Page 1
Spare
Parts
Catalogue
G. M.
PFAFF
AG,
PFAFF
Sewing
Machine
148
Factory,
KAISERSLAUTERN
No. 10231
engl.
R 259
Page 2
Preface
This parts catalogue contains the head parts, arm parts, bed plate parts and accessories for
the
PFAFF
148-6,
the organizational parts for the puller feed assembly and for the
148-200,
Ports which differ according to the Model (A, Bor C), such as take-up lever, thread tension,
etc.,
and
ore
compiled in a
a list of obsolete ports.
tableonpage
4.
As forOSfeasible, the component ports illustrated ore arranged according to their dispo
sitioninthe
The underlined port numbers signify assemblies which ore mode up of component ports.
For special subclass organizations, such as feed dogs, needle plates, etc., please refer to the
Attachments Catalogue.
A
numerical
Port number changes will be published on correction sheets.
All rights reserved.
machine.
index
of all ports
listedisincluded
onthe lostpages of
this
catalogue.
PFAFF
April 1959 G. M.
Sewing Machine Factory
PFAFF
AG
Page 3
PFAFF
148-6
PFAFF
Two-Needle Flat-Bed Sewing Machines
Two-needle, flat-bed sewing machine
pound
and
puller feed, bevel
organized
gear
driven vertical rotary
with com
hooks, sleeve take-up, mechanical tension release
spring-loaded feed regulator. Sewing forward only.
and
PFAFF
148-200
SameasPFAFF
needles.
148-6, but in addition fitted with swing-up
Page 4
List
of Component Parts for the
PFAFF148
in Models A, B & C
Nomenclature
Take-up lever, complete
Toke-up lever
Take-up lever driving stud
Presser
bar
spring
Tension release plunger
Model
A, B
C
A, B
C
A, B
C
A, B
C
A, B
C
Port
Number
10235
10236
10173
10174
8009
15527
6525
10633
10729
10743
Thread tension, complete
Tension
spring
Thread check spring
Balance wheel, complete
Balance
wheel
Lifting lever components
A, B
C
A, B
C
A, B
C
A, B
C
A, B
C
A, B
C
see
see
10188
10189
10183
10184
10179
15519
10133
10172
9005
9014
p. 18
p. 18
rr
Page 5
Head
Ports
Page 6
A3
8199 9119
h
£
8064 89
10188
vollst.
40811
4006
vollst'
4005
10116
239
10115
10235
vollst.
Page 7
PFAFF
148-6
19 Hinge screw for No. 10730
62 Fastening screw for No. 10009
73 Fastening screw for No.
40811
82 Fastening screw for No. 10137
89 Fastening screw for No. 8064
150 Fastening screw for No. 8008
152 Fastening screw for No. 10104
172 Fastening screw for Nos. 10027; 10028;
10175
237 Fastening screw for No.
8021
239 Fastening screw for No. 10115
243
•K
256
700288
Fastening
and
Tension
Needle
screw
for
No.
256
binding screw for No. 10006
stud
for
No.
10026
set
screw
366 Fastening screw for No. 10186
412 Fastening screw for No. 10188
469 Hinge screw for No. 10735
507 Pressure regulating thumb screw
510 Fastening screw for No. 19846
*568
*699
Fastening screw for Nos. 10728;
666 Tension stud,
667 Tension stud,
upper
lower
Fastening screw for No. 10823
1522
Nut
for
Nos.
256; 666; 667
3100 Pressure spring for No. 10732
4005
Thread
retainer
sleeve
for
4006 Pressure spring for No. 4005
4531
Washer
6505
Tension
6525
Presser bar spring, outer (Models A &
6526
Washer
for
disc
for
No.
No.
699
6525
8008 Hinge stud for No. 10173
8009
Take-up lever driving stud
8011 Hinge stud for No. 10007
8021
Lifting bracket link for No. 19846
8064 Oil
8199 Presser
*8711
9118
9119 Presser
10005
pad
for No. 10173
bar
spring, inner
Tension release plunger for No. 10188
Presser
bar
bar
spring stop pin
xN Needle bar, up to 1" needle gauge;
No. 10261, for needle gauges exceeding 1"
10006
Needle
bar
connecting stud
10731
No.
10115
(Models
N = Needle
B)
A &
B)
Gauge
10007
10008
10009
10026
10027
10028
10104
10107
10115
10116
10137
10173
10175
10179
10180
10181
10183
10185
Needle
Needle
Position
Thread
Thread
bar
connecting link
bar
frame
bracket
controller
guide,
back section
for
disc
No.
10008
Thread guide, front section
Hinge stud for No. 10008
Position pin for top
Thread
Thread
retainer
retainer
stud
stud
thread
for
collar
No.
tension
10188
Stop for No. 10179
Take-up lever (Models A &
B)
Thread guide, upper
Thread check spring (Models A &
Tension
and
Tension
Tension spring (Models A &
release
pin
for
No. 667
position pin for No. 10026
release
washer
B)
Tension release pin for No. 666
and position pin for lower thread tension
10186
*10188
Tension
Thread tension, for Models A&B, complete,
consisting of Nos.
release
plate
239;
366;
666;
4005; 4006; 6505; 10107; 10115; 10116;
10180; 10181; 10183; 10185; 10186;
10265; 105447
10235
Take-up
lever,
for
Models
A &B,complete,
consisting of Nos. 243; 8008; 8009; 8011;
10006; 10007; 10173
10265
Tension
bracket
for
No.
10188
10728 Pressure spring receptacle for No.
10729 Tension release plunger for No. 10728
10730
*10731
(Models A &
Tension
Lifting
B)
release
lever
for
No.
bracket guide for No.
10729
19846
10732 Plunger for No. 3100
10735
10823 Face
* 19846 Presser
40811
Presser
bar
lifter
plate
bar
lifting
bracket
xN
Presser foot, hinged, complete,
consisting of
No.
26565
Shank
40810
Shoe
No. Hinge pin
Vss"
needle gouge;
gauges
from
from
46864
No.
w/o
Finger guard, up to
No. 46866, for needle
No.4^68, for needle gauges
No.4^70, for needlegauges exceeding
105447
Washer
for
No.
10183
B)
667;
10731
1522;
*
See
obsolete
ports
Page 8
rs
Page 9
Arm
Parts
Page 10
9622
•'m-
mit
Befsf.
Schroube"
510
150
^ 687^
^ 9 618'
511
9635
^Wi5
10002
8004
m'
152
689
1
I
10133
9602--W
vollst.
'9612 9610
687O
9617
9648 6
Page 11
PFAFF
148-6
11 Hinge screw
50 Binding screw
for
for
No. 8040
No. 15659
58 Fastening screw for No. 8059
-t*59 Fastening screw for No. 9603
"^64 Fastening screw for Nos. 9606; 9634
70 Fastening screw
for
No. 10127
91 Fastening screw for No. 9715
for
150 Fastening screw
10018; 10195
and
end
screw
Nos. 8004; 10017;
for
No.
9605
152 Fastening screw for Nos. 9604;
257 Fastening screw
for
No. 9355
321 Fastening screw for No. 10133
323 End screw,
rear,
for No. 10002
340 Stop screw for No. 1538
405 Fastening screw for No. 9622
•K406
•K456
Fastening screw for No. 2504
Fastening screw for No. 9622
510 Fastening screw for Nos. 9646; 10031;
8011
(p. I)
511
Fastening screw for No.
8011
522 Hinge screw for Nos. 9616; 10013
565 Fastening screw for No.
10021
660 Spring suspension screw for No.
672
End
screw
for
No.
1593
680 Fastening screw, pointed, for Nos.
10015; 10045
687 Fastening screw for Nos. 9605; 9618
689 Fastening screw, blunt, for Nos.
10015; 10045
-^715 Fastening screw for No. 9648
741
Hinge screw for Nos.
*885
End screw, front, for No. 10002
1512
Nut
for
Nos.
11; 522
10013;
15659
1538 Stop motion nut for No. 6623
1593
Nut
for
No.
9609
1809
Slide
block
stud
for
No.
9645
* 1974 Position pin for No. 9645
2504
Arm
cover,
rear
5068 Spring washer for No. 6623
5070
Balance
wheel
friction
washer
5604 Oil tube, 2" long, for No. 10018
*6155
Spring washer for No. 406
6601
Slide
block
for
No.
1809
6623 Pulley for No. 9005
6759
Washer
8004 Arm
8005
Arm shaft bushing, rear, with oil
No.
8040
Feed lifting connection, complete,
shaft
6617
for
bushing,
No.
9609
center
consisting of Nos. 58; 8058; 8059
8058 Feed lifting connection
8059 Feed lifting connection cop
8281
Feed driving eccentric sleeve, complete,
consisting of Nos. 64; 9634; 9635; 9646
No. 8280, complete, for long stitches
9005 Balance wheel (Models A & B)
9621
(p. I)
9624
10014;
for
10014;
No.
wick
6623
9333 Spring
9353 Spool
washer
holder
for No. 565
base
for No. 9354
9354 Spool holder wire for No. 9353
9355 Spool holder, complete,
consisting of Nos. 9353; 9354
9602 Feed
regulator
9603 Feed regulator bearing bracket
9604 Feed regulator bearing bracket bushing
9605 Feed regulator stud
9606 Feed regulator lever stud
9609 Retaining spring for No. 9610
9610 Feed
9612 Feed
regulator
regulator
knob
lever stud
guide
9616 Feed driving connection
9617 Feed
regulator
hinge stud
9618 Hinge stud for Nos. 9616; 8281
9621
Collar
for
No.
10127
9622
Needle
bar
crank
9624 Tension spring for No. 9602
9634 Feed driving connection cop
9635 Feed driving eccentric sleeve
9644
9645
Needle
Needle
bar
bar
frame
frame
shaft
shaft
crank,
front
9646 Feed driving eccentric
*9648
*9715
10002
10013
10014 Arm
10015 Vertical
10016
10017 Vertical
10018 Vertical
10021 Top
10022
10031
10045 Vertical shaft bevel
10067
10127 Bevel
Feed regulator index plate
9650
Washer
Arm
Arm
Needle
for
cover,
shaft
bar
shaft
No.
front
frame
bevel
shaft
Vertical
shaft
shaft
shaft
cover
Oil tube, 2K" long, for No.
Feed lifting eccentric
Needle
bar
frame
gear
case, complete,
6601
shaft
connection
gear
bevel
gear,
upper
bushing,
upper
bushing, lower
gear,
lower
shaft
bushing
10044
(p. Ill)
consisting of Nos. 70; 10128; 10129
10128
10129
Bevel
gear
case section for No.
Bevel
gear case section, with threaded
borehole,
for
No.
10127
10127
10133 Balance wheel, for Models A &B, complete,
consisting of Nos. 321; 340; 1538; 5068;
5070; 6623; 9005
10177 Thread
10195
Arm shaft bushing, front, with oil wick
No.
10196
15659
*18358
*18359
Friction
Needle
for
Oil cup, front, for No. 10195
Oil cup, rear, for No. 8004
guide
10198
bar
Nos.
washer
9644; 10013
for
frame
No.
shaft
10195
crank,
rear,
29093 Model plate (not ill.)
29140
Positioning pin for No.
29093
(not
ill.)
9501 Arm (not ill.)
* See
obsolete
ports
11
Page 12
r\.
Page 13
Bed
Plate
Ports
Page 14
PFAFF
Ill
148-6
18357
2164 10126
0048
689
10165
10066
560
vollsf
If
9149
9149
9359
689
vollst.
0048
0043
11264
9149
783
560
T
6806
31
19853
624
10041
10223
150
19853 S 10046
624
10044
2164
689
10146 783
V
9529
10089
68
9149
10221
10054
vollst.
10052 10053
70
10060
9862
vollst.
10056 10057
525
10065
0062
422 46715
10157
vollsf.
10050
vollst.
10064
10063
407 46714
^BQ
10100
10099
10059
10159
vollst.
10166
''92®
10121
10123"«»«""^'58
10122
10061
4
vollst.
390
14
Page 15
N =
PFAFF
Needle
148-6
ill
Gauge
50 Fastening screw for No. 9524
for
No.
58 Fastening screw
10121
62 Fastening screw for No. 19862
68 Binding screw for No. 10146
70 Fastening screw for No. 10054
73 Fastening srew for No. 10054
82 Fastening screw for No. 26830
150 Fastening screw for Nos. 10042;
10043; 10044
290 Fastening screw for Nos. 2164; 10221
for
for
No. 10166
No. 46714
390 Fastening screw
407 Fastening screw
422 Fastening screw for No. 46715
503 Hinge
screw
for
No. 5673
505 Fastening screw for Nos. 10058; 10059
,'K509
Fastening screw for No.
525 Fastening screw for No.
10050
10161
529 Fastening screw for No. 10178
4*560 Binding screw for Nos. 10126; 10223
624 Fastening screw for No. 19853
680 Fastening screw, pointed, for No. 10046
689 Fastening screw, blunt, for Nos. 10046; 10048
783 Fastening scr^w for Nos. 2164;
785 Fastening screw for No.
10221
10211
928 Regulating screw for No. 10166
1536
Nut
for
No.
503
2164
5673
Center
Slide
stud
block
for
for
No.
No.
6806
10126
6806 Feed lifting shaft
9149
Oil
wick
for
Nos.
6806; 9529
9359 Feed lifting shaft crank, front, complete,
consistingofNos.
5673; 10126
503; 560; 1536;
9524 Feed rock shaft bearing bracket
9529
Feed
rock
shaft
9544 Adjusting
10041
Hook
drive
wedge
shaft
for No. 9524
10042 Hook drive shaft bushing, front,
up to
l®/i6"
needle
No. 9565, for
needle
gouge;
gauges
from
IVie"to2Vi8";
No. 10222,for needle
gauges
exceeding
10043 Hook drive shaft bushing, center
10044 Hook drive
10046 Hook drive shaft bevel gear,
10048 Hook drive
10050 Hook
10052 Bevel
10053 Bevel
borehole,
10054 Bevel
consistingofNos.
10056
Bobbin
shaft
bushing,
shaft
bevel
shaft
bevel
gear
gear
case
section for No. 10054
gear
case
section, with
for
No.
10054
gear
case, front, complete,
70; 10052; 10053
cose
lever
slide
rear
gear,
rear
front
threaded
2Vi6"
10057
10058
Bobbin
Hook
cose
saddle,
lever
left
fulcrum
10059 Hook saddle, right
10060
xN
Bed
slide,
front
10061
xN
Bed
slide,
rear
10062 Bed
slide,
center
10063 Retaining spring for No. 10065
10064
Friction
10065 Bed
slide,
slide
for
center,
No.
10065
complete,
consisting of Nos. 10062; 10063; 10064
10066
Feed
bar
10079
Bobbin
10089 Hook shaft, with driving pin No. 10088
10099 Pressure spring for No. 10061
10100 Guide pin for No. 10099
10121 Bevel
gear
case,
rear,
complete,
consisting of Nos. 58; 10122; 10123
10122 Bevel
10123 Bevel
gear
gear
borehde,
for
case
case
No.
section for No.
section, with
10121
10121
threaded
10126 Feed lifting shaft crank, front
10146
Feed
rock
shaft
crank,
rear
10157 Bobbin
No.10070
No.
case
base, complete, consisting of
Latch
10071
Hinge pin for No.10070
No. 10072 Pressure spring for No. 10073
for
No. 10073 Plunger
No.
10156
10158 Bobbin case
Bobbin
cap
cose
No.10070
base
10159 Bobbin cose cop, complete,
consistingofNos. 390; 928; 10158; 10166
10161
Hook
for
No.
10165
10165 Hook, with bobbin cose, complete,
consisting of Nos. 529; 10157, complete;
10159,
complete;
10161; 10167; 10178
10166 Tension spring for No. 10158
10167
Hook
washer
for
No.
10165
10178 Hook gib, pointed
10211 Feed
10221
10223 Feed lifting shaft crank,
10940
11264
Center
Washer
Bobbin
bar
stud
for
case
hinge stud
for
No.
No.
505
lever
9529
rear
18357 Oil cup for Nos. 9529; 10043
•K19853
Set
collar
19862 Bobbin
for
No.
10041
cose
lever fulcrum, complete,
consisting of Nos. 10056; 10057
26830 Retaining spring for No.
46714XN Feed
46715
xN
Needle
dog,
plate
sawtooth cut
10061
9502 Bed plate, with 4 arm screws No. 352 and
2 dowel pins No.
6531
(not.
ill.)
-K
See obsolete ports
15
Page 16
Page 17
Organizational Parts
IV
17
Page 18
46572
vollst.
46575
46573
-
35461
153 41 068
46571
vollsf.
5568
366
363
PFAFF
148
41
085
vollst.
41
076
volls>.
40623
5
005
40621
5125
vollst
25194
vollst
L
31411
25077
27201
27204
vollst.
vollst.
1
186
25054
Page 19
62
Set
screw
for
No.
82
Fastening screw for No. 5567
153
Fastening screw
Fastening screw
237
273
Fastening screw for Nos. 46571; 46574
359
Hinge
363
364
366
737
1416
1417
1435
1459
1533
2536
4170
4171
4172
4173
5005
5125
5564
5565
5567
5568
5569
8244
screw
Fastening screw for No. 41076
Hinge
screw
Hinge screw for Nos. 5568; 5569
Tension
Wood
Wood
Wood
Wood
Nut
Washer
Belt
screw
screw
screw
screw
for
guard
stud
No.
for
Hinge stud for Nos. 4170; 8245
Torsion spring for No. 4170
Guide
stud
Tension
Tension
Bobbin
Bobbin
disc
spring
winder
winder
Bobbin winder frame spring
Bobbin
Bobbin
Belt
winder
winder
guard,
41068
for
No. 35461
for
No. 40621
for Nos. 5564; 5565
for
Nos. 5568; 5569
for
No.
for
for
for
737
No.
for
41085
No.
46572
No.
29715
No.
8244
237
No.
4170
frame
frame
base
stop
latch trip lever
thumb
lever
complete,
consisting of Nos. 4170; 4171; 4172; 4173;
64021
8245
10107
25976
26110
26179
8245;
Belt guard bracket for No. 8244
Position pin for No. 5005
Spool
Spool pin
Spool disc
(on special request)
cop
for No. 26179
PFAFF
148
29601
29715
30743
35461
40618
40619
40621
40623
41063
41065
41068
41076
41085
46567
46569
46571
46572
46573
46574
46575
46694
64021
Washer
Oil drip
Thread
Set
Bobbin
Bobbin
collar
for
Nos.
pan
unwinder
for
winder
winder
1416; 1459
base
No.
46571
base
for
tension
for
No.
bracket
No.
46572
41076
Bobbin winder tension bracket, complete,
consisting of Nos. 737; 1533; 5005; 5125;
10107; 40619; 40623
Spool pin
Bobbin winder spindle
Bobbin winder pulley
Bobbin winder
stop
latch
Bobbin winder, complete,
consisting of Nos. 62; 82; 359; 364; 366;
5564; 5565; 5567; 5568; 5569; 41063;
41065; 41068
Bobbin winder, table model, complete,
consistingofNos. 237; 363; 2536; 40618;
40621, complete; 41076, complete
Thread guide wire
Thread
Spool rest
guide
rod for No. 46575
rod
Thread unwinder, complete,
consistingofNos. 153; 273; 25976; 26110;
26179; 30743; 35461; 46571; 46573, complete;
46574;
46694
Thread
guide
wire, complete,
consisting of Nos. 46567; 46569; 46575
Spool rest
Thread guide position cup for No. 46567
Spool pin
for
Circlip for No.
No.
washer,
26179
4171
foam
rubber,
IV
Organizafional Parts for Knee-Operated Presser Foot (Models A &
29
Hinge screw
78
Fastening screw for No. 25194
186
Fastening screw for Nos. 25056; 25060;
for
No. 25165
25169; 25170; 27201; 27271
367
Fastening screw for No. 30246
386
Fastening screw for No. 10738
1473
Wood
screw
for
No.
1513
2536
10204
*10737
10738
25054
25056
25060
25075
25076
25077
25164
25165
Nut
for
Nos.
Washer
10204; 25165
for
No.
Lifting lever connecting rod
Lifting lever
Lifting
lever lifting bracket
Rock shaft hanger, rear, for No. 25077
Knee
plate
for No. 25170
Rock shaft lifting bracket for No.
Rock
shaft
hanger, front, for No. 25077
Torsion spring for No. 25170
Knee
lifter
rock
Pressure spring for No. 10204
Lifting lever connecting rod joint
for
Nos.
10204; 10737
31411
25164
shaft
Organizational
58 Fastening screw for No. 10617
700150 Fastening screw for No. 31559
700152 Fastening screw for No. 30135
for
263 Hinge screw
No. 17530
367 Fastening screw for No. 30246
1417
Wood
screw
for
No.
31560
10617
Arm
cover,
rear
14675
15673
Connection
Chain
for
lever
Nos.
14675; 31560
for
No.
17530
Parts
27201
Foot-Operated
for
B)
25169 Knee
25170 Knee
plate
plate
arm
arm
bracket
25194 Bell crank bracket, complete, consisting of
No. 1916 Hinge pin
No. 25184 Bearing bracket
No.
25190
Bell
crank
27201 Lifting
for
bracket
extension,
No. 25060, complete,
consisting of Nos. 27204; 27205;
28599; 80233
27204 Lifting bracket extension for No.
27205
Roller
stud
for
No.
80233
27271
Stop
dog
for No. 25075
27201
28599 Circlip for Nos. 10204; 27205
30246 Hinge stud for No. 10737
31411 Knee lifter, complete,
consisting of Nos. 186; 25054; 25056; 25060;
25075; 25076; 25077; 25169; 25170;
80233
27201, complete;
Roller
for
No.
27271
27201
Presser Foot (Model C)
17530 Lifting
lever
connection
for
No. 14675,
complete, consisting of
No.
17531
collar
Connection
for
No.
narrow,
narrow,
31559
for
No.
for
complete,
31560
No. 31560
No. 20346 Boll joint
30135
Set
30246 Hinge stud for No. 14675
31251
Treadle,
31559 Chain suspension stud
31560
Treadle,
consistingofNos. 700150; 700152; 30135;
31251; 31559
* See
obsolete
ports
19
Page 20
Page 21
Organizational Parts
Page 22
T
If
C-iir-'f
ri
Ml
i
9405
680
vollsf.
689
y4u/
niii|i
9408
[T'l
9344 22116 9409
J
@
fywr
23033
Page 23
PFAFF
148
13 Hinge screw
for
No. 9522
50 Fastening screw for Nos. 9513; 9525; 9526
59 Binding screw for Nos. 9520; 9521
152 Fastening screw for No. 9527
263 Fastening screw for No.
9521
392 Pressure regulating thumb screw
469 Hinge screw for No. 9505
486 Fastening screw for No. 9528
510 Fastening screw for Nos. 9504; 9515
-K624
Fastening screw for No.
11314
662 Hinge screw for Nos. 9520; 9522
-K687
Fastening screw for Nos. 9506; 9511; 10104
689
End
screw
for
No.
11314
929 Fastening screw for Nos. 9525; 9526
1511 Nut
6525 Presser
6526
9503
9504 Presser
9505
9506
Washer
Presser
Presser
Feed
for
Nos. 13; 662
bar
for
bar
bar
bar
roller
spring, outer
No.
6525
lifting bracket
lifter
frame
bracket
9507 Feed roller frame, upper, for No. 9509
9509 Feed roller, driven
9511
Feed roller, driving
9512
Feed
roller
stud
for
No.
9511
9513 Feed
9515 Feed clutch
roller
frame,
body
lower,
for
for No. 9516
No.
9516 Feed clutch housing for Nos. 9520;
9517
Feed
clutch
roller
for
No.
9515
9518 Pressure spring for No. 9517
9519
Washer
for
No.
9515
9520 Driving lever for No. 9516
9521
Feed
clutch
lever
for
No.
9516
9522
9525
Connection
Presser
bar
for
frame
No.
9520
9526 Bearing bracket for No. 9512
9527 Presser
9528 Puller feed
bar
bushing
guard
for No. 9540
9539 Top feed roller assembly, complete,
consisting of Nos. 152; 392; 469; 510; 624;
687; 689; 6525; 6526; 9503; 9504; 9505;
9506; 9507; 9509; 9525; 9527; 10104; 11314
9540 Bottom
feed
roller assembly, complete,
consisting of Nos. 13; 59; 263; 510; 662;
687; 1511; 9511; 9512; 9513; 9515; 9516;
9517; 9518; 9519; 9520; 9521; 9522;
9526; 10940
10104 Hinge stud for No. 9507
10940
11314
Washer
Feed
roller
for
No.
stud
1511
for
No.
9509
9511
9521
225 Fastening screw for No. 9408
680 Fastening screw, pointed,
for
Nos.
9338; 9406
689 Fastening screw, blunt,
for
Nos. 9338; 9406
1881
Stop
pin
for
No. 9407
9338 Clutch housing
9344 Screw
9345
Hook
cop
bushing for No. 22116
drive
shaft,
rear
section
9405 Safety clutch, complete,
consisting of Nos. 225; 680; 689; 1881; 9344;
9406; 9407; 9408;9409; 20565; 22116; 23033
Safety Clutch (On special request)
9406
Clutch
9407
Clutch
9408 Hinge stud for No. 9407
9409 Spring
10203
Hook
20565 Slip
22116 Pressure spring for No. 9409
23033 Slip
collar
latch
stop
drive
washer
washer
for No. 9406
shaft,
front
for No. 9407
for No. 9409
section
-K
See obsolete ports
23
Page 24
24
Page 25
Organizational Parts
PFAFF148-200
VI
Obsolete
PFAFF
Ports
148
25
Page 26
10238
voilst.
PFAFF
148-200
742
10240
m
4005
10116
Hiii
239
105447
(P
10115
^
set
1522
0
m
Page 27
Organizational
Parts for the
PFAFF
148-200 (For
standard
parts
please
refer to the
PFAFF
148-6)
VI
239 Fastening screw for No. 10115
666 Tension stud,
667
Tension
stud,
upper
lower
742 Fastening screw for Nos. 10240;
808
1060
1522
4005
Needle
Hinge
Nut
Thread
for
set
screw
Nos.
retainer
screw
for
666; 667
No.
sleeve
10244
for
4006 Pressure spring for No. 4005
6505
Tension
10107 Position pin for
10115
Thread
disc
retainer
top
stud
thread
for
No.
No.
10115
tension
10238
10241
N =
Needle
gauge
10180 Tension
position pin
10181
Tension
release
for
release
pin for No. 667
No. 10026
washer
10183 Tension spring (Models A &
10185 Tension
release
pin for No. 666
position pin for lower
10238 Thread tension, complete,
consistingofNos. 239; 666; 667; 742;
1522; 4005; 4006; 6505; 10107; 10115;
10116; 10180; 10181; 10183; 10185;
10239; 10240; 10241; 10242; 105447
10239
Tension
10240 Tension
10241
Tension
bracket
release
release
for
No.
lever, right
lever,
10242 Position pin for Nos. 10240;
10244xN
Needle
bar,
for swing-up needles
thread
10238
left
and
B)
and
tension
10241
10116
Thread
50 Fastening screw
56
Fastening
retainer
screw
stud
for
for
collar
No. 9603
No.
9528
(not replaced)
58
Fastening
screw
for
No.
8020
(replaced by No. 568)
58
Fastening
screw
for
No.
9634
(replaced by No. 64)
68 Binding screw for Nos. 10126; 10223
73 Fastening screw for No. 10823
175
(replaced
Fastening
by No. 699)
screw
for
No. 9626
(replaced by No. 715)
336
398
Needle
Fastening
set
screw
screw
for
No.
9622
(replaced by No. 456)
407 Fastening screw for No.
509
Fastening
screw
for
46571
Nos.
9506; 9511; 10104
(replaced by No. 687)
509
Fastening
(replaced
672 End
screw,
screw
for
by No. 624)
front,
for
No.
No.
11314
10002
for
No.
10115
Obsolete
105447
Parts
687
Washer
Fastening
for
No.
screw
10183
for
No.
10050
(replaced by No. 509)
785 Fastening
2044 Position pin
2148 Spring
2279 Position pin
screw
washer
for No. 10945
for
No. 9645
for No. 2279
for
No. 2504
8020 Lifting bracket guide for No. 10019
(replaced by No. 10731)
8035 Oil
cup,
rear,
for No. 8004
(replaced by No. 18359)
9626 Feed
regulator
index
plate
9707 Arm cover, front (replaced by No. 9715)
10019 Presser
bar
lifting bracket
(replaced by No. 19846)
10101
Lifting lever (replaced by No. 10737)
10106 Tension
release
plunger
for
(replaced by No. 8711)
10197 Oil cup
10945
Set
collar
for
for
No. 10195
No.
10041
(replaced by No. 19853)
60201 Cotter pin for No. 10204
No. 10188
27
Page 28
s
Page 29
Z 1
m
Nr.
13
Numerical
IV
1 +
00
12:
00
2: 2
Fig.
11
II
V
A
Nr.
Fig.
82
89
^
3
Nr.
323
336
Fig.
II
VI
oo
index
4
Nr.
510
510
IV
oo
6
Nr.
Fig.
+
II
2044
+
2148
VI
VI
_
Fig.
II
V
Nr.
715
737
Fig.
+
741
742
783
785
785
808
885
928
1060
1416
390
392
398
II
IV
IV
IV
1
IV
IV
IV
III
V
VI
19
1
29
IV
50
II
50
III
50
V
+
50
VI
+
56
VI
58
II
58
III
58
IV
+
58
VI
150
150
150
700150
152
152
700152
152
153
172
91
11
1
II
III
IV
1
11
IV
V
VI
1 +
340
359
363
364
366
366
367
386
511
522
525
529
560
565
568
624
624
660
662
II
II
III
III
III
II
1
III
V
II
V
929
II
VI +
III
III
•0
VI
VI
II
III
V
VI
IV
2164
2279
2504
2536
3100
4005
4005
4006
4006
4170
4171
III
VI
II
IV
1
1
VI
1
VI
IV
IV
148
59
59
+
175
186
VI
IV
II
V
405
406
II
II
666
666
VI
1
1417
1435
IV
IV
4172
4173
IV
IV
407
407
412
422
456
469
469
486
503
505
507
509
509
VI
III
III
VI
667
667
1
II
1
V
V
III
III
1
III
672
+
672
680
680
680
687
687
+
687
689
689
689
1
VI
II
VI
II
III
V
II
V
VI
II
III
V
225
237
237
239
239
243
256
257
263
263
273
290
VI
IV
IV
IV
V
1
1
1
1
II
+
V
1
III
+
62
1
62
III
62
IV
64
II
68
III
+
68
VI
70
II
70
III
73
1
73
III
+
73
VI
78
82
IV
1
700288
1459
1473
1511
1512
1513
1522
1522
1533
1536
1538
1593
1809
1881
IV
IV
V
II
IV
1
VI
IV
III
II
II
II
V
4531
5005
5068
5070
5125
5564
5565
5567
5568
5569
5604
5673
6155
1
IV
II
II
IV
IV
IV
IV
IV
IV
II
III
II
699
+ =
82
Obsolete
III
Parts
321
II
510
1
1
1974
II
6505
1
29
Page 30
00
148
11
Nr.
Nr.
Fig.
Fig.
Nr.
Fig.
Nr.
Fig.
Nr.
Fig.
Nr.
Fig.
9149
Ill
VI
6505
V
9519
9635
II
Ill
10043
10107
1
9333
II
9520V9644
6525
1
II
10044
III
10107
IV
148
V
9338
V
V
9521
9645
6525
II
II
10045
10107
VI
00
V
9344
9522
V
9646
6526
1
II
10046
III
10115
1
V
9345
9524
III
9648
II
10048
III
V
6526
10115
VI
148
9353
II
9525
V
9650
II
10050
III
II
10116
6601
1
Numerical
9354
II
V+
9526
9707
VI
10052
III
6623
II
10116
VI
9355
II
9527
9715
V
II
10053
III
II
6759
III
10121
9359
III
V
9528
10002
II
10054
III
III
6806
III
10122
Index
148
V
9405
9529
10005
III
1
10056
III
III
8004
II
10123
o
148
9406
V
9539
10006
V
1
10057
III
II
10126
III
8005
V
9407
10007
V
9540
1
10058
III
8008
1
II
10127
V
9408
9544
10008
III
1
10059
III
8009
1
10128
II
9409
10009
V
9602
II
1
10060
III
8011
1
II
10129
II
10013
9501
9603
II
II
+
8020
10061
III
VI
10133
II
10014
9502
III
II
9604
II
10062
III
8021
1
10137
1
V
9503
II
10015
9605
II
8035
10063
VI
III
+
10146
III
9504
10016
V
9606
II
II
8040
II
10064
III
10157
III
10017
II
V
9505
9609
II
8058
10065
II
III
10158
III
V
9506
9610
II
8059
II
10066
III
10018
II
III
10159
9507
V
8064
1
+
10019
VI
10067
II
9612
II
III
10161
30
+ =
Obsolete
Parts
Page 31
Numerical
00
^
13
Nr. Fig.
Nr. Fig. Nr. Fig.
_ _
2
15
Index
Nr. Fig.
mmm
17
Nr. Fig.
CO
18
Nr. Fig.
+
10180
10180
10181
10181
10183
10183
10185
10185
10186
10188
10195
10196
10197
VI
VI
VI
VI
VI
1
10730
10731
1
1
25076
25077
IV
IV
40619
40621
IV
IV
148
1
1
1
1
10732
10735
10737
10738
10823
10940
10940
1
1
IV
IV
1
III
V
25164
25165
25169
25170
25194
25976
26110
IV
IV
IV
IV
IV
IV
IV
40623
40811
41063
41065
41068
41076
41085
IV
1
IV
IV
IV
IV
IV
148
+
1
II
II
10945
11264
11314
14675
VI
III
V
IV
26179
26830
27201
27204
IV
III
IV
IV
46567
46569
46571
46572
IV
IV
IV
IV
10203
10204
10211
10221
10223
10235
10238
10239
10240
10241
10242
10244
10265
IV
VI
VI
VI
VI
VI
VI
V
III
III
III
1
1
15659
15673
17530
18357
18358
18359
19846
19853
19862
20565
22116
23033
25054
IV
IV
II
III
II
II
1
III
III
V
V
V
IV
27205
27271
28599
29093
29140
29601
29715
30135
30246
30743
31251
31411
31559
IV
IV
IV
II
II
IV
IV
IV +
IV
IV
IV
IV
IV
46573
46574
46575
46694
46714
46715
46864
60201
64021
80233
105447
105447
IV
IV
IV
IV
III
III
1
VI
IV
IV
1
VI
+ =
10617
10728
10729
Obsolete
IV
1
1
Parts
25056
25060
25075
IV
IV
IV
31560
35461
40618
IV
IV
IV
31
Page 32
Imprime en Allemogne / Printed in
Germony
/ Impreso en Alemanio
Page 33
PFAFF
148
Part
Number
Section
Change
-".-l/l
Tobefiled
10005
Remarks:
New
thread.
with
page:
X N
number
«y
Old
Parts
Needle
needle
to
1")|
(for
exceeding
needle
introduced
lar
gauges
No.
1")
Change
(for
u'o
10261
gauges
to
No.:rp15826
identify
710005
needle
X N
bars
-July
New
Needle
needle
to
1
No,
710261
needle
ceeding
with,
22,
Parts
bar
gauges
1/32");
gauges
1
metric
1959
(for
up
(for
ex
3/64")
Please correct the numerical index accordingly.
No.
1 /
engl.
Page 34
PFAFF
148
Part
Number
Section
Change
Tobefiled
8244
25976
Remarks:
Belt
?/ith.
he
supplied
with
page:-Q^g
Belt
(on
Spool
guard
tlie
Old
guards
special
cap
No.
machine
at
Parts
8244,
while
special
Change
complete
request)
complete,
spool
request.
No.:,^16027
8244
25976
will
cap
"be
No.
Belt
Spool
special
regularly
25976
Date:
July
New
guard,
cap
request)
supplied
henceforth
22,
Parts
complete
(on
1959
will
Please correct the numerical index accordingly.
No.
2 /
engl.
Page 35
PFAFF
•lAR
Section
Part Number Change
••-I.-V-/2-
Tobefiled with
"64021
Remarks:
"No.
5oo77
hinge
page:
Circlip
No.
stud
•19
4171
can
No.
Old
Parts
for
be
4171
used,
Ctionge
only
(without
No.:
•T
in
conjunction
head}.
16437
•5oo77
Slip
for
with
Date:
Oct.7,
New
washer
No.
new-type
1959
Ports
4171
Please correct the numerical index accordingly.
Ur.
3/engl.
Page 36
PFAFF
•148
Part Number
Change
Section
•1/2
To be filed with page: -7
Remarks:
•Under
Wo.
No.
No.
loo26".
lolBo
lolBo,
can
Old
Parts
Toe
please
replaced
Chonge
delete
by
No.:
No.
-T
"and
16B26
•101765
position
lol765
Dote!
New
Position
for
No.
pin
'P®®•
for
Parts
pin
loo26
4,
1959
Please correct the numerical index accordingly.
•Nr.
4/engl.
Page 37
Page 38
PFAFF
148
Part Number
Change
Section
VI
Tobefiled
Remarks:
Pin
with
No.
page:
1882
23
Old
confines
Parts
Change
the
No.: T
swing
18132
of
1882
Nos.
Dote:
Position
9506
New
and
Jul,
Ports
pin
9507.
7j
19^0
Please correct
No. 5 /
engl.
the
numerical index accordingly.
Page 39
PFAFF
148
Section
Part Number Change
II/l
Tobefiled
6601
Remarks:
Ho,
with
wide,
6601
page:
Slide
Old
block,
for
cannot
Parts
Ho,
be
Change
9.84
1809
replaced
nm
No.:
by
g
15784
Ho,
14709
14709.
Slide
mm
1809
Apr
New
wide,
10,
Ports
block,
for
1959
11,17
Ho,
Please correct the numerical index accordingly.
Ho, 6 /
engl.
Page 40
PFAFF
148
Part Number
Change
Section
III/I
Tobefiled
2164
6806
Remarks:
The
unit.
The
with
shaft
angle
page:
Center
Peed
15
Old
Parts
stud
lifting
and
of
the
the
for
No.
shaft
center
center
Chonge
stud
No.: T
6806
studs
point
can
20802
4186
15664
he
Dote:
Peed
Center
4186
exchanged
New
lifting
was changed from 60°
Jan.
Ports
stud
only
30,
for
as
1961
shaft
a
to
No.
15°.
Please correct the numerical index accordingly.
lo«
7 /
engl.
Page 41
J-'
->
>"•.
^.'..J-':'
rV.
--V,
. •.' \ "
< • • '•'•'• . -- ..V
-r-
Page 42
PFAFF
148
Part
Number
Section
Change
.11/2
To be filed with
10195
Remarks:
Part
page:
Arm
front,
No.
No.
Old
shaft
10198
10195
IP
Parts
vi?ith
"bushing,
oil
can
be
Change
wick
replaced
No.:
p 2IO66 June 30, 1961
New
Parts
by
8003
part
Arm
front,
No.
No.
shaft
10198
8003.
with
bushing,
oil
wick
Please correct the numerical index accordingly.
No. 8 /
engl.
Page 43
Zjf 1
>•
••5^'*'
^'-"
'V
•£w..
if-
\
. -Vfj-r-ifi.'.,.."-
iii-ifU:.'
«-•,"
N:
Page 44
Part
Number
Section
Change
IV/3
To be filed with
31411
Remarks:
Part
page;
No.
Knee
31411
Old
19
Parts
lifter,
can
Change
comnl^ete
be
replaced
No.:
^
by
21059
31568
part
No,
Date:
Knee
31568.
New
JUne
Parts
lifter,
30,
comnlete
1961
Please correct the numerical index accordingly.
I'lo. 9 /
engl.
Page 45
Page 46
PFAFF
148
Section
Part Number Change
II/4
To be filed with
Remarks:
Part
page:
Old
No. 29692
Parts
is
Ch.„g.N..,
pulled
over
the
^
29692
knee
Date:
plate
New
Rubber
for
No.
rubber
Aug.
Parts
pad
25056
14,
cover
pad.
1961
Please correct the numerical index accordingly.
No.
10
/
engl.
Page 47
P'C
%
'It
'^t\
i:U::>»
e-^
•rt,
J
-AIV,-.;
Page 48
PFAFF
148
Part
Number
Change
Section
,
1/z
Tobe fllsd
9405
, _
Remarks:
• "
,,,
with
Safety
page:
23
Old
Safety
clutch,
consisting
680;
689;
9407; 9408;
22116;
23033.
clutch
Parts
of
1881;
can
comnlete.
Nos.
9409;
he
Change No.: T
225;
9344;
9406;
20565;
exchanged
20680
9351
^ • • — , ^ •
:
's " •' -
• ' • - " • • . • , •
only
as
Date:
Safety
consisting
680;
689; 785;
9341;
9408;
a
unit.
12.1.61
'
New
Parts
clutch,
of
Nos.
9342; 9343;
20565;
-.K-
23033.
....
- - ^ -
comnlete,
225;
9337;
9344;
-
, • v,
-.
,'"'fr''
9339;
^
Please correct the nurnericalindex accordingly, -
^
No.1l/engl.
Loading...