Select one of the following means of access to view your
handbook on-line...
Find your handbook on the PEUGEOT website, under
"MyPEUGEOT".
This personal space offers advice and other useful information for
the care and maintenance of your vehicle.
Referring to the handbook on-line also gives you access to the latest information available, easily identified by the bookmark, associated with
this symbol:
Scan this code for direct access to your handbook.
If the "MyPEUGEOT" function is not available on the PEUGEOT
public website for your country, you can find your handbook at the
following address:
http://public.servicebox.peugeot.com/ddb/
Select:
the language,
the vehicle, its body style,
the print edition of your handbook appropriate for the date of registration of
your vehicle.
This handbook describes all of the equipment available in the whole
range.
Your vehicle will be fitted with some of this equipment described
in this document, depending on its trim level, version and the
specification for the country in which it is sold.
The descriptions and illustrations are given without any obligation.
Automobiles PEUGEOT reserves the right to modify the technical
specifications, equipment and accessories without having to update
this edition of the handbook.
This document is an integral part of your vehicle. It should be passed
on to the new user in the event of sale or transfer.
Key
Welcome
Thank you for choosing a 2008.
This handbook has been designed to help you make the most
of using your vehicle in all circumstances.
Warning
This symbol marks warnings which it is
essential to observe for your own safety,
for the safety of others or to avoid any risk
of damaging your vehicle.
Information
This symbol draws your attention to
additional information for better use of
your vehicle.
Protection of
the environment
This symbol accompanies advice relating
to protection of the environment.
Contents
Overview
Eco-driving
.
.
Monitoring
Instrument panels 14
Indicator and warning lamps 16
Gauges and indicators 28
Touch screen 33
Trip computer 37
Distance recorders 40
Setting the date and time 41
AccessFittings
Remote control key 42
Doors 47
Boot 49
Locking / unlocking from
the inside 50
Alarm 51
Electric windows 53
Comfort
Front seats 55
Rear seats 57
Steering wheel adjustment 58
Mirrors 59
Ventilation 61
Heating 64
Manual air conditioning 64
Dual-zone digital air conditioning 66
Front demist - defrost 69
Rear screen demist - defrost 69
Parking sensors 105-106
Park Assist 107-110
DSC/ASR system 135
Stop & Start 95-97
Under-inflation detection 130-132
Alarm 51-52
Electric child lock 158
Headlamp beam adjustment 118
Lighting controls 111-117
Direction indicators 128
Touch screen 33-36
Trip computer with
the touch screen 38, 39
Setting the date/time with
the touch screen 41
Lighting dimmer with
the touch screen 124
Wiper controls 120-123
Hazard warning lamps 128
Locking/unlocking from inside 50
Adjusting the steering wheel 58
Horn 129
Grip control 136-137
Speed limiter 99-100
Cruise control 101-102
Memorising speeds 103
7
Overview
8
Dashboard / centre console
Overview
.
1. Cruise control / speed limiter controls.
2. Steering mounted controls for the touch
screen.
3. Lighting and direction indicator stalk.
4. Driver's front airbag.
Horn.
5. Wiper / screenwash / trip computer stalk.
6. Bonnet release lever.
7. Steering wheel adjustment control.
8. Headlamp height adjustment.
9. Switch panel:
A. Deactivation of rear parking
sensors
or
Activation of Park Assist.
B. Deactivation of the DSC/ASR system.
C. Deactivation of Stop & Start.
D. Reinitialisation of the under-inflation
detection system (vehicle without touch
screen).
E. Deactivation of volumetric
monitoring.
F. Activation of the electric child
lock.
10. Side adjustable air vents.
11. Front side window demisting/defrosting
vent.
12. Instrument panel.
13. Windscreen demisting/defrosting vent.
14. Sunshine sensor.
15. Glove box / Passenger's front airbag
deactivation.
16. Passenger's front airbag.
17. Touch screen / Audio system.
18. Central adjustable air vents.
19. Central locking and hazard warning
buttons.
20. Heating / air conditioning controls.
21. 12 V accessory socket.
USB port / auxiliary socket.
22. Open storage.
Cup holder.
23. Gear lever.
24. Grip control switch.
25. Parking brake.
26. Panoramic sunroof blind opening and
closing control.
27. Closed storage compartment.
28. Rear 12 V socket.
9
Overview
Maintenance - Technical data
®
additive and SCR system
AdBlue
(BlueHDi Diesel) 164-171
Checking levels 214-216
- oil
- brake fluid
- coolant
- screenwash fluid
additive (Diesel with particle emissions filter)
Checking components 217-218
- battery
- air / passenger compartment filter
- oil filter
- particle filter (Diesel)
- brake pads / discs
Changing bulbs 185-191
- front
- rear
Running out of fuel, Diesel 163
Opening the bonnet 211
Under the bonnet, petrol 212
Under the bonnet, Diesel 213
Petrol engines 220-221
Diesel engines 224-225
12V battery 198-200
Load reduction, energy
economy mode 201
Engine compartment
fuses 192-193, 197
Petrol weights 222-223
Diesel weights 226-228
Identification markings 230
Dimensions 229
10
Overview
.
11
Eco-driving
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
12
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without waiting.
During acceleration change up early.
With an automatic or electronic gearbox, give preference to automatic
mode and avoid pressing the accelerator pedal heavily or suddenly.
The gear efficiency indicator invites you engage the most suitable gear:
as soon as the indication is displayed in the instrument panel, follow it
straight away.
For vehicles fitted with an electronic or automatic gearbox, this
indicator appears only in manual mode.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather
than the brake pedal, and press the accelerator progressively. These
practices contribute towards a reduction in fuel consumption and CO
emissions and also helps reduce the background traffic noise.
If your vehicle has cruise control, make use of the system at speeds
above 25 mph (40 km/h) when the traffic is flowing well.
2
Control the use of your electrical
equipment
Before moving off, if the passenger compartment is too warm, ventilate it
by opening the windows and air vents before using the air conditioning.
Above 30 mph (50 km/h), close the windows and leave the air vents
open.
Remember to make use of equipment that can help keep the
temperature in the passenger compartment down ( s unroof and window
blinds...).
Switch off the air conditioning, unless it has automatic regulation, as
soon as the desired temperature is attained.
Switch off the demisting and defrosting controls, if not automatic.
Switch off the heated seat as soon as possible.
Switch off the headlamps and front foglamps when the level of light
does not require their use.
Avoid running the engine before moving off, particularly in winter; your
vehicle will warm up much faster while driving.
As a passenger, if you avoid connecting your multimedia devices
(film, music, video game...), you will contribute towards limiting the
consumption of electrical energy, and so of fuel.
Disconnect your portable devices before leaving the vehicle.
.Eco-driving
Limit the causes of excess consumption
Spread loads throughout the vehicle; place the heaviest items in the
bottom of the boot, as close as possible to the rear seats.
Limit the loads carried in the vehicle and reduce wind resistance (roof
bars, roof rack, bicycle carrier, trailer...). Use a roof box in preference.
Remove roof bars and roof racks after use.
At the end of winter, remove snow tyres and refit your summer tyres.
Observe the recommendat ions on
maintenance
Check the tyre pressures regularly, when cold, referring to the label in
the door aperture, driver's side.
Carry out this check in particular:
- before a long journey,
- at each change of season,
- after a long period out of use.
Don't forget the spare wheel and the tyres on any trailer or caravan.
Have your vehicle serviced regularly (engine oil, oil filter, air filter,
passenger compartment filter...) and observe the schedule of
operations recommended in the manufacturer's service schedule.
With a BlueHDi Diesel engine, if the SCR system is faulty your vehicle
becomes polluting; go to a PEUGEOT dealer or a qualified workshop
without delay to have the emissions of nitrous oxides brought back to
the legal level.
When refuelling, do not continue after the third cut-off of the nozzle to
avoid any overflow.
At the wheel of your new vehicle, it is only after the first 1 800 miles
(3 000 kilometres) that you will see the fuel consumption settle down to
a consistent average.
13
Monitoring
LCD instrument panel
Dials and screensControl buttons
1. Engine coolant temperature
gauge.
2. Rev counter (x 1 000 rpm or tr/min),
graduation according to engine (petrol
or Diesel).
3. Engine oil level indicator*.
4. Gear shift indicator for a manual gearbox
or gear lever position and gear for an
electronic or automatic gearbox.
5. Digital speedometer (mph or km/h)
This can be switched off with a long
press on B.
6. Cruise control or speed limiter
settings.
7. Service indicator, then total distance
recorder (miles or km).
These functions are displayed successively
on switching on the ignition.
8. Trip distance recorder (miles or km).
9. Analogue speedometer (mph or km/h).
10. Fuel gauge.
A. General lighting dimmer.
B. Recalling the service information.
Resetting the function selected (service
indicator or trip distance recorder).
Setting the time.
Switching the digital speedometer on
and off.
14
* Depending on version.
Monitoring
Active matrix instrument panel
Dials and screensControl buttons
1. Engine coolant temperature
gauge.
2. Rev counter (x 1 000 rpm or tr/min),
graduation according to engine (petrol
or Diesel).
3. Cruise control or speed limiter settings.
4. Gear shift indicator for a manual gearbox
or gear lever position and gear for an
electronic or automatic gearbox.
5. Speedometer (mph or km/h).
6. Service indicator, then total distance
recorder (miles or km).
These functions are displayed successively
on switching on the ignition.
7. Trip distance recorder (miles or km).
8. Analogue speedometer (mph or km/h).
9. Fuel gauge.
A. Main lighting dimmer.
B. Instrument panel mood lighting.
C. Recall of the service information.
Reset the selected function (service
indicator or trip distance recorder).
1
15
Monitoring
Indicator and warning lamps
Visual indicators informing the driver that a system is switched on (indicator or deactivation lamp) or has a fault (warning lamp).
16
When the ignition is switched on
Certain warning lamps come on for a few
seconds in the instrument panel and/or
instrument panel screen when the vehicle's
ignition is switched on.
When the engine is started, these same
warning lamps should go off.
If they remain on, before moving off, refer to the
information on the warning lamp concerned.
Associated warnings
The switching on of certain warning lamps
may be accompanied by an audible signal
and a message in the instrument panel or
multifunction screen.
The warning lamps may come on continuously
(fixed) or flash.
Certain warning lamps may come on in
one of two modes. Only by relating the
type of lighting to the operating status
of the vehicle can it be ascertained
whether the situation is normal or
whether a fault has occurred.
Monitoring
Operation indicator lamps
If one of the following indicator lamps comes on in the instrument panel and/or instrument panel screen, this confirms that the corresponding system has come into operation.
Parking brakefixed.The parking brake is applied or not
Foot on the
brake pedal
fixed.The ignition switch is at the
2nd position (ignition on).
properly released.
fixed.The brake pedal must be pressed.With an electronic gearbox, press the brake pedal to
flashing.With an electronic gearbox, if you
hold the vehicle on an incline using
the accelerator for too long, the
clutch overheats.
Wait until the warning lamp goes off before starting.
The period of illumination of the warning lamp is
determined by the climatic conditions (up to about
thirty seconds in extreme climatic conditions).
If the engine does not start, switch the ignition off and
then on, wait until the warning lamp goes off again,
then start the engine.
Release the parking brake to switch off the warning
lamp, keeping your foot on the brake pedal.
Observe the safety recommendations.
For more information on the parking brake, refer to the
corresponding section.
start the engine (lever in position N).
With an automatic gearbox, with the engine running,
press the brake pedal before releasing the parking
brake, to unlock the lever and come out of position P.
If you wish to release the parking brake without
pressing the brake pedal, this warning lamp will
remain on.
Stop & Startfixed.When the vehicle stops (red lights,
fixed.In the STOP mode of Stop & Start,
fixed.The wiper control is pushed
flashes for a few
seconds, then goes
off.
changing to START mode is refused
because the clutch pedal is not fully
down.
downwards.
traffic jams, ...) the Stop & Start
system has put the engine into
STOP mode.
STOP mode is temporarily
unavailable.
or
START mode is invoked
automatically.
You must declutch fully to allow the change to engine
START mode.
Automatic front wiping is activated.
To deactivate automatic wiping, operate the control
stalk downwards or put the stalk into another position.
The warning lamp goes off and the engine restarts
automatically in START mode, as soon as you want to
move off.
For more information on special cases with
STOP mode and START mode, refer to the "Stop &
Start" section.
1
* Except for the active matrix instrument panel.
19
Monitoring
Deactivation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.
This is may be accompanied by an audible signal and a message in the screen.
is set to the OFF position.
The passenger's front airbag is
deactivated.
In this case you can install a rearward
facing child seat.
Set the control to the ON position to activate the
passenger's front airbag.
In this case, do not fit a child seat in the rearward
facing position.
Monitoring
Warning lamps
When the engine is running or the vehicle is being driven, illumination of one of the following warning lamps indicates a fault which requires action on
the part of the driver.
Any fault resulting in the illumination of a warning lamp must be investigated further by reading the associated message in the screen.
If you encounter any problems, contact a PEUGEOT dealer or a qualified workshop.
The electronic brake force distribution
(EBFD) system has a fault.
The temperature of the cooling
system is too high.
fault.
You must stop as soon as it is safe to do so.
Top up with brake fluid listed by PEUGEOT.
If the problem persists, have the system checked by a
PEUGEOT dealer or a qualified workshop.
You must stop as soon as it is safe to do so.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
Stop as soon as it is safe to do so.
Wait until the engine has cooled down before topping
up the level, if necessary.
If the problem persists, contact a PEUGEOT dealer or
a qualified workshop.
The vehicle retains conventional braking.
Drive carefully at reduced speed and contact a
PEUGEOT dealer or a qualified workshop without
delay.
fixed, on switching
on the ignition,
accompanied by an
audible signal and a
The remaining driving range is
between 350 miles (600 km) and
1500 miles (2400 km).
Have the AdBlue
as possible: go to a PEUGEOT dealer or a qualified
workshop, or carry out this operation yourself by
referring to the corresponding section.
®
additive tank topped up as soon
message indicating the
remaining driving range.
24
+flashing associated with
the SERVICE warnin g
lamp, accompanied by
an audible signal and a
message indicating the
remaining driving range.
flashing, associated
with the SERVICE
warning lamp,
accompanied by an
audible signal and a
message indicating that
starting is prevented.
The remaining driving range is
between 0 and 350 miles (600 km).
The AdBlue
®
tank is empty: the
starting inhibition system required
by legislation prevents starting of the
engine.
You must top-up the AdBlue
®
additive tank to avoid a breakdown: go to a PEUGEOT dealer or a qualified
workshop, or carry out this operation yourself by
referring to the corresponding section.
To be able to start the engine, you must top-up the
®
AdBlue
additive tank: go to a PEUGEOT dealer or a
qualified workshop, or carry out this operation yourself
by referring to the corresponding section.
It is essential to add at least 3.8 litres of AdBlue
fixed, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied
by an audible signal
and a message.
flashing, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied by
an audible signal and a
message indicating the
remaining driving range.
flashing, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied
by an audible signal
and a message.
A fault with the SCR emissions
control system has been detected.
After confirmation of the fault with the
emissions control system, you can
drive for up to 650 miles (1 100 km)
before the engine starting inhibition
system is triggered.
You have exceeded the authorised
driving limit following confirmation
of a fault with the emissions control
system: the engine starting inhibition
system prevents starting of the
engine.
This alert disappears once the exhaust emissions
return to normal levels.
Contact a PEUGEOT dealer or a qualified workshop
without delay, to avoid a breakdown.
To be able to start the engine, you must call on a
PEUGEOT dealer or a qualified workshop.
Battery chargefixed.The battery charging circuit has a
Under-inflationfixed.The pressure in one or more wheels
+flashing then fixed,
in the red zone.
flashing with the
needle in the red
zone.
fixed.There is a fault with the engine
accompanied by the
Service warning lamp.
There remains approximately 5 litres
of fuel in the tank.
At this point, you begin to use the fuel
reserve.
There remains very little fuel in the
tank.
lubrication system.
fault (dirty or loose terminals, slack or
cut alternator belt, ...).
is too low.
The tyre pressure monitoring system
has a fault or no sensor is detected
on one of the wheels.
Refuel as soon as possible to avoid running out of
fuel.
This warning lamp will come on every time the ignition
is switched on, until a sufficient addition of fuel is
made.
Fuel tank capacity: approximately 50 litres.
Never continue to drive until you run out of fuel, as
this could damage the emission control and injection
systems.
You must stop as soon it is safe to do so.
Park, switch off the ignition and contact a PEUGEOT
dealer or a qualified workshop.
The warning lamp should go off when the engine is
started.
If it does not go off, contact a PEUGEOT dealer or a
qualified workshop.
Check the pressure of the tyres as soon as possible.
This check should preferably be carried out when the
tyres are cold.
Under-inflation detection is not assured.
Have the system checked by a PEUGEOT dealer or a
qualified workshop.
Airbagson temporarily.This lamp comes on for a few
a message identifying
the door, if the speed is
below 6 mph (10 km/h).
fixed, associated with a
message identifying the
door, and accompanied
by an audible signal if
the speed is above
6 mph (10 km/h).
fixed or flashing
accompanied by an
audible signal.
fixed.One of the airbag or seat belt
A door or the boot is still open.Close the door or boot.
A seat belt has not been fastened or
has been unfastened.
seconds when you turn on the
ignition, then goes off.
pretensioner systems has a fault.
Pull the strap then insert the tongue in the buckle.
This lamp should go off when the engine is started.
If it does not go off, contact a PEUGEOT dealer or a
qualified workshop.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
1
27
Monitoring
Gauges and indicators
Service indicator
System which informs the driver when the
next service is due, in accordance with the
manufacturer's servicing schedule.
The point at which the service is due is
calculated from the last reset of the indicator,
according to the mileage covered and the time
elapsed since the last service.
For BlueHDi Diesel versions, the degree of
deterioration of the engine oil is also taken into
account.
More than 1 800 miles (3 000 km)
remain before the next service is due
When the ignition is switched on, no service
information appears in the screen.
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 7 seconds after the ignition is switched on, the
spanner symbolising the service operations comes
on. The distance recorder display line indicates the
distance remaining before the next service is due.
Example: 1 700 miles (2 800 km) remain before
the next service is due.
For 7 seconds after the ignition is switched on, the
screen indicates:
7 seconds after the ignition is switched on,
the spanner goes off; the distance recorder
resumes its normal operation. The screen then
indicates the total and trip distances.
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560 miles (900 km) remain before
the next service is due.
For 7 seconds after the ignition is switched on,
the screen indicates:
7 seconds after the ignition is switched on,
the distance recorder resumes its normal
operation. The spanner remains on to
indicate that a service must be carried out
soon.
28
Loading...
+ 310 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.