Philips 37MD359B User Manual

User Manual Manuel de l’utilisateur Guía del usuario

37MD359B

LCD TV/DVD

English

1-866-341-3738

Quick Use Guide Inside!

HIGH-DEFINITION TELEVISION

1-866-341-3738

Guide d’usage Rapide Incluse! Guía de Uso Rápido Incluida!

1-866-341-3738

Français

Español

MODEL NUMBER SERIAL NUMBER

Return your Product Registration Card or register online at

www.magnavox.com/support today to get the very most from your purchase.

Registering your model with MAGNAVOX makes you eligible for all of the valuable benets listed below, so don’t miss out. Complete and return your Product Registration Card at once,

or register online at www.magnavox.com/support to ensure:

*Proof of Purchase

Returning the enclosed card guarantees that your date of purchase will be on le, so no additional paperwork will be required from you to obtain warranty service.

Congratulations on your purchase, and welcome to the “family!”

Dear MAGNAVOX product owner:

Thank you for your condence in MAGNAVOX. You’ve selected one of the best-built, best-backed products available today. We’ll do everything in our power to keep you happy with your purchase for many years to come.

As a member of the MAGNAVOX “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. What’s more, your purchase guarantees you’ll receive all the information and special oers for which you qualify, plus easy access to accessories from our convenient home shopping network.

Most importantly, you can count on our uncompromising commitment to your total satisfaction.

All of this is our way of saying welcome - and thanks for investing in a MAGNAVOX product.

*Product Safety Notication

By registering your product, you’ll receive notication directly from the manufacturer - in the rare case of a product recall or safety defect.

Know these safety symbols

This “bolt of lightning” indicates

uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The “exclamation point” calls attention to

features for which you should read the en-

closed literature closely to prevent operating

and maintenance problems.

WARNING : To reduce the risk of re or electric shock, this apparatus should not be exposed to rain or moisture and objects lled with liquids, such as vases, should not be placed on this apparatus.

CAUTION : To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION : Pour éviter les choc électriques, introduire la lame la plus large de la che dans la borne correspondante de la prise et pousser jusqu’au fond.

*Additional Benets

Registering your product guarantees that you’ll receive all of the privileges to which you’re entitled, including special money-saving oers.

P.S. To get the most from your MAGNAVOX purchase, be sure to complete and return your Product Registration Card at once or register online at:

www.magnavox.com/support

Visit our World Wide Web Site at www.magnavox.com/support

For Customer Use

Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference.

Model No._____________________________ Serial No. _____________________________

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

Read these instructions.

1. Keep these instructions.

2. Heed all warnings.

3. Follow all instructions.

4. Do not use this apparatus near water.

5. Clean only with a dry cloth.

Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat. Do not defeat the safety purpose of the polarized or

9. grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and third grounding prong. The wide blade or third prong are provided for your safety. When the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched

10. particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specied by the

11. manufacturer.

13.

14.

15.

Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the appara-

tus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Damage Requiring Service - The appliance should be serviced by qualied service personnel when: A. The power supply cord or the plug has been damaged; B. Objects have fallen, or liquid has been spilled into the appliance; C. The appliance has been exposed to rain D. The appliance does not appear to operate normally or exhibits a marked change in performance; E. The appliance has been dropped, or the enclosure damaged.

16.

Tilt/Stability - All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinet design.

• Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet which could ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.

17.

Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

18.

Power Lines - An outdoor antenna should be located away from power lines.

19.

Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure below.

20.

Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

21.

Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit:

• Install all batteries correctly, with + and - aligned as marked on the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.).

• Remove batteries when the unit is not used for a long time.

Note to the CATV system installer : This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, species that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Example of Antenna Grounding as per NEC - National Electric Code

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

NTRODUCTION

 Precaution

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.

FCC WARNING

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the apparatus and receiver.

3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

DECLARATION OF CONFORMITY

Trade Name: MAGNAVOX Responsible Party: FUNAI CORPORATION, INC. Model: 37MD359B Address: 201 Route 17 North Suite No. 903 Rutherford, New Jersey 07070 U.S.A. Telephone Number: 201-727-4560

This Class B digital apparatus complies with Canadian ICES-003.

This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 3.2 inches (8cm) or more around this apparatus.

Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Like all LCD products, this set contains a lamp with Mercury, please dispose of according

to all Local, State and Federal laws. For the disposal or recycling information, contact:

www.mygreenelectronics.com or www.eiae.org

WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the instructions.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION:INSIDE, NEAR THE DECK MECHANISM.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

• Do not handle the AC power cord with wet hands.

• Do not remove this unit cabinet. Touching parts inside the cabinet could result in electric shock and/or damage to this unit. For service and adjustment inside the cabinet, call a qualified dealer or an authorized service center.

• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.

• Do not put your fingers or objects into the unit.

LOCATION AND HANDLING

• The openings should not be blocked by placing the unit on a bed, sofa, carpet, rug, or other similar surface.

• Do not install the unit near or over a radiator or heat register.

• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

• Avoid a place with drastic temperature changes.

• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit. Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit.

• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

DEW CONDENSATION WARNING

• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few hours until its inside gets dry.

- The unit is moved from a cold place to a warm place.

- Under conditions of high humidity.

- After heating a cold room.

NOTE ABOUT RECYCLING

• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

• Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

WHEN CARRYING THIS UNIT

• At least two people are required when carrying this unit.

• Make sure to hold the upper and bottom frames of the TV firmly as illustrated.

INTRODUCTION PREPARATION

WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

 Trademark Information

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

• Products that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.

•

is a trademark of DVD Format/Logo Licensing Corporation.

 Symbols Used in this Manual

The following is the description for the symbols used in this manual. Description refers to:

TV FUNCTIONS DVD FUNCTIONS

: Analog TV operation

DTV

: Digital TV operation

• If neither symbol appears under the function heading, operation is applicable to both.

DVD

: Playback of DVD-video

: Playback of audio CD

• If neither symbol appears under the function heading, operation is applicable to both.

INFORMATION

NTRODUCTION

AAA

front side

screw holes

➂

 Supplied Accessories

user manual (1EMN25079)

• If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual.

quick start guide (1EMN25081)

remote control (NF801UD)

batteries (AAA x 2)

registration card (1EMN24699)

screw kit for attaching the stand (1ESA20208)

AC power cord (WAV0162LW001)

 Attaching the Stand

You must attach the stand to the unit to have it as a table top unit. Be sure the front and rear of the stand match the proper direction.

Spread a thick and soft cloth over a

table as shown below. Place the main unit face down onto it. Make sure not to damage the screen. At least two people are required at this step.

Align the 2 stand hooks with the two

hooks under the bottom of the main unit (shown by arrow the stand in the direction as shown by arrow mounting holes are aligned.

until it stops and the 3

➁

), then slide

➀

Drive Phillips pan screws in the 3

threaded holes at the bottom of the stand until they are tight.

➁

front side

➀

To remove the stand from this unit

Unscrew the Phillips pan screws indicated by above “➂”screw holes. After the screws are removed pull the stand up toward the rear of the unit. Be careful not to drop the stand when you remove it.

Note:

• When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall,

• Make sure to use a table which can support the weight of this unit and is larger than this unit.

• Make sure the table is in a stable location.

resulting in injuries as well as damage to the unit.

 Features

INTRODUCTION PREPARATION

TV DVD

• DTV/TV/CATV

- You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable subscribers can access their cable TV channels.

• Information Display (DTV only)

- You can display the title, contents and other information of the current DTV program on the TV screen.

• Autoprogram

- This unit automatically scans and memorizes channels available in your area, eliminating difficult setup procedures.

• Child Lock

- This feature allows you to block children’s access to inappropriate programs.

• Closed Caption Decoder

- Built-in closed caption decoder displays text for closed caption supported programs.

• MTS/SAP Tuner

- Audio can be selected from the remote control.

• Auto Shut Off Function

- If there is no signal input from the antenna terminal and no operation for 15 minutes, the unit will turn off automatically.

• Sleep Timer

- This feature will automatically turn off the power of the unit at a specific time.

• Choices for On-screen Language

- Select your on-screen language: English, Spanish or French.

• Stereo Sound Function

• PLL Frequency Synthesized Tuning

- Provides free and easy channel selection and lets you tune directly to any channel using the number buttons on the remote control.

• Various Adjustment for Picture and Sound

- Customizes image quality to suitable for your room and sets the sound as your preference.

• HDMI Input

- When using HDMI1 Input, you can enjoy this unit as a PC monitor if your PC has DVI output terminal.

• Component Video Input

• S-Video Input

• AV Input

• Digital Audio Output

• Analog Audio Output

• Dolby Digital Sound

- Enjoy Dolby Digital multi-channel surround sound when you connect the unit to your Dolby Digital decoder.

• Still / Fast / Slow / Step Playback

- Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.

• DVD Menus in a Desired Language

- You can display DVD menus in a desired language, if available on a DVD-video.

• Auto Power Off

- If there is no operation for 20 minutes, the unit will turn itself off automatically.

• Parental Lock

- Block the viewing of DVD-video unsuitable for children.

• Resume Playback

- Lets you resume playback from the point at which playback was stopped.

• Bit Rate Indication

• DRC (dynamic range control)

- You can control the range of sound volume.

Accessing from [MODE] button

During playback

• Subtitles in a Desired Language

- You can select a desired language for displaying subtitle, if that language is available on a DVD-video.

• Selecting a Camera Angle

- You can select the desired camera angle, if a DVD contains sequences recorded from different angles.

• Zoom

- Allows you to enlarge the size of picture image.

• Black Level Adjustment

• Virtual Surround

• Search

- chapter search / title search / track search / time search

• Marker

- The part on the disc designated by user can be called back.

• Repeat

- chapter / title / track / all / A-B

Accessing from [MODE] button

In Stop mode

• Program Playback for audio CD

- You can program the order of tracks to play them back in designated order.

• Random Playback for audio CD

- This unit can shuffle the order of tracks to play them back in randomly.

WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

INFORMATION

Accessing from [SAP/AUDIO] button

During playback

• Choices for Audio Language and Stereo Sound Function

- Select your desired languages or stereo sound function when different options are available on your disc.

NTRODUCTION

 Contents

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . .3

INTRODUCTION

Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Trademark Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Remote Control Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Installing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

PREPARATION

Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Connection to Cable Receiver or Satellite Box . . . . . . . . . .12

External Device Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Plug In the AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

TV Functions

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

WATCHING TV

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Still Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Switching Each Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Switching Audio Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

TV Screen Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

TV Screen Display Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

OPTIONAL SETTING

Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Autoprogram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Add Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Antenna Confirmation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Picture Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Sound Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

PC Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Energy Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Current Software Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

DVD Functions

OPERATING DVD

Playable Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Unplayable Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Paused and Step-by-step Playback . . . . . . . . . . . . . . . . . . . . .38

Fast Forward / Fast Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Search Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Repeat Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Repeat A-B Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

On-screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

DVD SETTING

DVD Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

DVD Audio Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Parental Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Reset to the Default Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

TROUBLESHOOTING

FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

INFORMATION

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Cable Channel Designations . . . . . . . . . . . . . . . . . . . . . . . . . . .55

General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Electrical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Other Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

INTRODUCTION PREPARATION

 Control Panel

VOLUME

CHANNEL

5 16 4 3 27

POWER

 Ter mi na ls

Note:

service terminal (service use only)

• Use this terminal only when a software update is necessary.

• User should not connect any devices to the service terminal such as digital camera, keyboard, mouse, etc. (because these will not work).

• The software update is, in most cases, handled by an authorized service person or in some circumstances the user may be asked to do the software upgrade themselves.

1. yy POWER (p. 17)

Press to turn the unit on and off.

2. B

(play) (p. 38)

Press to begin the disc playback.

3. C

(stop) (p. 38)

Press to stop the disc playback.

A (eject) (p. 38) Press to eject the disc.

5. CHANNEL

+ /

(p. 18 / p. 19) Press to select channels or move up ( through the main menu items.

6. MENU (p. 17 / p. 46)

9 10 11

Press to display the main menu.

+ /

7. VOLUME

(p. 18)

Press to adjust the volume or move right (

) through the main menu items.

(

8. Infrared sensor Window

Receives infrared rays transmitted from the remote control.

9. POWER ON Indicator

Lights up green when power is on.

10. STAND BY Indicator

Lights up red when power is off.

11. DVD Indicator

Lights up orange when the disc is inserted.

[Side Panel]

12. Disc Loading Slot (p. 38)

Insert the disc with the label side facing forward.

13. S-Video Input jack (p. 14)

S-Video cable connection from an external device.

14. Video Input jack (p. 15)

RCA video cable connection from an external device.

15. Audio Input jack (p. 14 / p. 15)

RCA audio cable connection from an external device.

16. HDMI 2 Input jack (p. 12 / p. 13)

HDMI connection from HDMI device.

[Rear Panel]

17. AC power Inlet (p. 16)

Connect the supplied AC power cord for a standard

AC outlet.

18. Cable Management (p. 16)

Use this holder to bundle the cables.

Component Video and Audio Input jack (p. 12 / p. 14)

19.

RCA component video cable and RCA audio cable

connection from an external device.

20. Audio Output jack (p. 15)

RCA audio cable connection for an external device.

21. Audio Input jack for HDMI 1 (p. 13 / p. 16)

RCA audio cable connection from a DVI device.

When you connect your PC that has a DVI terminal, use a stereo mini plug-RCA conversion cable as well. (For HDMI 1 Input jack only)

22. Digital Audio Output jack (p. 15)

Coaxial digital cable connection for a decoder or an audio receiver.

23. Antenna Input jack (p. 12)

coaxial cable connection for your antenna or cable

RF TV signal.

24. HDMI 1 Input jack (p. 12 / p. 13 / p. 16)

HDMI connection for HDMI or DVI device. When you connect your PC that has a DVI terminal, you can enjoy this unit as a PC monitor.

25. HDMI 3 Input jack (p. 12 / p. 13)

HDMI connection for HDMI device.

+) / down (

+) / left

)

WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

INFORMATION

NTRODUCTION

 Remote Control Function

1 2

2 3 4

5 6 7

8 9

10 11 12

16 17 18

19 2

10 22

12 23 24

1. yy (power) (p. 17)

Press to turn the unit on and off.

2. SLEEP (p. 18)

Press to activate the sleep timer.

3. SOURCE (p. 19)

Press to access connected external devices like a BD/DVD recorder.

4. SAP/AUDIO (p. 19 Digital mode (DTV)

• Press to select the audio language.

Analog mode (TV)

• Press to select the audio mode.

DVD mode

• Press to select the audio language (DVD), or

sound mode (CD).

5. MODE (p. 7)

• Press to arrange the playing order or

playback randomly (CD).

• Press to set the black level (DVD) and

the virtual surround on or off.

• Press to change the camera angle to see the

sequence being played back from different angle (DVD).

• Press to search chapter, title (DVD),

track (CD) or time.

• Press to set the marker.

• Press to repeat playback chapter, title (DVD),

track, disc (CD) repeatedly or between designated point A and B.

• Press to magnify the part of picture

(2x and 4x : DVD).

• Press to select the subtitles on a disc (DVD).

6. MENU (p. 17 / p. 46) Press to display the main menu.

7. s / B / K / L (p. 17) Press to move left / right / up / down through the items.

8. OK (p. 17) Press to decide the command of setting when the main menu is displayed.

9. BACK (p. 20) Press to return to the previous menu operation.

/ p. 44)

When using a universal remote control to operate this unit.

• Make sure the component code on your universal remote control is set to our brand. Refer to the manual accompanying your remote control for more details.

INTRODUCTION PREPARATION

AAA

10. REV E / FWD D (p. 39)

Press to begin slow forward or slow reverse playback during the pause mode (DVD) and search forward or backward through a disc.

11. PLAY B (p. 38) Press to begin the disc playback.

12. SKIP H / G (p. 40) Press to skip forward or backward chapters, titles

(DVD) or tracks (CD).

13. PREV CH (p. 18)

Press to return to the previous channel.

14. VOL

+ / - (p. 18)

Press to adjust the volume.

15. Number buttons (p. 18)

• Press to select channels.

• Press to select chapter, title (DVD), or track (CD) directly.

• (dot)

• Press to shift the subchannel from the main channel.

+10 button

• Press to select 10 or higher number of chapters.

16. FREEZE (p. 19)

TV mode

• Press to pause screen image.

17. EJECT A (p. 38)

Press to eject the disc.

18. DISC MENU (p. 38)

Press to display the menu on a disc.

19. TITLE (p. 38)

Press to display the title menu (DVD).

20. FORMAT (p. 21)

Press to select aspect ratio available for the TV screen.

21. INFO (p. 20 / p. 43) Digital mode (DTV)

• Press to display the channel information,

signal type and TV setting.

Analog mode (TV)

• Press to display the channel number,

signal type and TV setting.

External input mode

• Press to display the external input modes,

signal type and TV setting.

DVD mode

• Press to display the current status.

22. PAUSE F (p. 38) DVD mode

• Press to pause disc playback.

23. STOP C (p. 38)

Press to stop the disc playback.

24. MUTE (p. 18) Press to turn the sound on and off.

+ / - (p. 18 / p. 19)

25. CH

Press to select channels and the

external input modes.

26. CLEAR (p. 41)

• Press to clear the numbers entered incorrectly.

• Press to cancel the point A for A-B repeat.

• Press to remove the track number in program

input (CD).

WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

 Installing the Batteries

Install the batteries (AAA x 2) matching the polarity indicated inside battery compartment of the remote control.

AAA

Battery Precautions:

• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries; they can overheat and rupture.

INFORMATION

REPARATION

(red)

(blue)

(green)

(red)

(blue)

(green)

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.

Before you connect... Be sure your antenna or other device is connected properly before plugging in the AC power cord.

 Antenna Connection

Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.

e.g.)

VHF / UHF antenna

RF coaxial cable

cable TV signal

* Once connections are completed, turn on the unit and begin initial setup. Channel scanning is necessary for the unit

to memorize all available channels in your area. (Refer to “Initial Setup” on page 17.)

Note:

• If you have any question about the DTV’s antenna, visit www.antennaweb.org for further information.

• Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local electronics store for these items.

• For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna input jack before moving the unit.

• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than settop versions.

• To switch your reception source easily between antenna and cable, install an antenna selector.

• If you connect to the cable system directly, contact the CAT V installer.

rear of this unit

 Connection to Cable Receiver or Satellite Box

Use an HDMI or an RCA component video cable to connect the HDMI or the Component Video Input jack of the unit to the HDMI or the component video output jack of the cable receiver / satellite box. If you connect to the unit’s Component Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Component Video connector.

COMPONENT VIDEO OUT

(green)

HDMI cable

Pr/CrPb/CbY

(red)

(blue)

(red)

(blue)

RCA component video cable and RCA audio cable

(green)

(blue)

(blue) (red)

(red)

side or rear of this unit

e.g.)

satellite dish

cable TV signal

including PPV

RF coaxial cable

ANT IN

HDMI OUT

AUDIO OUT

STEREO PCM

cable receiver / satellite box

* You can also connect this unit to the cable receiver or satellite box other than the HDMI or the component video

output jack because they might have different output jacks.

* Required cables and connecting methods of the cable receiver / satellite box, or the availability channel for the

clear QAM may differ depending on the cable / satellite provider. For more information, please contact your cable / satellite provider

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.

 External Device Connection

[HDMI Connection]

HDMI connection offers the highest picture quality. HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable.

e.g.)

side or rear of this unit

INTRODUCTION

PREPARATION

WATCHING TV

HDMI cable

TITLE 5 CHAPTER 15 REPEAT A-B

BD/DVD recorder with the HDMI output jack

HDMI OUT

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals, and 32kHz / 44.1kHz / 48kHz audio signals.

• This unit accepts only 2 channel audio signal (LPCM).

• You need to select “PCM” for the digital audio of the device you connected or check the HDMI audio setting. There may be no audio output if you select “Bitstream”, etc.

• This unit only accepts signals in compliance with EIA861.

[HDMI-DVI Connection]

Use an HDMI-DVI conversion cable to connect the unit to external video devices equipped with DVI output jack.

e.g.)

STEREO PCM

cable receiver or satellite box with the DVI output jack

DVI OUT

AUDIO OUT

HDMI-DVI conversion cable

To HDMI1 Input jack only

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

rear of this unit

INFORMATION

RCA audio cable

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals.

• HDMI-DVI connection requires separate RCA audio connections as well.

• Audio signals are converted from digital to analog for this connection.

• DVI does not display 480i image that is not in compliance with EIA/CEA-861/861B.

REPARATION

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

[Component Video Connection]

RCA component video connection offers better picture quality for video devices connected to the unit. If you connect to the unit’s Component Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Component Video connector.

e.g.)

RCA component video cable

rear of this unit

TITLE 5 CHAPTER 15 REPEAT A-B

BD/DVD recorder with

(red)(blue)(green)

COMPONENT VIDEO OUT

AUDIO OUT

Pr/CrPb/CbY

(green)

(blue)

(red)

the component video output jack

RCA audio cable

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals.

[S-Video Connection]

S-Video connection offers good picture quality for video devices connected to the unit. If you connect to the unit’s S-Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Video connector.

e.g.)

TITLE 5 CHAPTER 15 REPEAT A-B

AUDIO OUT

S-VIDEO

OUT

S-Video cable

side of this unit

BD/DVD recorder with the S-Video output jack

RCA audio cable

Note:

• If you connect to the S-Video Input jack and the Video Input jack at the same time, the S-Video connection will have priority.

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

[Video Connection]

RCA video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Video connector. When the audio jack of the video device is monaural, connect an RCA audio cable to the Audio L input jack.

e.g.)

side of this unit

INTRODUCTION

PREPARATION

WATCHING TV

camcorder video game

STEREO

VCR

AUDIO OUT

STAND-BY

VIDEO

OUT

RCA video cable

RCA audio cable

Note:

• If you connect to the S-Video Input jack and the Video Input jack at the same time, the S-Video connection will have priority.

[Audio Output Connection]

 Digital (for digital broadcasting only)

If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. Use a digital audio coaxial cable to connect the unit to external digital audio devices.

 Analog (for both analog and digital broadcasting)

If you connect this unit to an external analog audio device, you can enjoy stereo (2-channel) audio. Use an RCA audio cable to connect the unit to external analog audio devices.

e.g.)

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

stereo system

Dolby Digital

decoder

AUDIO IN

DIGITAL AUDIO

COAXIAL IN

INFORMATION

RCA audio cable

rear of this unit

digital audio coaxial cable

REPARATION

HDMI-DVI conversion cable

To HDMI1 Input jack only

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

[PC Connection]

This unit can be connected to your PC that has a DVI terminal. Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug-RCA conversion cable as well. If you connect this unit to your PC, you can use this unit as a PC monitor.

e.g.)

stereo mini plug-RCA

conversion cable

DVI OUT

To HDMI1 Input jack only

HDMI-DVI conversion cable

rear of this unit

personal computer

The following signals can be displayed:

Format Resolution Refresh rate Format Resolution Refresh rate

VGA 640 x 480 60Hz

SVGA 800 x 600 60Hz

XGA 1,024 x 768 60Hz

Other formats or non-standard signals will not be displayed correctly.

HDMI-DVI conversion cable should be with ferrite core.

1,280 x 768 60Hz

WXGA

1,360 x 768 60Hz

Note:

• Please purchase the HDMI-DVI conversion cable that has a ferrite core.

• The following operations may reduce noise.

- Attach a ferrite core to the AC power cord of your PC.

- Unplug the AC power cord and use the built-in battery of your PC.

 Cable Management

Keep the cables through this holder to avoid tangle them.

rear of this unit

 Plug In the AC Power Cord

Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed.

rear of this unit

AC outlet

AC power cord

Caution:

• Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V). Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.

Note:

• Each time you plugged in the AC power cord, any operations will not be performed for a few seconds. This is not a malfunction.

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

INTRODUCTION

TV Functions

 Initial Setup

This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and autoprogram, which automatically scans and memorizes viewable channels.

Before you begin:

Make sure the unit is connected to antenna or cable.

After making all the necessary connections,

press [

y (power)] to turn on the unit.

• This operation may take a few moments.

Use [Cursor K / L] to select the on-screen language

from the choices on the right side of the TV screen. (English / Español / Français)

Initial Setup

Select the language for setup display.

Elija el idioma de ajuste.

Sélectionner langue écran config.

Select Skip

• “Initial Setup” menu on step 3 will be displayed in the

selected language after you press [OK].

Use [Cursor K / L] to select “Antenna” for TV channels

or “Cable” for CATV channels, then press [OK].

Initial Setup

Make sure the antenna is connected to ''ANT. IN'' jack. Select your signal source.

Antenna

Cable

Select Skip

• “Autoprogram” will begin.

Initial Setup

Now the system is scanning for channels, please wait. Auto programming will take up to 20 minutes to complete.

Analog channels 0ch

Digital channels 0ch

English

Español

Français

Antenna

Cable

Skip

ANT.IN

MENUBACK

BackOK

Skip

Use [Cursor s / B] to select the desired location setting,

then press [OK].

Initial Setup

Select “Retail” or “Home” for your location.

Retail

Home

Select

• Select ”Retail”, the unit will be set up with predefined setting for retail displays. In this setting, the power consumption may possibly exceed the limited requirement of the ENERGY STAR® qualification.

• Select ”Home”, the unit is set to maximize the energy efficiency for home setting and it can be adjusted through a choice of picture and sound quality according to your preference.

• When the initial setup is completed, the lowest memorized channel with the confirmation message of the location setting will be displayed on the TV screen.

Note:

• If you connect the cable system directly, contact the CAT V installer.

• If you press [yy (power)] or [MENU] during autoprogram, this setting will be canceled.

• The initial autoprogram function can be executed for either “Antenna” or “Cable” only once. When you change the connection (Antenna / Cable), set autoprogram again. (Refer to page 22.)

• If there is no signal input from the antenna terminal and no operation for several seconds after you turn on the unit, “Helpful Hints” appears. Follow the instructions listed on the TV screen.

Initial Setup

No channel is registered. Try Autoprogram again? Verify that you have a cable connected to the "ANT. IN" jack on the back of the TV, the channel installation process searches this connection. If you are using a cable or satellite box, please confirm the input which you have connected the box and press "SOURCE" key on the remote control to select the appropriate source input.

Select Skip

Retry

Later

• You must set ”Home” in step 4. Otherwise, the settings of picture and sound quality you adjusted will not be memorized after you turn off the unit.

After an initial setup is completed...

• If you want to scan the channels automatically again, refer to “Autoprogram” on page 22.

• You can add the desired channels unmemorized by “Autoprogram”. Refer to “Add Channels” on page 23.

• If you want to change to another language, refer to “Language Selection” on page 24.

• If you want to change the location setting, refer to “Location” on page 35.

PREPARATION

WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

INFORMATION

ATCHING TV

 Channel Selection

Select channels by using [CH + / -] or [the Number buttons].

• To select the memorized channels, use [CH + / -] or

[the Number buttons].

• To select the non-memorized channels, use

[the Number buttons].

To Use [the Number buttons]

- When selecting analog channel 11

DTV

- When selecting digital channel 11.1

Be sure to press [•] before entering the subchannel number.

• Press [PREV CH] to return to the previously viewed

channel.

About digital TV broadcasting:

With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality. Not all digital TV broadcasts are high definition (HD). To confirm whether your watching TV program is in HD, refer to the program guide, contact your cable / satellite provider or local TV stations.

NTSC

(analog mode)

(Soccer)

CH4

Air time

6:00pm

ATSC

(digital mode)

(Soccer)

CH4-1

 Volume Adjustment

This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described.

Use [VOL + / -] to adjust the audio volume.

Volume 30

The volume bar will be displayed at the bottom of the TV screen when adjusting the volume.

• The volume bar will automatically disappear in a few seconds.

Press [MUTE] to turn off and on the sound.

Mute

“Mute” is displayed on the TV screen for a few seconds. Press [MUTE] again or [VOL + / -] to recover the

original volume.

 Sleep Timer

The sleep timer can be set to automatically turn off the unit after an incremental period of time.

Press [SLEEP] to set the sleep timer.

main channel

CH4-2

CH4-1

main channel

(News)

(Soccer)

CH4-2

subchannel

(Soccer)

can be changed by using [CH + / -].

CH4

(Soccer)

6:30pm

7:00pm

7:30pm

8:00pm

CH4-1

main channel

CH4-1

main channel

What is the subchannel?

By using high compression technology, digital broadcasting offers a service that enables multiple signals to send simultaneously. Therefore, you can select more than one program per main channel since digital broadcasting technology distinguishes between multiple channels broadcast by a single network.

Note:

• “No Signal” will appear on the TV screen after the subchannel broadcast is over.

• “Audio only program“ message will appear on the TV screen, when you receive only sound signal.

CH4-3

subchannelsubchannel

(News)

(Tennis)

Sleep

Off

Sleep timer display appears on the TV screen.

Press [SLEEP] repeatedly to change the amount of time

until shut off.

Sleep

120min.

You can set your unit to turn off after a set period of time (from 30 to 120 minutes).

• Each press of [SLEEP] will increase the time by 30

minutes.

• After setup, the sleep timer display can be called up

for checking by pressing [SLEEP].

To cancel the sleep timer

Press [SLEEP] repeatedly until “Sleep Off” is displayed on the TV screen.

Note:

• The sleep timer display will automatically disappear in a few seconds.

• When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled.

INTRODUCTION

 Still Mode

You can pause the image shown on the TV screen.

Press

[FREEZE] to pause the image shown on the TV

screen.

FREEZE

• The sound output will not be paused.

• If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted.

• The still function will be released after 5 minutes.

To cancel still mode, press any button except

[

y (power)].

 Switching Each Input Mode

You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access external devices when they are connected to the unit.

Press [SOURCE] or [CH +] repeatedly to cycle through the input modes.

 Switching Audio Mode

This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode.

Press [SAP/AUDIO] to display the currently selected audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel.

When all audio are available

SAP / STEREO SAP / MONO

SAP / STEREO

When stereo and monaural audio are available

MONO / STEREO MONO / STEREO

When SAP and monaural audio are available

SAP / MONO SAP / MONO

When only monaural audio is available

(cannot be switched)

STEREO : Outputs stereo-audio SAP : Outputs second audio program MONO : Outputs mono-audio

SAP / STEREO

MONO

PREPARATION WATCHING TV

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

Source

Video

Component

HDMI1

HDMI2

HDMI3

DTV/TV channel

Video

Component

HDMI1

(or PC input)

HDMI2

HDMI3

• Pressing [CH -] reverses the direction of the input modes.

DTV

Press [SAP/AUDIO] to display the currently selected

language and the number of available languages.

11.1

Press [SAP/AUDIO] repeatedly to cycle through the

English 1/3

available audio languages.

• Available languages differ depending on the broadcast. “Other” is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.

Note:

• [SAP/AUDIO] does not control external audio devices.

• The information display will automatically disappear in a few seconds.

INFORMATION

ATCHING TV

 TV Screen Information

You can display the currently selected channel or other information such as the audio mode on the TV screen.

In the analog mode, the current channel number and the audio mode are displayed.

DTV

In the digital mode, the detailed broadcasting information for the current channel such as program title, program guides are displayed.

Press [INFO].

SAP / STEREO

480i

• The current channel number, audio mode, type of resolutions for video signal, TV aspect ratio, CC and TV program rating are displayed on the top-right corner of the TV screen.

• To clear the display, press [INFO] again. You can also press [BACK].

TV-PG DLSV

4:3

Press [INFO] to display the details of the currently selected program.

Broadcasting information

The following information is displayed.

1 2

A Day of Memories

A quarter-century ago,which may now qualify as the good old days of newspapering,run-of-paper sales accounted for 80 percent of the industry's advertising revenues.Department stores and supermarket were

TV: TV-14

1 program title 2 program guide

(The program guide added to broadcasting information is displayed to a maximum of 4 lines.)

3 broadcast station 4 channel number 5 audio language

(Refer to “Switching Audio Mode” on page 19.)

6 effective scanning lines and scan mode 7 digital TV format 8 program aspect ratio 9 CC (not available if closed caption is set to “Off”) 10 child lock rating

KABC

English 1/2

1080i

Rating

11.1

16:9HDHD

16:9

5 6, 7, 8

9 10

Note:

• When the program guide consists of more than 4 lines, use

[Cursor K/ L] to scroll.

• “No description provided.” is displayed when the program guide is not provided.

• While the program guide is displayed, the closed caption function is interrupted.

• In external input mode, the following screen is displayed; e.g.) When an external device is connected to Video Input

jack.

Video

480iSDSD

480i

TV-PG DLSV

• The information display will automatically disappear in 1 minute.

 TV Screen Display Mode

4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal.

Press [FORMAT] repeatedly to switch the TV aspect ratio.

For 4:3 video signal

INTRODUCTION

PREPARATION WATCHING TV

For 16:9 video signal

Normal

Wide

16:9

Movie Expand

Normal

Display a 4:3 picture at its original size. Sidebars appear on both edges of the screen.

16:9

Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally to fill the screen.

Movie Expand

Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally and vertically to fill the screen. This crops out the top and bottom of the picture.

Wide

Display the picture with its center at the original size and the edges stretched horizontally to fill the screen.

Normal

Wide

Zoom

Movie Expand

Normal

Display a 16:9 picture at its original size.

Zoom

Display a 16:9 picture at its maximum size without changing its horizontal and vertical ratio.

Movie Expand

Display a vertically stretched picture.

Wide

Display a horizontally stretched picture.

For PC input signal through

Normal Full

HDMI1

Input mode

OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING

Normal

Dot By Dot

Display a proportionately stretched picture. Sidebars appear on both edges of the screen.

Full

Display a picture that is stretched out of proportion to fill the screen.

Dot By Dot

Display a picture in its original size.

INFORMATION

PTIONAL SETTING

 Main Menu

This section describes the overview of the main menu displayed when you press [MENU]. For more details, see the reference page for each item. The main menu consists of the function setting items below.

Press [MENU].

PICTURE

Smart Picture

SOUND

SETUP

FEATURES

LANGUAGE

DVD

PICTURE

You can adjust the picture quality. (Refer to “Picture Adjustment” on page 25.)

SOUND

You can adjust the sound quality. (Refer to “Sound Adjustment” on page 26.)

SETUP

• You can automatically scan the viewable channels. (Refer to “Autoprogram” on page 22.)

• You can skip the undesired channels when selecting the channels using [CH

+ /

(Refer to “Channel List” on page 23.)

• You can add the channels that were not scanned by the autoprogram. (Refer to “Add Channels” on page 23.)

FEATURES

• You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen. (Refer to “Closed Caption” on page 27.)

• You can set the viewing limitations. (Refer to ‘‘Child Lock” on page 30.)

• You can adjust the position, stability and clarity of the PC screen. (Refer to “PC Settings” on page 34.)

• You can select the energy saving mode. (Refer to “Energy Saving Mode” on page 35.)

• When you adjust the desired “PICTURE” and “SOUND” mode, you must switch the setting from “Retail” to “Home”. (Refer to “Location” on page 35.)

• You can confirm the version of the software currently used in this unit. (Refer to ”Current Software Info” on page 36.)

LANGUAGE

You can change the language (English, Spanish, French) displayed on the main menu. (Refer to “Language Selection” on page 24.)

DVD

You can customize some functions for the disc playback. Make sure the player is in stop mode. (Refer to “DVD SETTING“ section on page 46.)

Brightness

Contrast

Color

Tint

Sharpness

Color Temperature

Personal

Normal

 Autoprogram

If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform autoprogram.

Before you begin: Make sure the unit is connected to antenna or cable.

Press [MENU] to display the main menu.

Use [Cursor K / L] to select “SETUP” , then press [OK].

PICTURE

Autoprogram

Channel List

SOUND

Add Channels

SETUP

Antenna

FEATURES

LANGUAGE

DVD

Use [Cursor K / L] to select “Autoprogram”, then press

[OK].

PICTURE

Autoprogram

Channel List

SOUND

Add Channels

SETUP

Antenna

FEATURES

LANGUAGE

DVD

Use [Cursor K / L] to select an appropriate option, then press [OK].

PICTURE

Autoprogram will rescan all channels.

SOUND

Autoprogramming will take up to 20 minutes

SETUP

to complete.

FEATURES

Select your signal source.

LANGUAGE

Antenna

DVD

Cable

• When aerial antenna is connected, select “Antenna”.

• When connected to CATV, select “Cable”.

• “Autoprogram” will begin.

Now the system is scanning for channels, please wait. Auto programming will take up to 20 minutes to complete.

75%

Analog channels 10 ch

• When the scanning and memorizing are completed, the lowest memorized channel will be displayed.

Note:

• After setting “Autoprogram”, using [CH + / -] on the remote

control skips unavailable programs automatically.

• If you connect the cable system directly, contact the CAT V installer.

• If you press [yy (power)] or [MENU] during autoprogram, the setting will be canceled.

• Even if “Autoprogram“ is completed, the channel setting will be lost if the AC power cord is unplugged before turning off the unit by pressing [yy (power)].

• The PIN Code will be required once you set a PIN Code in the “Child Lock” (Refer to page 30).

• If you want to change your PIN Code, follow the instruction of “Change PIN” (Refer to page 33).

Back

Antenna

Cable

ANT.IN

6 chDigital channels

Exit

INTRODUCTION

Ch Select Watch/Skip

Back

BACK

Highlight channels for Ch Up/Down key selection.

11.2

11.3

DTV

PICTURE

SOUND

FEATURES

LANGUAGE

DVD

SETUP

DTV 11.1

 Channel List

The channels selected here can be skipped when selecting the channels using [CH + / -]. Those channels can still be selected with [the Number buttons].

Press [MENU] to display the main menu.

Use [Cursor K / L] to select “SETUP”, then press [OK].

PICTURE

Autoprogram

Channel List

SOUND

Add Channels

SETUP

Antenna

FEATURES

LANGUAGE

DVD

Use [Cursor K / L] to select “Channel List”, then press

[OK].

PICTURE

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Autoprogram

Channel List

Add Channels

Antenna

 Add Channels

This function lets you add the channels that were not added by the autoprogram due to the receptible condition at the initial setting.

Press [MENU] to display the main menu.

Use [Cursor K / L] to select “SETUP”, then press [OK].

PICTURE

Autoprogram

Channel List

SOUND

Add Channels

SETUP

Antenna

FEATURES

LANGUAGE

DVD

Use [Cursor K / L] to select “Add Channels”, then press

[OK].

PICTURE

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Autoprogram

Channel List

Add Channels

Antenna

PREPARATION

WATCHING TV

OPTIONAL SETTING

OPERATING DVD

Use [Cursor K / L] to select the channel you want to

remove, then press [OK].

• The channel display for the removed channel darkens. You will not be able to select the channel

+ /

again using [CH

• To reactivate a removed channel, use [Cursor K / L] and press [OK]. The registered channels are highlighted.

• When you remove a main channel, its subchannels are removed as well.

Note:

• The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

Press [MENU] to exit.

Use [the Number buttons] to enter the number of the

channel you want to add, then press [OK].

PICTURE

SOUND

For analog channels, select a channel to be added using number keys.

SETUP

For digital channels, you must perform

FEATURES

Autoprogram function.

LANGUAGE

DVD

BACK

Ch Change

Press [MENU] to exit.

Note:

• If setup completes successfully, “Added to the channel list” is displayed.

• If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

• By using [CH + / -], you can select the memorized channels only.

DVD SETTING TROUBLESHOOTING

Add channels

Back

INFORMATION

PTIONAL SETTING

Video

Back

Ch Change

PICTURE

SOUND

FEATURES

LANGUAGE

DVD

SETUP

Indicator is available for digital

broadcasting only.

 Antenna Confirmation

DTV

This function lets you check the digital signal strength of each channel.

Press [MENU] to display the main menu.

Use [Cursor K / L] to select “SETUP”, then press [OK].

PICTURE

Autoprogram

Channel List

SOUND

Add Channels

SETUP

Antenna

FEATURES

LANGUAGE

DVD

Use [Cursor K / L] to select “Antenna”, then press [OK].

PICTURE

Autoprogram

Channel List

SOUND

Add Channels

SETUP

Antenna

FEATURES

LANGUAGE

DVD

Use [the Number buttons] or [CH

channel for which you want to check the digital signal strength.

+ /

] to select the

 Language Selection

You can choose English, Spanish, or French as your on-screen language.

Press [MENU] to display the main menu.

Use [Cursor K / L] to select “LANGUAGE”, then press

[OK].

PICTURE

Select the language for setup display.

SOUND

SETUP

Elija el idioma de ajuste.

FEATURES

LANGUAGE

Sélectionner langue écran config.

DVD

Use [Cursor K / L] to select “English”, “Español” or

“Français”, then press [OK].

PICTURE

Select the language for setup display.

SOUND

SETUP

Elija el idioma de ajuste.

FEATURES

LANGUAGE

Sélectionner langue écran config.

DVD

English

Español

Français

English

Español

Français

PICTURE

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Current 50

• If the channel is set to analog channel or external input, you cannot confirm the antenna condition.

Press [MENU] to exit.

11.1

Back

Note:

50 Max

Ch Change

• If you need the English menus instead of the Spanish or

French menus, press [MENU]. Use [Cursor K / L] to select “IDIOMA” or “LANGUE”, then press [OK]. Use [Cursor K / L] to select “English”, then press [OK]. Press [MENU] to exit the main menu.

 Picture Adjustment

You can adjust brightness, contrast, color, tint, sharpness and color temperature.

Before you begin: You must set ”Home” in ”Location” (Refer to page 35).

Otherwise, the settings you adjusted will not be memorized after you turn off the unit.

INTRODUCTION

PREPARATION

Press [MENU] to display the main menu.

Use [Cursor K / L] to select “PICTURE”, then press [OK].

PICTURE

Smart Picture

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Use [Cursor K / L] to select the item you want to adjust,

Brightness

Contrast

Color

Tint

Sharpness

Color Temperature

then press [OK].

PICTURE

Smart Picture

Adjust the picture quality.

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Brightness

Contrast

Color

Tint

Sharpness

Color Temperature

Smart Picture

Use [Cursor K / L] to select the desired setting, then press [OK]. (‘‘Personal“, ‘‘Standard“, ‘‘Sports“, ‘‘Movie“ and ‘‘Game“)

Personal

Normal

Personal

Normal

Brightness

Contrast

Color

Tint

Sharpness

Color Temperature

Color Temp. Normal

Brightness, Contrast, Color, Tint, Sharpness, Color Temperature

Use [Cursor K / L] to select the desired setting, then use [Cursor

] to adjust.

MoveAdjust OK

MoveAdjust

Cursor

to decrease brightness

to decrease

contrast

to decrease color intensity

Cursor

to increase brightness

to increase contrast

to increase color intensity

to add red to add green

to soften to sharpen

to add warm

colors

to add cool colors

WATCHING TV

OPTIONAL SETTING

OPERATING DVD

DVD SETTING TROUBLESHOOTING

PICTURE

Smart Picture

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Brightness

Contrast

Color

Tint

Sharpness

Color Temperature

Personal

Standard

Sports

Movie

Game

Press [MENU] to exit.

Note:

• To cancel picture adjustment, press [MENU].

INFORMATION

• Only the “Personal” setting can be adjusted.

PTIONAL SETTING

 Sound Adjustment

You can adjust the smart sound, equalizer and some other sound functions.

Before you begin: You must set ”Home” in ”Location” (Refer to page 35).

Press [MENU] to display the main menu.

Use [Cursor K / L] to select “SOUND”, then press [OK].

Otherwise, the settings you adjusted will not be memorized after you turn off the unit.

Auto Volume Leveling

This function keeps a constant loudness differential between the TV commercials and the programs.

Use [Cursor K / L] to select the desired option, then press [OK].

PICTURE

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Auto Volume Leveling reduces volume differences between channels and programs, providing a consistent audio level.

Off

PICTURE

SOUND

Equalizer

SETUP

Auto Volume Leveling

FEATURES

TV Speakers

LANGUAGE

DVD

Use [Cursor K / L] to select the sound type you want to

adjust, then press [OK].

PICTURE

Smart Sound

SOUND

Equalizer

SETUP

Auto Volume Leveling

FEATURES

TV Speakers

LANGUAGE

DVD

Adjust the following items.

Smart Sound

Use [Cursor K / L] to select the desired setting, then press [OK]. (“Personal “, “Standard “, “Movie “, “Music “and “News “)

PICTURE

Smart Sound

SOUND

Equalizer

SETUP

Auto Volume Leveling

FEATURES

TV Speakers

LANGUAGE

DVD

StandardSmart Sound

Off

Ext. Amp

Standard

Off

Ext. Amp

Personal

Standard

Movie

Music

News

Select if you want to reduce volume

differences between the TV commercials and the programs.

Off

Select if you want to remove the auto volume leveling.

TV Speakers

Select the audio output from the unit’s speakers, or not. If your amplifier compatible with the CEC function is connected to this unit using an HDMI cable, some part of the sound operations such as volume up can access synchronized by using this unit’s remote control.

Use [Cursor K / L] to select the desired option, then press [OK].

Off

Ext. Amp

Off

Ext. Amp

PICTURE

SOUND

"On":

SETUP

FEATURES

LANGUAGE

DVD

Sound will be output from the TV speakers.

"Off":

Sound will not be output from the TV

speakers.

"Ext. Amp":

Operation is possible by connecting to the

HDMI-CEC compatible amp with a HDMI

cable. For details look in the user manual.

The sound will be output from the unit’s speakers.

The sound will not be output from the unit’s speakers.

This function allows you to control audio output from CEC-compatible devices with the unit’s remote control.

Equalizer

Adjust tonal quality for each frequencies. Use [Cursor use [Cursor K / L] to adjust the level, then press [OK].

] to select the specific frequency and

PICTURE

SOUND

SETUP

FEATURES

LANGUAGE

DVD

120Hz0500Hz01.5kHz05kHz010kHz

Press [MENU] to exit.

Note:

• To cancel sound adjustment, press [MENU].

• We do not guarantee 100% interoperability with other brands of CEC compliant devices.

INTRODUCTION

A. Caption Service

DVD

PICTURE

SOUND

SETUP

LANGUAGE

FEATURES

Digital Caption Service

Caption Style

Off

Caption Service

 Closed Caption

You can view closed captioning (CC) for TV programs, movies and news. Closed caption refers to text of dialogue or descriptions displayed onscreen.

Press [MENU] to display the main menu.

Use [Cursor K / L] to select “FEATURES”, then press

[OK].

Closed Caption

PICTURE

Child Lock

SOUND

PC Settings

SETUP

Energy Saving Mode

FEATURES

Location

LANGUAGE

Current Software Info

DVD

Use [Cursor K / L] to select “Closed Caption”, then

press [OK].

Closed Caption

PICTURE

Child Lock

SOUND

PC Settings

SETUP

Energy Saving Mode

FEATURES

Location

LANGUAGE

Current Software Info

DVD

See the following description for setting each item.

PICTURE

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Caption Service

Digital Caption Service

Caption Style

Off

...

“A. Caption Service”

...

“B. Digital Caption Ser vice”

...

“C. Caption Style”.

 page 27

 page 28

Home

B C

A. Caption Service

Use [Cursor K / L] to select “Caption Service”, then

press [OK].

Use [Cursor K / L] to select the desired closed caption,

then press [OK].

Caption Service

PICTURE

Digital Caption Service

SOUND

Caption Style

SETUP

FEATURES

LANGUAGE

DVD

Caption mode

CC-1 and T-1;

are the primary caption and text services. The captioning or text is displayed in the same language as the program’s dialogue (up to 4 lines of script on the TV screen, where it does not obstruct relevant parts of the picture).

CC-3 and T-3;

serve as the preferred data channels. The captioning or text is often a secondary language.

CC-2, CC-4, T-2 and T-4;

are rarely available and broadcasters use them only in special conditions, such as when “CC-1” and “CC-3” or “T-1” and “T-3” are not available.

• There are 3 display modes according to programs:

Paint-on mode:

Displays input characters on the TV screen immediately.

Pop-on mode:

Once characters are stored in memory, they are displayed all at once.

Roll-up mode:

Displays the characters continuously by scrolling (max. 4 lines).

PREPARATION

WATCHING TV

OPTIONAL SETTING

Off

CC-1

CC-2

CC-3

CC-4

T-1

T-2

T-3

T-4

OPERATING DVD

DVD SETTING TROUBLESHOOTING

INFORMATION

Press [MENU] to exit.

PTIONAL SETTING

B. Digital Caption Service

C. Caption Style

B. Digital Caption Service

DTV

In addition to the basic closed caption described on page 27, DTV has its own closed caption called digital caption service. Use this menu to change the settings for digital caption service.

Use [Cursor

L] to select “Digital Caption Service”,

then press [OK].

Off

Use [Cursor

PICTURE

Caption Service

Digital Caption Service

SOUND

Caption Style

SETUP

FEATURES

LANGUAGE

DVD

L] to select the desired digital caption

service, then press [OK].

Off

CS-1

CS-2

CS-3

CS-4

CS-5

CS-6

Off

CS-1 to CS-6

Press [MENU] to exit.

Caption Service

PICTURE

Digital Caption Service

SOUND

Caption Style

SETUP

FEATURES

LANGUAGE

DVD

Select if you do not want digital caption service. This is the default.

Select one of these before changing any other item in “Closed Caption” menu. Choose “CS-1” under normal circumstances.

Note:

• “Digital Caption Service” that you can switch differs depending on the broadcast description.

C. Caption Style

DTV

You can change the caption style such as font, color or size, etc.

Use [Cursor

L] to select “Caption Style”, then press

[OK].

PICTURE

Caption Service

Digital Caption Service

SOUND

Caption Style

SETUP

FEATURES

LANGUAGE

DVD

Use [Cursor

L] to select “User Setting”, then press

[OK].

User Setting

PICTURE

Font Style

SOUND

Font Size

SETUP

Font Color

FEATURES

Font Opacity

LANGUAGE

DVD

Background Color

Background Opacity

Edge Color

PICTURE

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Edge Type None

User Setting

Font Style

Font Size

Font Color

Font Opacity

Background Color

Background Opacity

Edge Color

Edge Type

Use [Cursor

Then use [Cursor

L] to select “On”, then press [OK].

L] to select an item, then press [OK].

L] to select the desired setting

and press [OK].

Picture display

Off

Middle

White

Solid

Black

Solid

Black

Off

ABCDEFGHIJKL

Edge

(Edge Color and Edge Type) Font ( Font Style, Font Size, Font Color and Font Opacity

or Transparency)

Background ( Background Color and Background Opacity or

Transparency)

• The setting description for each item is shown on the next page.

• Review your setting choice made on the next page by looking in the upper right corner of the displayed setting box (not all selections show the differences selected).

INTRODUCTION

Font Style

Closed Captioning font style can be changed as below.

Closed Caption

User Setting

PICTURE

Font Style

SOUND

Font Size

SETUP

Font Color

FEATURES

Font Opacity

LANGUAGE

DVD

Background Color

Background Opacity

Edge Color

Edge Type

Font Size

Font size of the displayed caption can be switched as below.

Closed Caption

User Setting

PICTURE

Font Style

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Font Size

Font Color

Font Opacity

Background Color

Background Opacity

Edge Color

Edge Type

Large

Middle

Small

Font Color

Font color of the displayed caption can be switched as below.

Closed Caption

User Setting

PICTURE

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Font Style

Font Size

Font Color

Font Opacity

Background Color

Background Opacity

Edge Color

Edge Type

White

Black

Red

Green

Blue

Yel l o w

Magenta

Cyan

Edge Color

Edge color of the displayed caption can be switched as below.

User Setting

PICTURE

Font Style

SOUND

Font Size

SETUP

Font Color

FEATURES

Font Opacity

LANGUAGE

DVD

Background Color

Background Opacity

Edge Color

Edge Type

Edge type of the displayed caption can be switched as below.

User Setting

PICTURE

Font Style

SOUND

Font Size

SETUP

Font Color

FEATURES

LANGUAGE

Font Opacity

DVD

Background Color

Background Opacity

Edge Color

Press [MENU] to exit.

Edge Type

Closed Caption

White

Black

Red

Green

Blue

Yel l o w

Magenta

Cyan

Closed Caption

None

Raised

Depressed

Uniform

L. Shadow

R.Shadow

PREPARATION

WATCHING TV

OPTIONAL SETTING

OPERATING DVD

Font Opacity

Font opacity of the displayed caption can be switched as below.

Closed Caption

User Setting

PICTURE

Font Style

SOUND

Font Size

SETUP

Font Color

FEATURES

LANGUAGE

DVD

Font Opacity

Background Color

Background Opacity

Edge Color

Edge Type

Solid

Flash

Translucent

Transparent

Background Color

Background color of the displayed caption can be switched as below.

Closed Caption

User Setting

PICTURE

Font Style

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Font Size

Font Color

Font Opacity

Background Color

Background Opacity

Edge Color

Edge Type

White

Black

Red

Green

Blue

Yel l o w

Magenta

Cyan

Background Opacity

Background opacity of the displayed caption can be switched as below.

Closed Caption

User Setting

PICTURE

Font Style

SOUND

Font Size

SETUP

Font Color

FEATURES

Font Opacity

LANGUAGE

DVD

Background Color

Background Opacity

Edge Color

Edge Type

Solid

Flash

Translucent

Transparent

Note:

• To show the closed caption on your TV screen, broadcast signal must contain the closed caption data.

• Not all TV programs and commercials have the closed caption or all types of the closed caption.

• Captions and texts may not match the TV voice exactly.

• Changing channels may delay the closed caption for a few seconds.

• Adjusting or muting the volume may delay the closed caption for a few seconds.

• Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace with the on-screen action. This is not a malfunction.

• The caption or text characters will not be displayed while the main menu or functions display is shown.

• If a black box appears on the TV screen, this means that the closed caption is set to the text mode. To clear the box, select “CC-1”, “CC-2”, “CC-3”, “CC-4” or “Off”.

• If the unit receives poor quality television signals, the captions may contain errors, or there might be no captions at all. Some possible causes of poor quality signals are:

- Automobile ignition noise

- Electric motor noise

- Weak signal reception

- Multiplex signal reception (ghosts or screen flutter)

• The unit retains the closed caption setting if the power fails.

• Closed caption will not be displayed when you are using an HDMI connection.

• When the unit receives special effects playback signal (i.e., Search, Slow and Still) from a VCR’s video output channel (CH3 or CH4), the unit may not display the correct caption or text.

DVD SETTING TROUBLESHOOTING

INFORMATION

PTIONAL SETTING

PC Settings

Energy Saving Mode

Location

Current Software Info

Home

Closed Caption

DVD

PICTURE

SOUND

SETUP

LANGUAGE

FEATURES

Child Lock

 Child Lock

Child lock reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programs inappropriate for children and any channels or external input modes can be invisible.

Press [MENU] to display the main menu.

Use [Cursor

L] to select “FEATURES”, then press

[OK].

Closed Caption

PICTURE

Child Lock

SOUND

PC Settings

SETUP

Energy Saving Mode

FEATURES

Location

LANGUAGE

Current Software Info

DVD

Use [Cursor K / L] to select “Child Lock”, then press

[OK].

Use [the Number buttons] to enter the 4-digit

numbers for your PIN Code.

PICTURE

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Enter PIN

PIN Code

See the following description for setting each item.

PICTURE

SOUND

SETUP

FEATURES

LANGUAGE

DVD

Channel Lock

US Movie ratings lock

US TV ratings lock

Canadian English Rating

Canadian French Rating

Region ratings lock

Change PIN

A B C

...

Home

“A. Channel Lock”

...

“B. US Movie ratings lock”

...

“C. US TV ratings lock”.

...

“D. Change PIN”

 page 31

 page 32

 page 33

Note:

• When you select a rating and set it to “Block”, the higher ratings will be blocked automatically. The lower ratings will be available for viewing.

• When you set the highest rating to “View”, all ratings turn to “View” automatically.

• To block any inappropriate programs, set your limits in “US Movie ratings lock”, “US TV ratings lock” and “Region ratings lock”.

• The Child Lock setting will be retained after a power failure (except the access code reverts to 0000).

• If the rating is blocked, will appear.

• “Region ratings lock” will be available when the unit receives a digital broadcast using the new rating system.

• If the broadcasting signal does not have the region ratings lock information, “Region ratings lock is currently not available.” will appear. This message will also appear when you try to access “Region ratings lock” after you have cleared the region ratings lock information, and the new information has not been downloaded since.

• The Canadian rating systems on this unit is based on CEA-766-A and the Canadian Radio-Television and

BACK

Back

Telecommunications Commission (CRTC) policy.

• When you have not set up your PIN Code,

enter t

• When the PIN Code is correct, “Child Lock” menu is displayed.

+ 140 hidden pages