral . . . . . . . . . . . . . . . . . . . . .0075, 0236

Adventura . . . . . . . . . . . . . . . . . . . . . . . .0027

Aiko . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0305

Aiwa . . . . . . . . . . . . . . . . . . . . . . .0027, 0064

Akai . . . . . . . . . . . . . . . . . . . . . . . . . . . .0068

America Action . . . . . . . . . . . . . . . . . . . .0305

American High . . . . . . . . . . . . . . . . . . . .0062

Asha . . . . . . . . . . . . . . . . . . . . . . . . . . . .0267

Audiovox . . . . . . . . . . . . . . . . . . . . . . . . .0064

Beaumark . . . . . . . . . . . . . . . . . . . . . . . .0267

Bell & Howell . . . . . . . . . . . . . . . . . . . . . .0131

Broksonic . . . . .0148, 0211, 0029, 0236, 0506

CCE . . . . . . . . . . . . . . . . . . . . . . .0099, 0305

Calix . . . . . . . . . . . . . . . . . . . . . . . . . . . .0064

Canon . . . . . . . . . . . . . . . . . . . . . . . . . . .0062

Carver . . . . . . . . . . . . . . . . . . . . . . . . . .0108

Cineral . . . . . . . . . . . . . . . . . . . . . . . . . .0305

Citizen . . . . . . . . . . . . . . . . . . . . . .0305, 0064

Colt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0099

Craig . . . . . . . . .0064, 0099, 0074, 0267, 0298

Curtis Mathes . . . . . . .0062, 0068, 0087, 0189

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0787

Cybernex . . . . . . . . . . . . . . . . . . . . . . . . .0267

Daewoo . . . . . . . . . . . . . . . . . . . . .0305, 0072

Denon . . . . . . . . . . . . . . . . . . . . . . . . . . .0069

Dynatech . . . . . . . . . . . . . . . . . . . . . . . . .0027

Electrohome . . . . . . . . . . . . . . . . . . . . . .0064

Electrophonic . . . . . . . . . . . . . . . . . . . . . .0064

Emerex . . . . . . . . . . . . . . . . . . . . . . . . . .0059

Emerson . . . . . . . . . .0211, 0029, 0236, 0305,

. . . . . . . . . . . . . . . . .0148, 0506, 0027, 0064,

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0070

Fisher . . . . . . . . . . . . . . . . . . . . . .0074, 0131

Fuji . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0062

Funai . . . . . . . . . . . . . . . . . . . . . . . . . . . .0027

GE . . . . . . . . . . . . . . .0062, 0087, 0075, 0267,

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0787

Garrard . . . . . . . . . . . . . . . . . . . . . . . . . .0027

Go Video . . . . . . . . . . . . . . . . . . . .0459, 0553

GoldStar . . . . . . . . . . . . . . . . . . . .0064, 0065

Gradiente . . . . . . . . . . . . . . . . . . . . . . . .0027

HI-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . .0074

Harley Davidson . . . . . . . . . . . . . . . . . . .0027

Harman/Kardon . . . . . . . . . . . . . . .0065, 0108

Harwood . . . . . . . . . . . . . . . . . . . . . . . . .0099

Hitachi . . . . . . . . . . . . . . . . .0069, 0027, 0068

Hughes Network Systems . . . . . . . . . . . .0069

JVC . . . . . . . . . . . . . . . . . . . . . . . .0094, 0068

Jensen . . . . . . . . . . . . . . . . . . . . . . . . . .0068

KEC . . . . . . . . . . . . . . . . . . . . . . . .0064, 0305

KLH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0099

Kenwood . . . . . . . . . . . . . . .0068, 0094, 0065

Kodak . . . . . . . . . . . . . . . . . . . . . .0062, 0064

LXI . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0064

Lloyd's . . . . . . . . . . . . . . . . . . . . . . . . . . .0027

Logik . . . . . . . . . . . . . . . . . . . . . . . . . . . .0099

MEI . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0062

MGA . . . . . . . . . . . . . . . . . . . . . . .0070, 0267

MGN Technology . . . . . . . . . . . . . . . . . . .0267

MTC . . . . . . . . . . . . . . . . . . . . . . .0027, 0267

Magnasonic . . . . . . . . . . . . . . . . . . . . . . .0305

Magnavox . . . . .0062, 0108, 0027, 0066, 0176