Philips 32PT9100D/37, 30PW9110D/37, 30PW9100D/37, 26PW9100D/37 Hook Up Guide
Video Camera/Games Console to TV
4
How to
TV Side Jack Panel
Composite Audio/Video
Connect the video
cable (yellow) from
the video output on
camera (or other
device) to the video
input (yellow)
located on the side
of TV.
Turn on TV and the
device. Press CH+ or
CH- on the remote
control until FRONT/
SIDE appears on TV
screen.
Other Possible Connections
S-Video
Refer to panel 3.
BA
DC
Connect audio cables
(red/white) from audio
outputs on device to
audio inputs (red/white)
on the side of TV.
Note: for mono devices,
connect only white audio
cable from device’s audio
output to white audio input
on the side of TV.
Press PLAY on the
device to verify
connection.
TV
Video Camera
Remote
Cont
rol
B
VIDEO
AUDIO
LEFT RIGHT
Video Camera Jack Panel
C
CH+ and CH- Buttons
A
S-VIDEO
S-VIDEO
VIDEO
AUDIO
R
make the best connection
Use this guide to achieve the optimal connection for each of your components.
Alte
L
HDMI
High-Definition
Interface
uncompressed,
audio/video
HDMI
connection. Please use a
certified HDMI cable
rnative connections are also provided.
Connection Basics
Best Better Good
Component Video
Multimedia
provides an
all-digital
connection.
provides the
Set-Top Box to TV
1
ultimate
Input
Provides superior picture
quality by separating the
green, blue and red
luminance signals. Typically
used with red/white
audio cables.
HDMI
S-Video
Supplies a better picture
than RF and Composite
connections. Used with
red/white audio cables.
OR
Basic Basic
Composite Audio/Video
Separate video (yellow) and
audio (red/white) cables that
provide a basic connection from
the cable box and other devices.
Note : The color of audio inputs
may differ, e.g. red/white or
red/black.
RF Cable
RF
Provides a basic
connection
for antenna or cable.
Provides both audio
and video.
Need more help?
User manual:
Check the user ma
Online help
: www.p4c.philips.com or
www.usasupport.philips.com
2005 © Koninklijke Philips Electronics N.V.
All
3139
nual that came with your TV.
rights reserved.
125 34972
Connect RF cable
A
m wall to input at
fro
back of the cable
box.
Set output switch
C
on set-top box to
CH 3 or 4 and
tune TV to same
channel.
Note: In some cases,
cable box will automatically tune to channel 3
or 4. Just change
channels until picture
appears.
Other Possible
Connections
Component
Video
Refer to panel 2.
Connect cable box
B
to TV using HDMI
cable.
Cable Signal IN
from Cable Company
ABA
TO
TV/VCR
CABLE
IN
75 ? Input
Connect RF cable
from wall to input at
the back of the cable
box.
Set output switch
C
on set-top box to
CH 3 or 4 and tune
TV to same channel.
SPDIF
IN
Y Pb Pr
VIDEO
OUT
S-VIDEO
AUDIO IN
TV
TV
PASSCARD
R L
AUDIO OUT
IR
75 ?
DVD-D OUT
USB
Use second RF cable to
BA
connect the cable box
to the TV input (75 ?).
Note: This connection gives
mono sound. For stereo
sound use also composite
audio/video connection
(Refer to panel 3).
Back of Cable Box
OPTICAL
SPDIF
HDMI Input
B
DVD Player or DVD Recorder to TV
2
VCR to TV
3
Connect DVD player/
A
DVD recorder to the
TV using HDMI cable.
Insert a pre-
C
recorded DVD into
DVD player/ DVD
recorder and press
PLAY to verify
correct connection.
OR
HDMI
B
Turn on TV and DVD
player/DVD recorder.
Press CH+ or CH- on
remote control to tune
to the video supplied
by HDMI.
Back of DVD Player/Recorder
COM
P VIDEO
Y
Pb
Pr
S-VIDEO
AUDIO
VIDEO
R
OUT
OUT
OUT
L
TV
A
Remote
Control
B
CH+ and CH- Buttons
TV Jack Panel
HDMI Input
S-Video
Connect S-Video
A
cable to S-Video input
on back of TV and
S-Video output on
back of VCR.
Turn on TV and VCR.
Press CH+ or CH- on
remote control until
AV1 or AV2 appears
on TV screen.
Note: When you connect S-Video and AV2 at the same time,
you can only hear sound coming from S-Video .
Connect audio cables
B
(red/white) to audio AV
inputs on back of TV and
Audio outputs on back
of VCR.
Insert pre-recorded
DC
videotape into VCR and
press PLAY to verify
correct connection.
TV
Back of VCR
C
Remote
Control
TV Jack Panel
VIDEO
L/Mono
AUDIO
B
L R
VIDEO
AUDIO OUT
OUT
CH+ and CH- Buttons
CH+ and CH- Buttons
AV2 in
AV1 in
Y
Pb
Pr
R
COMPONEN
T VIDEO INPUT
S-VIDEO
A
S-VIDEO
ANT/CABLE
OUT
OUT
Component Video Input
Insert Component
A
Video connectors into
their corresponding
jacks on both DVD
player/DVD recorder
and TV (sometimes
labeled Y, Pb and Pr).
Turn on TV and DVD
C
player/DVD recorder.
Press CH+ or CHon remote control
until CVI appears on
TV screen.
Other Possible Connections
S-Video
Refer to panel 3.
B
D
Connect red/white
audio cables into the
audio output jacks
on DVD player/DVD
recorder and audio
AV inputs on TV.
Insert a pre-recorded
DVD into DVD player/
DVD recorder and
press PLAY to verify
correct connection.
Note: When using CVI, it is best
not to connect a video signal to
the other AV input on the TV.
Composite
Audio/Video
Refer to panel 3.
TV
A
Back of DVD Player/Recorder
C
Remote
Control
CH+ and CH- Buttons
AUDIO
VIDEO
L/Mono
AV2 in
AV1 in
Y
Pb
Pr
R
COMPONEN
T VIDEO INPUT
S-VIDEO
Composite Audio/Video
B
OR
TV Jack Panel
AUDIO
VIDEO
L/Mono
AV2 in
AV1 in
Y
Pb
Pr
R
T VIDEO INPUT
COMPONEN
S-VIDEO
TV
COM
P VIDEO
Y
Pb
Pr
S-VIDEO
AUDIO
VIDEO
R
OUT
OUT
OUT
L
Connect the video
A
cable (yellow) to the
VIDEO AV input on
back of TV and the
corresponding video
output on back
of VCR.
Turn on the TV and
C
VCR. Press CH+ or
CH- on remote
control until AV1 or
AV2 appears on TV
Connect audio cables
B
(red/white) to audio
AV inputs on back of
TV and the corre
sponding audio
outputs (L & R) on
back of VCR.
Insert pre-recorded
D
videotape into VCR
and press PLAY to
verify correct con
nection.
B
A
Back of VCR
-
R L
AUDIO OUT
-
C
S-VIDEO
VIDEO
ANT/CABLE
OUT
OUT
OUT
screen.
Remote
Control
CH+ and CH- Buttons
Loading...