Philips 32PFL5007/V7, 24PFL5007/V7 user manual

24PFL5007/V7
32PFL5007/V7

Contents

1 Notice

2 Important

7

2

3

Product information
Supported display resolutions

USB

17
17

17

3 Antenna and External

Equipment connection

4 Use your TV

4.1 Name and Function of Control
on Set 7

4.2 Name and Function of Control

on Remote 8

4.3 Battery Installation 11

Use more of your TV5

Access TV menus 11

5.1

Picture Menu 12

5.2

5.3 Sound Menu

5.4 Features Menu 12

5.5 Installation Menu 15

7

11

12

Tuner/Reception/Transmission

5

Remote control
Power
Supported TV mounts

Product Specification

17
17

17
18

18

6 Troubleshooting

16

EN 1

1 Notice

Pixel characteristics

This LCD/LED product has a high number of
colour pixels. Although it has effective pixels of

99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen. This is a structural property of
the display (within common industry standards)
and is not a malfunction.

Warranty

No components are user serviceable. Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
Service Centres and official repair shops. Failure
to do so shall void any warranty, stated or
implied.
Any operation expressly prohibited in
this manual, any adjustments, or assembly
procedures not recommended or authorised in
this manual, shall void the warranty.

2 EN

2 Important

Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.

Safety
Risk of electric shock or fire !

Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
Never place the TV, remote control or .
batteries near naked flames or other heat
sources, including direct sunlight.
To prevent the spread of fire, keep
candles or other flames away from the
TV, remote control and batteries at all
times.

Never insert objects into the ventilation
slots or other openings on the TV.
When the TV is swiveled ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.

Risk of electric shock or fire !

Never expose the remote control or
batteries to rain, water or excessive heat.
Avoid force coming on to power plugs.
Loose power plugs can cause arcing or
fire.

Risk of injury or damage to the TV !

Two people are required to lift and carry
a TV that weights more than 25 kg.

When stand mounting the TV, use only
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a
surface that can support the combined
weight of the TV and the stand.
When wall mounting the TV, use only a
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of the
TV and wall mount.

no responsibility

that result in

Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:

Never place the TV on a surface covered
by a cloth or other material that can be
pulled away.
Ensure that no part of the TV hangs over
the edge of the surface.
Never place the TV on tall furniture (such
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
Educate children about the dangers of
climbing on furniture to reach the TV.

Risk of overheating!

Never install the TV in a space.
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.

Risk of damage to the TV!

Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.

Risk of injury, or power cord damage!

Never place the TV or any objects on the
power cord.
To disconnect the TV power cord easily
from the power outlet, ensure that you
have full access to the power cord at all
times.

fire

PE Electronics Ltd. bears

for improper wall mounting

accident, injury or damage.

confined

flat

, level

EN 3

When you disconnect the power cord,
always pull the plug, never the cable.
Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.

Risk of hearing damage!

Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.

Low temperatures

If the TV is transported in temperatures
below 5
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.

C, unpack the TV and wait

Screen care

Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.

Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading,
wipe off water drops as soon as possible.

Disposal of your old product and
batteries

Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.

4 EN

3 Antenna and External Equipment Connection

ent such as VCR,DVD player

ANT IN

RF

AV OUT

RF

AV OUT

YPbPr1

L1

AV1

1. The aerial cable should not be bundled to the power cord.

Av1R1

COMPONENT (YCbCr/YPbPr) DVD INPUT

1. Connect the component outputs (YCbCr / YPbPr) of
DVD player to the component (YPbPr) input of the
the TV.

2. Connect audio outputs (L,R) of a DVD player to the
audio input (YPbPr) respectively.

3. Press the PLAY button on the DVD player.

RF

Note : Selecting a Source

Press SOURCE key on remote or on front panel keypad.
A source OSD will appear. Press Up/Down key on the remote or CH+ /CH- on

front panel can be used to select source. Press OK/Right key on the remote
or VOL’+' key from front panel to enter selected source or press SOURCE key
repeatedly to change and select source.

Press TV key on the remote to enter into TV source from any other source,

except USB source.

VIDEO INPUT

1. Connect the component outputs VIDEO out
of VCR/Cable receiver to AV1, AV2.

2. Connect audio outputs (L, R) of a DVD player to the
audio input AV1, AV2 respectively.

3. Press the PLAY button on the VCR.

EN 5

3. Switch on the PC and PC screen appears on the set.
The set can be operated as PC monitor.

HDMI

HDMI socket (HDMI1,HDMI2,HDMI3) on the TV.

USB

Connect / Insert standard USB and select USB
source on source OSD by pressing SOURCE key.

USB

HDMI

Press OK / Right key on remote, connected USB is
Listed, press OK to enter in selected USB .
Similarly front panel keys CH+/- and VOL+ can be
operated as Up/Down and OK/Right keys on remote
respectively.

NOTE :

1) CH+/CH- keys on remote are represented by - CH + on TV set.
VOL+/VOL- keys on remote are represented by on TV set.

6 EN