Philips 14PV330-07, 14PV334-07, 14PV335-07 User Manual

CONTENTS
1. CONNECTING YOUR TV-VIDEO COMBI 4..............
Connecting the cables 4.............................
Connecting a decoder or other equipment 4............
2. INSTALLING YOUR TV-VIDEO COMBI 5................
Initial installation 5..................................
Allocating a decoder 5..............................
Manual TV channel search 6.........................
Satellite receiver 6..................................
Automatic TV channel search 7......................
Searching for new TV channels 7.....................
Delete a TV Channel 8...............................
Setting the language 9..............................
Setting the time and date 9...........................
3. IMPORTANT NOTES FOR OPERATION 11..............
SUMMARY OF USER GUIDE 11.......................
User guide (OSD) 11.................................
4. TV SET FUNCTIONS 13..............................
Selecting a TV programme 13........................
Automatic volume control (AVL) 13....................
How to read TELETEXT 14............................
Switching the On-screen display (OSD) on or off 23.....
Continuous playback 24.............................
Switch off function (SLEEP TIMER) 24.................
Switch on function (WAKE-UP TIMER) 24..............
9. Before you call an engineer 25.......................
Technical terms used 25.............................
5. PLAYBACK FUNCTIONS 15..........................
Playing a cassette 15................................
Tape position indication 15...........................
Searching for tape position with the picture (picture
search) 15.........................................
Still picture 15......................................
Searching for tape position without the picture (wind
and rewind) 15.....................................
Instant View 15.....................................
Automatic search for a tape position (index search) 16..
Picture interference 16..............................
Cleaning the video heads 16.........................
6. MANUAL RECORDING 17............................
Recording without automatic switch-off 17............
Recording with automatic switch-off (OTR
one-touch-recording) 17.............................
Protecting your recordings 17........................
Auto-assembling 17.................................
7. PROGRAMMED RECORDING (TIMER) 19...............
’VPS’ (Video Programming System) and ’PDC’
(Programme Delivery Control) 19.....................
Programming a recording (with ’VIDEO Plus+’) 19.......
Programming a recording (without ’VIDEO Plus+’) 20....
Programming a recording with TELETEXT 21...........
How to check or change a TIMER 22..................
8. ADDITIONAL FUNCTIONS 23.........................
Parental control 23..................................
3
OPERATING INSTRUCTIONS IN BRIEF
The remote control
TELETEXT e TELETEXT: To switch TELETEXT on or off
STANDBY m Switch off : To switch off set, interrupt menu
function, interrupt a programmed recording (TIMER)
0-9 Number buttons:0-9
CLEAR Delete : To delete last entry or clear
programmed recording (TIMER)
TIMER s TIMER: To make a manual TIMER
programming or to alter or clear a programmed TIMER
MENU Menu: To call up or close the main menu
OK Store/Confirm: To store or confirm entry
P p Programme number: To select a programme
number up or down
AP q Select: One line up
BP r Select: One line down
DSr Select: Cursor left
SqC Select: Cursor right
_Sp Volume: To regulate the volume
y Volume off: To switch the volume on or off
z Previous programme number: To select the
previous programme number
PLAY G Playback : To play a recorded cassette
H Rewind : During STOP and STANDBY: rewind,
during PLAYBACK: reverse scanning
STOP h Pause/Stop: To stop the tape, except while a TIMER-recording is being made
I Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward
scanning
INDEX E Index search: In combination with H / I : to search for previous/next recording
on the cassette.
RECORD/OTR n Record: To record the programme selected
STILL R Still picture: To stop the tape and show a still picture
Coloured TELETEXT buttons:To select TELETEXT page directly
nred To select page/chapter shown in red at the bottom of the screen
ngreen To select page/chapter shown in green at the bottom of the screen
nyellow To select page/chapter shown in yellow at the bottom of the screen
nblue To select page/chapter shown in blue at the bottom of the screen
Front of the set
8 Power switch : To switch off the machine
Beware: If you switch off with the power switch, TIMER-recordingsare not possible!
Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)
m
P r/q
Sr/q
Programme number : To select programme number up or down
Volume: To regulate the volume
Rewind : During STOP and STANDBY: rewind, during PLAYBACK:reverse scanning
H
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward scanning
I
Record: To record the programme selected
5
Playback : To play a recorded cassette
G
Pause/Stop: To stop the tape, except while a TIMER-recording is being made
?
Audio input socket left/right stereo
AUDIO
Video input socket : To connect a camcorder or videogames
VIDEO
Headphones socket: To connect headphones
w
Back of the set
2 Aerial input socket: To connect the aerial cable
Scart socket: To connect a satellite receiver, decoder, video recorder, etc.
EXT. 1
OPERATING INSTRUCTIONS PHILIPS 14PV330/07-14PV334/335/07
Congratulations! You now own one of the most sophisticated
and simple-to-use TV-VIDEO Combinations on the market. With this TV-VIDEO Combi you can record and play VHS-standard cassettes.
Please take the time to read this operating manual before using your TV-VIDEO Combi.
Safety instructions and other notes
ADanger: High voltage!
Do not remove the top cover as there is a risk of an electrical shock!
AThe TV-VIDEO Combi does not contain any components that can
be repaired by the customer. To switch off the TV-VIDEO Combi completely you must switch it off with the power switch.
BMake sure that air can circulate freely through the ventilation
slots on the TV-VIDEO Combi.
So that you can identify your machine in the event of theft, enter the serial number (PROD.NO) here. The serial number is printed on the type plate fixed at the rear of the set.
MODEL NO. 14PV330/07-14PV334/335/07
PROD.NO: ......
This product complies with the requirements of the Directive 73/23/EEC + 89/336/EEC + 93/68/EEC.
Technical information
Measurements in cm (W / H / D): 39.2 / 40.7 / 39.8 Power consumption (Standby) : less than 45W (less than 4W) Voltage : 198-264V 50Hz Headphones : Output resistance less than 120 Ohms maximum
output voltage more than 2.6V at 120 Ohms
BMake sure that no objects or liquids enter the TV-VIDEO Combi.
If liquid is spilt into it, disconnect the TV-VIDEO Combi immediately from the power supply and call the After-sales Service for advice.
BThe TV-VIDEO Combi should not be used immediately after
transportation from a cold to a hot area or vice versa, or in
conditions of extreme humidity. After unpacking the TV-VIDEO Combi, it should be allowed to acclimatize for at least three hours before installation.
C These operating instructions have been printed on nonpolluting
paper.
C Deposit old batteries at the relevant collection points. C Please make use of the facilities available in your country for
disposing of the packaging of the TV-VIDEO Combi in a way that helps to protect the environment.
C This electronic equipment contains many materials that can be
recycled. Please inquire about the possibilitiesfor recycling your old set.
DVIDEO Plus+ and PlusCode are registered trademarks of
Gemstar Development Corporation. The VIDEO Plus+ system is manufactured under licence from Gemstar Development Corporation.
Emergency interrupt
You can use the STANDBY m button on the TV-VIDEO Combi or the remote control to interrupt any function. If you want to interrupt a running Timer recording, hold the STANDBY m button for several seconds. So if you are having operating problems, you can just interrupt the function and start again. And you can practise operating your set without any worries. No matter which buttons you press, you cannot damage it.
1
Special functions on your TV-VIDEO Combi
If a TV channel which transmits TXT/PDC is stored under programme number ’P01’, time and date will automatically be taken from the TXT/PDC information.
Crystal Clear video has become the synonym for outstanding picture quality combining Philips’ very latest technologies: Natural Colour, Studio Tracking System, Digital Studio Picture Control and laser-cut video heads.
Philips has developed a system which produces the best possible playback quality. It reduces disturbance on old, worn video cassettes, and emphasises the detail on very good quality cassettes.
When you have plugged your TV-VIDEO Combi into the mains, you will be welcomed with an OSD picture. All you have to do is follow the instructions in the "intelligent help line" for the next step. Enjoy the Automatic TV channel search/save function and the automatic time adjustment.
Automatic Volume Leveller. This prevents a sudden increase of the volume, for example, during commercials.
Simple programming system for TV-VIDEO Combis. Makes programming as easy as making a telephone call. Simply enter the programme code which you will find in your listings magazine.
The precision tape drive from Philips with a rewind time of 100 seconds (E180) and automatic tape length recognition.
Your TV-VIDEO Combi has been equiped with two tuners. This enables you to watch a programme while you are recording another programme.
2
1. CONNECTING YOUR TV-VIDEO COMBI
Important for the United Kingdom
This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug proceed as follows:
a Remove fuse cover and fuse.
b Fix new fuse which should be a BS1362 5A, A.S.T.A. or
BSI approved type.
c Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A.
DNote: * The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a 13A socket elsewhere.
How to connect a plug:
The wires in the mains lead are coloured in accordance with the following code: BLUE - ’NEUTRAL’ (’N’) BROWN - ’LIVE’ (’L’)
Connecting the cables
a Insert the aerial plug into the 2 socket.
b Insert the plug of the mains cable into the wall socket.
c If the little red light at the front panel of the set is not lit,
please switch on the set. The power switch 8 is located on the left side panel of the set.
Connecting a decoder or other equipment
d The BLUE wire must be connected to the terminal which
is marked with the letter ’N’ or coloured BLACK.
e The BROWN wire must be connected to the terminal
which is marked with the letter ’L’ or coloured RED.
f Do not connect either wires to the earth terminal in the
plug which is marked with the letter ’E’ or by the safety earth symbol \or coloured green or green-and-yellow.
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not imply over the two wires.
You can also connect additional equipment to the EXT. 1 socket. For instance, a satellite receiver, decoder or camcorder.
4
2. INSTALLING YOUR TV-VIDEO COMBI
Initial installation
a Open up the battery compartment of your remote control
and place the batteries in it as shown in the picture.
b Close the battery compartment.
c If you have connected the aerial to the TV-VIDEO Combi,
press the OK button. ’Automatic TV channel search’ starts. This picture will appear on the screen:
Allocating a decoder
Some TV stations will send coded TV channels, that you can only watch when you use a decoder. You can connect such a decoder (descrambler) to your TV-VIDEO Combi. With the following function, the connected decoder will automatically be activated for the TV programme you want to watch.
a Select the TV channel for which you want to use the
decoder with the P p button on the TV-VIDEO Combi or the number buttons 0-9 on the remote control.
b Press the MENU button on the remote control. The main
menu will appear.
c Select the line ’Installation’ with the BP r or
AP q buton and confirm with the SqC button.
d Select the line ’Manual store’ with the BP r or
AP q button and confirm with the SqC button.
Searching... CHANNELS FOUND:
//////,,,,,,,,,,,,,,,,,,,,,
Wait until all TV channels have been found. This can take several minutes. When ’autoinstall’is ready, ’Installation comp.’ will briefly appear on the screen.
DIf you have connected a decoder, you must install it
as described in the next section.
DIf you have connected a satellite receiver, please
read the section ’satellite receiver’.
e Select the line ’Decoder’ with the BP r or
AP q button.
MANUAL STORE
Channel/Frequency FREQU.
Search 123 Fine tuning (,,,,=,,,,$ Name edit xxx Programme number 01 Decoder OFF
ã Exit: « press MENU
f Select function ’ON’ with the DSr or SqC
button. When you select ’OFF’, the function will be switched off.
g Confirm with the OK button.
h To end, press the MENU button.
Your decoder has now been allocated to this TV channel.
i Press the MENU button again.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the function ’Manual store’.
5
Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be able to find all of the TV channels (e.g. coded TV channels). In that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the BP r or
AP q button and confirm with the SqC button.
E To confirm the information, press the OK button.
h If you want to change the automatic tv channel setting,
select the line ’Fine tuning’. With the DSr or SqC button you can vary the automatic tv channel setting. Important: This re-tuning is only necessary and useful in special cases, e.g.: when there are stripes on the picture with cable-TV systems.
i Press the OK button to store the TV channel.
DIf you want to search for further TV channels, start
again at step e.
c Select the line ’Manual store’ with the BP r or
AP q button and confirm with the SqC button.
MANUAL STORE
Channel/Frequency FREQU.
Search 123 Fine tuning (,,,,=,,,,$ Name edit xxx Programme number 01 Decoder OFF
ã Exit: « press MENU
d In the line ’Channel/Frequency’, select the
display for:
FREQU.: frequencyCCH’: channelSCH’: special channel
e If you know the frequency or channel of the desired TV
channel, you can enter the data in line ’Search’ with the digit buttons 0-9 .
j To end, press the MENU button.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the function ’Manual store’.
Satellite receiver
You can receive channels from the satellite receiver via the scart socket EXT. 1 . To do this, select the channel number ’E1’ with the P p button. You will have to select the channels to be received by the satellite receiver on the receiver itself.
DIf you don’t know the frequency or channel of the TV
channel of your choice, press the SqC button to start the channel search.
f In the line ’Programme number’ select the
programme number you want e.g.: ’01’, using the
DSr or SqC button.
g If you want to change the TV channel name, press the
SqC button in line ’Name edit’.
E Select the character you want to change with the
DSr or the SqC button. Change the character
with the BP r or the AP q button. Select the next character in the same way.
6
Special installation functions
You can select one of the following installation functions in order to adapt your TV-VIDEO Combi to your own specific requirements.
Automatic TV channel search
Your TV-VIDEO Combi will search for all TV channels. If you want to start the automatic TV channel search again, then follow the instructions below.
a Press the MENU button on the remote control. The main
menu will appear.
DAutomatic Channel Installation:
Some cable companies or broadcasters offer the possibility to install TV channels automatically with ’ACI’. Information about the installation offered and how to select it, will appear on the screen. This set will recognize and install TV channels with ’ACI’ automatically. TV channels will be stored from programme number 1 onward. If ’ACI’ cannot identify a TV channel, you can search for it using the method as described in the section ’Manual TV Channel Search’.
Searching for new TV channels
b Select the line ’Installation’ with the BP r or
AP q button and confirm with the SqC button.
c Select the line ’Autoinstall’ with the BP r or
AP q button.
d Press the SqC button. The ’Automatic TV channel
search’ starts.
Searching... CHANNELS FOUND:
//////,,,,,,,,,,,,,,,,,,,,,
e When the TV channel search is complete,
Installation comp.’ will appear on the screen.
a Press MENU . The main menu will appear.
b Select the line ’Installation’ with the BP r or
AP q button and confirm with the SqC button.
c Select the line ’Add new channels’ with the
BP r or AP q button and confirm with the SqC button.
Channel search will start.
d To store the TV channel, press OK .
e Repeat step d, until you have found all desired TV
channels.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you cannot select the function ’Add new channels’.
How to search for a TV channel manually, you can read in the section ’Manual TV channel search’.
DIf you have programmed a recording (TIMER), a wake-up
timer or a sleep-timer, you can’t select the function ’Autoinstall’.
7
Loading...
+ 19 hidden pages