Petsafe In-Ground Fence User Manual
Stubborn Dog Receiver
for In-Ground Fence Kit
Récepteur pour chien récalcitrant
pour le kit « In-Ground Fence »
Ontvanger koppige hond
bij kit ‘Ondergrondse omheining’
Operating Guide
Operating Guide
Manuel d’utilisation
Manuel d’utilisation
Gebruiksaanwijzing
Gebruiksaanwijzing
Please read this entire guide before beginning
Veuillez lire ce manuel en entier avant de commencer
Gelieve deze gids volledig door te lezen voordat u begint
Thank you for choosing PetSafe
world. Our mission is to ensure your pet’s safety by providing you the tools and techniques to
successfully train your pet. If you have any questions, please contact the Customer Care Centre
or visit our website at www.petsafe.net.
®
, the best selling brand of electronic training solutions in the
__________________________________________
Table of Contents
Prepare the Receiver Collar......................................................................... 3
Fit the Receiver Collar ................................................................................ 5
Terms of Use and Limitation of Liability ..................................................... 6
Caution ..................................................................................................... 7
Français .................................................................................................... 8
Nederlands ..............................................................................................14
2 www.petsafe.net
Prepare the Receiver Collar
Your Receiver Collar comes with short Contact Points installed. Use the long Contact Points for
pets with long or thick hair. Using the Test Light Tool, tighten the Contact Points one-quarter to
one-half turn beyond finger tight (1A). Check the tightness weekly.
To Insert and Remove the Battery
Note: Do not install the battery while the Receiver Collar is on your pet.
1. Remove the screws with a Phillips screwdriver.
2. Remove the Battery Lid (1B).
3. Install a 9-volt alkaline battery (1C).
4. Replace the Battery Lid (1D).
5. Reinstall the screws. Do not over-tighten the screws.
Replacement 9-volt alkaline batteries can be found at many retailers.
1A
1B
To Change the Mode
Read all the steps before attempting to
change the mode.
1. With the battery installed, press the
Mode Button and release it when the
Receiver Indicator Light lights up (1E).
2.
The Receiver Indicator Light will emit a
number of flashes representing the mode
setting (1F).
3. Change the mode by pressing and
releasing the Mode Button within
5 seconds of the previous flashes.
1D
1C
1E
1F
www.petsafe.net 3
The modes cycle from 1 to 5. Pushing the Mode Button while the Receiver Collar is on Mode 5
will cause the Receiver Collar to revert to Mode 1. Refer to the Function and Response Table to
choose the Mode that best fits your pet.
The Receiver Collar is equipped to automatically increase the level of Static Correction the longer
your pet remains in the Static Correction Zone if the collar is set at Mode 2 or above.
The Receiver Indicator Light acts as a low battery indicator, flashing every 4 to 5 seconds when
battery replacement is required.
Mode 1
• When your dog reaches the warning zone, the collar will emit a warning tone.
• If he continues to the correction zone or lingers in the warning zone for 2 seconds,
the collar will emit a simultaneous correction tone and vibration.
Mode 2
• When your dog reaches the warning zone, the collar will emit a warning tone, then correction
tone and vibration.
• If he continues to the correction zone or lingers in the warning zone for 2 seconds,
the collar will emit a correction tone and a level 1 static correction.
• If the dog stays in the area he will receive progressively stronger static corrections
up to Level 2.
Mode 3
• When your dog reaches the warning zone, the collar will emit a warning tone.
• If he continues to the correction zone or lingers in the warning zone for 2 seconds,
the collar will emit a correction tone and a level 1 static correction.
• If the dog stays in the correction zone, he will receive progressively stronger static corrections
up to Level 5.
Mode 4
• When your dog reaches the warning zone, the collar will emit a warning tone.
• If he continues to the correction zone or lingers in the warning zone for 2 seconds,
the collar will emit a correction tone and a level 5 static correction.
Mode 5
• When your dog reaches the warning zone, the collar will emit a warning tone.
• If he continues to the correction zone or lingers in the warning zone for 2 seconds,
the collar will emit a correction tone.
4 www.petsafe.net
Function and Response Table
Indicator Light
Response
1 Flash 1 Tone and Vibration Timid
2 Flashes 2 Tone, Vibration and Static
3 Flashes 3 Tone and Static Correction
4 Flashes 4 Tone and Static Correction
5 Flashes 5 Tone only Timid
Flashes once every
4-5 seconds
Note: Begin training with Mode 3 and only increase if your pet does not respond to the Static Correction.
____________________________________________________
Mode Receiver Collar Function Temperament of Pet
Timid or Average
Correction (Low)
Average
(Medium)
Average or High Energy
(High)
Low
Battery
Fit the Receiver Collar
Important: The proper fit and placement of your Receiver Collar is important for
effective training. The Contact Points must have direct contact with your pet’s skin on
the underside of his neck.
To ensure a proper fit, please follow these steps:
1. Make sure that the battery is not installed in the Receiver Collar.
2. Start with your pet standing comfortably (2A).
3. Centre the Contact Points underneath your pet’s neck, touching the skin. If
your pet has a long or thick coat, use the enclosed long Contact Points to
reach through the hair. Note: It is sometimes necessary to trim the hair around
the Contact Points to make sure that contact is consistent.
4. Check the tightness of the Receiver Collar by
inserting one finger between the end of a Contact
Point and your pet’s neck. The fit should be snug but
not constricting (2B).
5. Allow your pet to wear the collar for several minutes,
then re-check the fit. Check the fit again as your pet
becomes more comfortable with the Receiver Collar.
2B
2A
www.petsafe.net 5
Important: For comfort, safety and effectiveness of product, please ensure the following:
• Check the fi t to prevent excessive pressure by being able to insert one fi nger between
the Contact Point and your pet’s skin.
• Your pet must be carefully examined daily for any signs of a rash or sore.
• If a rash or sore is observed, discontinue the use of the Receiver Collar for a few days.
• If the condition persists beyond 48 hours, see your veterinarian.
• Your pet’s neck and the Contact Points must be washed weekly with a wash cloth and
mild hand soap, then rinsed thoroughly.
A condition called Pressure Necrosis, which is a devitalisation of the skin due to
excessive and prolonged contact against the Contact Points, may occur if the steps above
are not followed.
Important: Do not attach a leash to the collar. This can result in pulling the
Contact Points too tightly against your pet’s neck. Attach a leash to a separate,
non-metallic collar or harness, making sure the extra collar does not put pressure on
the Contact Points.
____________________________________________________
Terms of Use and Limitation of Liability
1. Terms of Use
This Product is offered to you conditioned upon your acceptance without modification of the
terms, conditions and notices contained herein. Usage of this Product implies acceptance of all
such terms, conditions, and notices.
2. Proper Use
This Product is designed for use with pets where training is desired. The specific temperament
of your pet may not work with this Product. We recommend that you do not use this product
if your pet is less than 3.6 kg (3.63 kg) or if your pet is aggressive. If you are unsure whether
this is appropriate for your pet, please consult your veterinarian or certified trainer.
Proper use includes reviewing the entire Guide provided with your Product and any specific
Caution statements.
3. No Unlawful or Prohibited Use
This Product is designed for use with pets only. This pet training device is not intended to harm,
injure or provoke. Using this Product in a way that is not intended could result in violation
of national or local laws.
4. Limitation of Liability
In no event shall Radio Systems Corporation be liable for any direct, indirect, punitive,
incidental, special or consequential damages, or any damages whatsoever arising out of or
connected with the use or misuse of this Product. Buyer assumes all risks and liability from the
use of this Product.
5. Modification of Terms and Conditions
Radio Systems Corporation reserves the right to change the terms, conditions and notices
under which this Product is offered.
6 www.petsafe.net
Loading...