Petsafe Panel Pet Door Insert, RPA00-12510 Gray, RPA00-12116 White Homeowner's Manual

Panel Pet Door Insert™ Homeowner’s Guide

Model Numbers: RPA00-12510 Gray

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

These symbols indicate that you should refer to the Homeowner’s Informational Guide for important information.

RPA00-12116 White

WARNING

When children are present in the home, it is important to consider the pet door during child proofi ng activities, the pet door
may be misused by a child resulting in the child accessing potential hazards that may be on the other side of the pet door.
Purchasers/Homeowners with swimming pools should ensure that the pet door is monitored at all times and that the swimming
pool has adequate barriers to entry. If a new hazard is created inside or outside of your home, which may be accessed through
the pet door, Radio Systems
The closing panel or lock, if applicable, is provided for aesthetic and energy effi ciency purposes and is not intended as a
security device. Radio Systems
responsibility for oversight of the opening it creates.

®

Corporation recommends that you properly guard access to the hazard or remove the pet door.

®

Corporation will not be liable for unintended use and the purchaser of this product accepts full

CAUTION

The user, prior to installation, must become familiar with all building
codes that may affect the installation of the pet door and determine,
along with a licensed contractor, its suitability in a given installation.
This pet door is not a fi re door. It is important for the owner and
contractor to consider any risks that may be present inside or outside
of the pet door, and any risks that may be created by subsequent
changes to your property and how they may relate to the existence and
use, including misuse of the pet door.

Thank you for choosing the PetSafe® brand. You and your pet deserve a companionship that includes memorable moments and a shared understanding together.
Our products and training tools promote a lifestyle of protection, teaching, and love—essentials that infl uence memories for a lifetime. If you have any questions
about our products or training your pet, please visit our website at www.petsafe.net or contact our Customer Care Center at 1-800-732-2677.

PRODUCT WARRANTY

To get the most protection out of your one-year warranty, please register your product within 30 days at www.petsafe.net. By registering and keeping your receipt,
you will enjoy the product’s full warranty and should you ever need to call the Customer Care Center, we will be able to help you faster. Most importantly, PetSafe
will never give or sell your valuable information to anyone. Complete warranty information is available online at www.petsafe.net.

The PetSafe® Panel Pet Door Insert™ was professionally installed by a door manufacturer or a professional door technician; please contact the manufacturer or
technician on any questions concerning installation. Any other questions about your PetSafe
1-800-732-2677 or by visiting www.petsafe.net.

To maintain your PetSafe® Panel Pet Door Insert™, please reference the expanded view and replacement parts available on reverse side:

Expanded
View

(2) Adjustable Hinge

Plate Assembly

Dual-Flap Mount

Interior

Cover Plate

with T-Grooves

Exterior

Cover Plate

®

pet door can be found by calling PetSafe® Customer Care Center at

Finishing Plugs

®

Closing Panel Flexible Flap Flexible Flap Interior Panel Insert

Bottom Mount

with T-Grooves

Bottom

Magnets

Exterior Panel Insert

with T-Guides

Replacement Parts & Accessories

To purchase replacement parts or accessories, contact PetSafe® Customer Care Center at 1-800-732-2677 or by visiting www.petsafe.net.

Description Part #

Large Replacement Flap

Gray Replacement Hardware Kit

White Replacement Hardware Kit

Closing Panel

Gray PetSafe® Panel Blank Insert

White PetSafe® Panel Blank Insert

™

™

White Finishing Plugs (50)

Gray Finishing Plugs (50)

M3.5 x 20mm screws (50)

Flap Replacement/Horizontal Flap Adjustment: The PetSafe

PAC11-11039

MPA00-12085

MPA00-12118

MPA00-12828

RPA00-12746

RPA00-12117

MPA00-12823

MPA00-12824

MPA00-12825

®

Panel Pet Door Insert™ uses two PetSafe® large fl aps. To replace a fl ap, simply hold fl ap up and
unscrew the fi ve screws on the lower section of the inboard Hinge Plate. Replace with a new fl ap and return existing fi ve screws to secure fl ap back into place.
To horizontally adjust a fl ap, hold fl ap up and loosen the fi ve screws on the lower section of the inboard Hinge Plate. Adjust fl ap left or right for a snug fi t and
tighten screws back into place.

Vertical Flap Adjustment: To adjust fl ap vertically the Interior or Exterior Cover plate will need to be removed, depending on which fl ap is being modifi ed. Use a
small fl at head screwdriver to remove Finishing Plugs on the Interior or Exterior Cover. Loosen the fi ve screws on the upper section of the Hinge Plate and adjust
fl ap up or down for a snug fi t. Tighten screws back into place and replace Finishing Plugs.

NOTE: Vinyl fl aps shrink during cold months and stretch in warmer months and may need to be adjusted to ensure a proper fi t during seasonal changes.

Paintable Design: The PetSafe

®

Panel Pet Door Insert™ was professionally painted during installation. If you need to repaint your pet door insert, the only
parts paintable are the Interior and Exterior Panels, Dual-Flap Mount, Bottom Mount, Interior and Exterior Cover Plates and Finishing Plugs. Any new paintable
parts should be primed before painting. T-grooves on the Exterior Panel Insert, the Dual-Flap Mount and Bottom Mount should not be painted to allow movement
after installation.

Closing Panel: Included with the PetSafe

®

Panel Pet Door Insert™ is a plastic snap-on closing panel. Convenient, for those times when limiting access for your

pet’s entry and exit is necessary.

®

PetSafe

The PetSafe

In no event shall Radio Systems

Panel Blank Insert™: If you no longer have the need for a pet door, you can replace your PetSafe® Panel Pet Door Insert™ with the Panel Blank Insert™.

®

Panel Blank Insert™ provides the same paneled look without the pet door and is paintable.

®

Corporation be liable for any direct, indirect, punitive, incidental, special or consequential damages, or any damages whatsoever
arising out of or connected with the use or misuse of this Product. Buyer assumes all risks and liability from the use of this Product.

®

Under no circumstances will PetSafe

be liable for any labor charges or any expenses whatsoever in connection with the painting, removal, repair or installation of

this product.

10427 Electric Avenue
Knoxville, TN 37932
www.petsafe.net

400-1162/2