Philips 32PHD5813, 43PFD5813 User Manual

Register your product and get support at
www.philips.com/TVsupport
5813 series
User Manual
32PHD5813
43PFD5813

Contents

1 Get Support 3
1.2 TV Help and User Manual 3
1.3 On-line Help and User Manual 3
1.4 Consumer Care / Repair 3
2 Software 4
2.1 Update Software 4
2.2 Software Version 4
3 Quick Guide 5
3.1 Remote Control 5
3.2 IR sensor 6
3.3 Joysticker - Local Control 6
4 Setting Up 7
4.1 Read Safety 7
4.2 TV Placement 7
4.3 Turn on TV 7
5 Connections 9
5.1 Connectivity guide 9
5.2 Antenna 9
5.3 Video Device 9
5.4 Audio Device 10
5.5 Mobile Device 10
5.6 Other Device 12
6 Switch Source 14
6.1 Source List 14
6.2 Rename Device 14
7 Channels 15
7.1 About Channels and Switch Channels 15
7.2 Install Channel 15
7.3 Channel List 17
7.4 Favorite Channels 18
7.5 Closed Caption (CC) and Language 18
8 TV guide 20
8.1 What You Need 20
8.2 Using the TV Guide 20
9 Recording and Pause TV 22
9.1 Recording 22
9.2 Pause TV 22
10 Videos, Photos and Music 24
10.1 From a USB Connection 24
10.2 Photos 24
10.3 Videos 24
10.4 Music 25
11 Open TV Setting Menus 26
11.1 Home Menu Overview 26
11.2 Frequent settings and All settings 26
11.3 All Settings 26
12 Network 33
12.1 Home Network 33
12.2 Connect to Network 33
12.3 Network settings 34
12.4 Interactive TV settings 35
13 Smart TV 36
13.1 Setup Smart TV 36
13.2 Smart TV Start Page 36
13.3 App Gallery 36
14 Netflix 37 15 Environmental 38
15.1 Energy Label 38
15.2 End of Use 38
16 Specifications 39
16.1 Power 39
16.2 Reception 39
16.3 Display Resolution 39
16.4 Supported Input Resolution - Video 39
16.5 Supported Input Resolution - Computer 39
16.6 Sound 39
16.7 Multimedia 39
16.8 Connectivity 40
17 Troubleshooting 41
17.1 Tips 41
17.2 Switch On 41
17.3 Remote Control 41
17.4 Channels 41
17.5 Picture 42
17.6 Sound 43
17.7 HDMI 43
17.8 USB 43
17.9 Wi-Fi and Internet 43
17.10 Wrong Menu Language 43
18 Safety and Care 45
18.1 Safety 45
18.2 Screen Care 46
19 Terms of Use 47 20 Copyrights 48
20.1 MHL 48
20.2 HDMI 48
20.3 Dolby Audio 48
20.4 DTS HD 48
20.5 Wi-Fi Alliance 48
20.6 Other Trademarks 48
21 Open Source 49
21.1 Open Source Software 49
21.2 Open Source License 49
22 Disclaimer regarding services and/or software offered by third parties 53
Index 54
2
1
1.3
Get Support
1.1
Identify and Register your TV
Identify your TV - TV model number and serial number
You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.
Register your TV
Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases.
Go to www.philips.com/TVsupport
On-line Help and User Manual
To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number.
Go to www.philips.com/TVsupport. On the support site you can find your country's
telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our collaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer.
For more TV troubleshooting and frequently asked questions (FAQs)...
Go to http://philips-tvconsumercare.kxondemand.com/
portal/en/ModelSelect
1.2
TV Help and User Manual
Settings > Help You can use the Help function to diagnose and get
more information about your TV.
How to - You can see instructions on how to
install channels, sort channels, update TV software, connect external devices and use Smart functions on your TV.
Check the TV - You can check if the picture and sound are working fine while playing a short video clip.
Check the Network - Check the Network Connection.
Update software - Check available software updates.
User manual - Read the user manual for TV information.
Troubleshooting - Find a solution for frequently asked questions.
Factory settings - Reset all settings to factory settings.
Reinstall TV - Reinstall and redo the complete TV installation.
Contact info - Shows the telephone number or web address for your country or region.
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions more easily, you can download the TV Help in PDF format to read on your smartphone, tablet or computer. Alternatively, you can print the relevant Help page from your computer. To download the Help (user manual) go to www.philips.com/TVsupport
1.4
Consumer Care / Repair
For support and repair, call the Consumer Care hotline in your country. Our service engineers will take care of a repair, if necessary.
Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/TVsupport and select your country if needed.
TV model number and serial number
You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.
Warning
Do not attempt to repair the TV yourself. This may cause severe injury, irreparable damage to your TV or void your warranty.
3
2
Software
2.1
Update Software
Search for Updates
Update from Internet
(Home) > Settings > Update software > Search for updates > Internet
Look for a software update yourself.
back on again. Please wait.
Do not . . .
• use the remote control
• remove the USB memory device from the TV
• press twice
• press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait.
The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device.
• If the TV is connected to the Internet, you may receive a message to update the TV software. You need a high-speed (broadband) Internet connection. If you receive this message, we recommend you to carry out the update.
• During the software update, there is no picture and the TV will switch off and on again. This might happen several times. The update can take a few minutes.
• Wait until the TV picture comes back up. Do not press the power switch on the TV or on the remote control during the software update.
Update from USB
(Home) > Settings > Update software > Search for updates > USB
• You need a computer with a high-speed Internet connection and a USB memory device to upload the software on the TV.
• Use a USB memory device with 512MB free space. Make sure that write protection is switched off.
1 - Start the update on TV
Select Update software > Search for updates > USB, then press OK. 2 - Identify the TV
Insert the USB memory into one of the USB connections of the TV. Select Start and press OK. An identification file is written on the USB memory device.
3 - Download the TV software
- Insert the USB memory into your computer.
- On the USB memory device, locate the file update.html and double click it.
- Click on Send ID.
- If new software is available, download the .zip file.
- After the download, unzip the file and copy the file autorun.upg onto the USB memory device.
- Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again. The update starts automatically. The TV switches itself off for 10 seconds and then
Local Updates
(Home) > Settings > Update software > Search for updates > USB > Local updates.
For dealers and expert users.
2.2
Software Version
(Home) > Settings > Update software > Current software Info
To view the current TV software version.
4
3
Quick Guide
3.1
Remote Control
Batteries and Cleaning
Replace batteries
If the TV does not react on a key press on the remote control, the batteries might be empty.
To replace the batteries, open the battery compartment on the back of the remote control.
1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2 Alkaline, type AAA-R03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly. 3 - Reposition the battery door and slide it back until it clicks.
• Remove the batteries if you are not using the remote control for a long time.
• Safely dispose of your old batteries according to the end of use directions.
Cleaning
• Fast forward , to go fast forward
• Record , to start recording 3 - Media browser
To open or close the Media browser menu. 4 - TV GUIDE
To open or close the TV Guide. 5 - Search
To open the Smart TV searches page. 6 - Settings
To open the Quick settings menu. 7 - SOURCES
To open the Sources menu. 8 - LIST
To open or close the channel list.
Middle
Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control.
Key Overview
Top
1 - Standby / On
To switch the TV on or back to Standby. 2 - Playback and Record
• Play , to playback.
• Pause , to pause playback
• Stop , to stop playback
• Rewind , to rewind
1 - Home To open the Home menu.
2 - SMART TV To open the Smart TV start page.
3 - Color keys Direct selection of options. Blue key , opens Help.
4 - INFO To open or close programme info.
5 - BACK To close a menu without changing a setting.
6 - EXIT To switch back to watch TV.
7 - OPTIONS To open or close the Options Menu.
8 - OK key To confirm a selection or setting. To open the channel list while watching TV.
9 - Arrow / navigation keys To navigate up, down, left or right.
10 - FORMAT To open or close the Picture Format menu.
5
Bottom
1 -
To open the Netflix App directly. With the TV switched on or from standby.
2 - Volume To adjust the volume level.
3 - Number keys To select a channel directly.
4 - CC (Closed captions) To switch Closed captions on, off or to show automatically.
5 - Channel To switch to the next or previous channel in the channel list. To start the next or previous chapter on a disc.
3.3
Joysticker - Local Control
Keys on TV If you lost the remote control or its batteries are
empty, you can still do some basic TV operations. To open the basic menu…
1 - With the TV switched on, press the joystick key on the back of the TV to bring up the basic menu. 2 - Press left or right to select Volume, Channel, or Sources. Select Demo to start a demo movie. 3 - Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go through the list of sources, including the tuner selection.
The menu will disappear automatically.
6 - Mute To mute the sound or to restore it.
7 - (Dot) To enter digital sub-channels.
3.2
IR sensor
The TV can receive commands from a remote control that uses infrared (IR) to send commands. If you use this kind of remote control, always point it at the infrared sensor on the front of the TV.
Warning
Do not put any objects in front of IR sensor of the TV as it may block the IR signal.
6
4
Setting Up
4.1
Read Safety
Read the safety instructions first before you use the TV.
To read the instructions, in Help > User manual, press the color key Keywords and look up Safety and Care.
4.2
TV Placement
Tips on Placement
• Position the TV where light does not shine directly on the screen.
• Position the TV up to 6 inches away from the wall.
• The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the center of the screen.
• 32PHx5813
VESA MIS-F 100, M6 (Minimum 12 mm, Maximum 16 mm)
• 43PFx5813
VESA MIS-F 200x200, M6 (Minimum 12 mm, Maximum 16 mm)
Caution
Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
4.3
Turn on TV
Connect Power Cable
TV Stand
You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com/TVsupport.
Use the model number of the TV to look for the Quick Start Guide to download.
Wall Mounting
Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .
• Insert the power cable into the POWER connector on the back of the TV.
• Make sure the power cable is securely inserted in the connector.
• Make sure that the power plug, in the wall socket, is accessible at all times.
• When you unplug the power cable, always pull the plug, never pull the cable.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.
7
On or Standby
Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
Switch On
• Press the small joystick key on the back of the TV.
Switch to standby
To switch the TV to standby, press on the remote control. You can also press the small joystick key on the back of the TV.
In standby mode, the TV is still connected to the mains power but consumes very little energy.
To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.
8
5
Connections
5.1
Connectivity guide
Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.
When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu.
5.2
Antenna
Insert the antenna plug firmly into the Antenna socket at the back of the TV.
You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.
Copy protection
HDMI ports support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu­ray Disc. Also referred to as DRM (Digital Rights Management).
Component
Y Pb Pr - Component Video is a high quality
connection. The YPbPr connection can be used for High Definition
(HD) TV signals. Next to the Y, Pb and Pr signals, add the Audio Left and Right signals for sound.
5.3
Video Device
HDMI
An HDMI connection has the best picture and sound quality.
Match the YPbPr (green, blue, red) connector colors with the cable plugs when you connect. Use an Audio L/R cinch cable if your device also has sound.
For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m.
9
Composite
Digital Audio Out - Optical
CVBS - Composite Video is a standard time quality
connection. Next to the CVBS signal adds the Audio Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
5.4
Audio Out - Optical is a high quality sound connection.
This optical connection can carry 5.1 audio channels. If your device, typically a Home Theater System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.
Audio Device
HDMI ARC
Only HDMI 2 on the TV has HDMI ARC (Audio Return Channel).
If the device, typically a Home Theater System (HTS), also has the HDMI ARC connection, connect it to HDMI 2 connection on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.
Headphones
You can connect a set of headphones to the connection on the side of the TV. The connection is a mini-jack 3.5mm.
5.5
Mobile Device
Wi-Fi Direct / Miracast
About Wi-Fi Miracast
You can view your photos or play your music and videos from a mobile device on your TV with Wi-Fi Miracast™. The mobile device and the TV should be within range, which usually means being in the same room.
Check if your mobile device is ready for Miracast.
10
Your TV is a Wi-Fi CERTIFIED Miracast™ device. With Miracast™, you can watch and share the screen of your smartphone, tablet or computer on your TV screen wirelessly. You can stream videos (audio and video), and share photos or anything else that's on the device screen. No need to connect the device to your home network. Both the TV and the device must be Wi-Fi CERTIFIED Miracast™ devices and have Miracast switched on.
Miracast on this TV is subject to the HDCP protocol and cannot display copy-protected premium content sent by a device. The maximum video resolution supported is 720p for 2.4GHz Wi-Fi or 1080p for 5GHz Wi-Fi.
For more information on Wi-Fi CERTIFIED Miracast™ go to www.wi-fi.org
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. Wi-Fi CERTIFIED Miracast™, Miracast™ are trademarks of the Wi-Fi Alliance.
Using Miracast Switch on Miracast
Press  SOURCES > Miracast Share a Screen on TV
1 - Activate Miracast (Screen mirroring) on your mobile device. 2 - On your mobile device, select the TV. (This TV will be displayed as TV model name) 3 - Select the TV name on your mobile device, after connection, you can enjoy using Miracast.
Stop Sharing
You can stop sharing a screen from the TV or the mobile device.
Reset Wi-Fi Miracast connection
All previously connected devices are stored in the Wi­Fi Miracast list of connections.
To clear all connected Miracast devices…
(Home) > Settings > All settings > Network > Reset Wi-Fi Miracast connection.
Screen Delay
The normal delay when sharing a screen with Miracast is about 1 second. The delay might be longer if you are using older devices with less processing power.
MHL
This TV is MHL™ compliant. If your mobile device is also MHL compliant, you can
connect your mobile device with a MHL cable to the TV. With the MHL cable connected you can share what's on your mobile device on the TV screen. Your mobile device charges its battery at the same time. The MHL connection is ideal for watching movies or playing games from your mobile device on TV for a longer time.
Charging
With the MHL cable connected, your device will charge while the TV is switched on (not in standby).
MHL Cable
You need a passive MHL cable (HDMI to Micro USB) to connect your mobile device to the TV. You might need an extra adapter to connect to your mobile device. To connect the MHL cable to the TV use the HDMI 1 MHL connection.
From the device
With the application you use to start Miracast, you can disconnect and stop watching the screen of the device on TV. The TV will switch back to the last selected programme.
From the TV
To stop watching the screen of the device on TV, you can . . .
• press EXIT to watch a TV broadcast
• press (Home) to start another activity on TV
• press SOURCES to open the Sources menu and select a connected device.
MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC.
11
Apps - Philips TV Remote App
With the TV Remote App, you master your media around you. Send photos, music or videos to your big TV screen or watch any of your TV channels live on your tablet or phone. Look up what you want to watch on the TV Guide and watch it on your phone or TV. With the TV Remote App you can use your phone as a remote control*.
Download the Philips TV Remote App from your favorite app store today.
The Philips TV Remote App is available for iOS and Android and is free of charge.
* When use your phone as a remote control, TV cannot be switched on or off via your phone.
Hard Drive with a minimum of 4GB of disk space.
To Record
To pause and record a broadcast, you need a minimum of 250GB disk space. If you want to record a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on your TV before you install the USB Hard Drive.
1 - Connect the USB Hard Drive to one of the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting.
2 - Switch on the USB Hard Drive and the TV. 3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the formatting.
Follow the instructions on screen.
5.6
Other Device
USB Flash Drive
You can view photos or play your music and videos from a connected USB flash drive. Insert a USB flash drive in one of the USB connections on the TV while the TV is switched on.
The TV detects the flash drive and opens a list showing its content. If the contents list does not appear automatically, press SOURCES and select USB.
For more information on watching or playing content from a USB flash drive, in Help, press the color key Keywords and look up Photos, Videos and Music.
When the USB Hard Drive is formatted, leave it connected permanently.
Warning
The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.
To read the instructions, in Help, press the color key Keywords and look up USB Hard Drive.
Formatting
Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive. If you want to record broadcasts with TV Guide data from the Internet, you must setup the Internet connection first before you install the USB Hard Drive.
USB Hard Drive
Installation
If you connect a USB Hard Drive, you can pause or record a TV broadcast. The TV broadcast must be a digital broadcast (ISDB broadcast or similar).
Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive.
To Pause
To pause a broadcast, you need a USB-compatible
Warning
The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.
To format a USB Hard Drive… 1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect another USB device to the other USB ports when
12
formatting.
2 - Switch on the USB Hard Drive and the TV. 3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the formatting. Follow the instructions on screen. 4 - When the USB Hard Drive is formatted, leave it connected permanently.
13
6
Switch Source
6.1
Source List
• To open the sources menu, press SOURCES .
• To switch to a connected device, select the device with the arrows (left) or (right) and press OK.
• To close the source menu without switching to a device, press SOURCES again.
6.2
Rename Device
(Home) > Settings > All settings > General settings > Input sources
• To edit the input sources names from the source list.
1 - Select one of the device and press OK. 2 - Select Edit and press OK. 3 - Follow the on screen instructions to rename the
device name.
14
7
Channels
7.1
About Channels and Switch Channels
To watch TV channels
• Press . The TV tunes to the TV channel you last watched.
• Press (Home) > Watch TV > Channels and press OK.
• Press + or - to switch channels.
• If you know the channel number, type in the number with the number keys. Press OK after you entered the number to switch channels.
• To switch back to the previously tuned channel, press BACK .
To switch to a channel from a channel list
• While watching a TV channel, press LIST to open the channel lists.
• The channel list can have several pages with channels. To view the next or previous page, press + or -.
• To close the channel lists without switching channels, press LIST again.
Channel icons
After an Automatic channel update of the channel list, newly found channels are marked with a (star). If you lock a channel, it will be marked with a (lock).
Radio channels
If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel.
1 - Select Start now and press OK. 2 - Select Update channels to only add new digital
channels. 3 - Select Start and press OK to update channels. This can take a few minutes.
Quick reinstall (Home) > Settings > Install
Channels > Antenna/Cable Installation > Search for channels
1 - Select Start now and press OK. 2 - Select Quick reinstall to install all channels again
with default settings. 3 - Select Start and press OK to update channels. This can take a few minutes.
Advanced reinstall (Home) > Settings > Install
Channels > Antenna/Cable Installation > Search for channels
1 - Select Start now and press OK. 2 - Select Advanced reinstall to do a full re-
installation which takes you through each step. 3 - Select Start and press OK to update channels. This can take a few minutes.
Service Navigation
(Home) > Settings > Install Channels > Antenna/Cable Installation > Service navigation
• If the Service navigation is set to On, You can browse the primary and secondary channels by pressing channel   and  .
• If the Service navigation is set to Off, you can only browse the primary channels using channel   and  .
This TV can receive digital television standard time DVB. TV may not work properly with some operators of digital television , non-compliance with requirements of the standard in full.
7.2
Install Channel
Antenna/Cable Installation
Search for Channels Update channels
(Home) > Settings > Install Channels > Antenna/Cable Installation > Search for channels
Digital: Reception Test
(Home) > Settings > Install Channels > Antenna/Cable Installation > Digital: reception test
The digital frequency is shown for this channel. If the reception is poor, you can reposition your antenna. To check the signal quality of this frequency again, select Search and press OK. To enter a specific digital frequency yourself, use the remote control digit keys. Alternatively, select the frequency, position the arrows on a number with and and change the number with and . To check the frequency, select Search and press OK.
15
Antenna Connection
Upload a Channel List
(Home) > Settings > Install Channels > Antenna/Cable Installation > Antenna Connection
1 - Select Antenna or Cable, and press OK. 2 - Select Start and press OK. This can take a few
minutes.
Channel Logos
(Home) > Settings > All settings > Channels > Channel logos
In some countries, the TV can show the channel logos. If you do not want these logos to appear, you can switch them off.
Channel List copy
Introduction
Channel list copy is intended for dealers and expert
users. With Channel list copy, you can copy the channels
installed on one TV onto another Philips TV of the same range. With Channel list copy, you avoid the time-consuming channel search by uploading a predefined channel list on a TV. Use a USB flash drive of minimum 1 GB.
Conditions
• Both TVs must be from the same year range.
• Both TVs have the same hardware type. Check the hardware type on the TV type plate on the back of the TV. Typically noted as Q . . . LA
• Both TVs have compatible software versions.
Copy a Channel List, Check Channel List Version
Copy a channel list to USB flash drive
(Home) > Settings > All settings > Channels > Expert mode settings > Channel list
copy > Copy to USB
To not Installed TVs
Depending on whether your TV is already installed or not, you must use a different method to upload a channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and select language and country. You can skip the channel search. Finish the installation. 2 - Plug in the USB flash drive that holds the channel list of the other TV. 3 - To start the channel list upload, press (Home) > Settings > All settings > Channels > Expert mode settings > Channel List Copy > Copy to TV and press OK. Enter your PIN code if necessary. 4 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB flash drive.
To Installed TVs
Depending on whether your TV is already installed or not, you must use a different method to upload a channel list.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this setting, see chapter Re-install channels. Start this procedure until you reach the country setting. Press BACK to cancel the installation.) If the country is correct continue with step 2. If the country is not correct, you need to start a reinstallation. See chapter Re-install channels and start the installation. Select the correct country and skip the channels search. Finish the installation. When done, continue with step 2. 2 - Plug in the USB flash drive that holds the channel list of the other TV. 3 - To start the channel list upload, press (Home) > Settings > All
settings > Channels > Expert mode settings > Channel List Copy > Copy to TV and
press OK. Enter your PIN code if necessary. 4 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB flash drive.
Check channel list version (Home) > Settings > All
settings > Channels > Expert mode settings > Channel list copy > Current version
Channel Options
Open Options
While watching a channel, you can set some options. Depending on the type of channel you are watching
or depending on the TV settings you made, some options are available.
16
To open the options menu…
1 - While watching a channel, press OPTIONS. 2 - Press OPTIONS again to close.
7.3
Channel List
Open Channel List
Audio Language
If none of the preferred audio languages are available, you can select another audio language if available. If no audio languages are available, you cannot select this option.
To read more information, in Help, press the color key Keywords and look up Audio Language.
Closed Caption
Switch Closed Caption On or Off with this options. Select On During Mute to show closed captions only when the sound is muted with .
Caption Service
Select the correct type of closed caption services. For more information, in Help, press Keywords and look up Closed Caption.
To open the current channel list…
1 - Press , to switch to TV. 2 - Press LIST to open the current channel list. 3 - Press OPTIONS > Select channel list, and
select one channel list you want to watch.
4 - Press  LIST again to close the channel list.
Channel List Options
Open Option Menu
To open the channel list option menu...
• Press , to switch to TV.
• Press LIST to open the current channel list.
• Press OPTIONS , and select one of options.
• Press LIST again to close the channel list.
Select Channel Filter
LIST > OPTIONS > Digital
Dual I-II
This option is available if an audio signal contains two audio languages, but one or both languages has no language indication.
Status
Select Status to view technical information on the channel or a connected device you are watching.
Universal Access
Only available when Universal access is set to On. (Home) > Settings > All settings > Universal
access > Universal access > On.
To read more information, in Help, press the color key Keywords and look up Universal Access.
Select one of channel combinations showing in the channel list.
Create or Edit Favorites Channel List
LIST > OPTIONS > Create favorites list Select a channel then press OK to add in a favorites
channel list, once completed, press Done. LIST > OPTIONS > Edit favorites Select a channel then press OK to add in or remove
from a favorites channel list, once completed, press
Done.
Select Channel Range
LIST > OPTIONS > Select channel range Select a range of channels in a favorites channel list,
once completed, press OK.
Select Channel List
LIST > OPTIONS > Select channel list Select a range of channels in a favorites channel list,
once completed, press OK.
17
Loading...
+ 39 hidden pages