Petsafe Comfort-Fit Deluxe bark control Entire Manual

Page 1

Page 2

2 1-800-732-2677

Thank you for choosing PetSafe®, the #1 selling brand of electronic training solutions in the world. Our mission is to ensure your pet’s safety by providing you the tools and techniques to successfully train your pet. If you have any questions, please contact the Customer Care Center at 1-800-732-2677 or visit our website at www.petsafe.net.

____________________________________________________________________

Table of Contents

Components ........................................................................... 3

Features .................................................................................. 3

How the PetSafe Deluxe Bark Control CollarTM Works ............... 4

Key Deﬁ nitions ....................................................................... 4

Fit the Bark Control Collar ...................................................... 5

To Insert and Remove the Battery ............................................ 7

Modes of Operation ................................................................ 8

What to Expect During Use of the Bark Control Collar ............ 8

Regular Maintenance .............................................................. 9

To Test the Bark Control Collar ............................................... 9

Accessories ........................................................................... 10

Frequently Asked Questions .................................................. 10

Troubleshooting .................................................................... 11

To Discharge the Bark Control Collar .................................... 11

____________________________________________________________________

“In a Tuskegee University study of adult shelter dogs wearing the PetSafe Bark Control CollarTM for six 30-minute sessions over two weeks, we detected no long-term adverse effects, and all dogs dramatically reduced their barking by the second day.”

Dr. Janet Steiss and Dr. Caroline B. Schaffer Tuskegee University

Page 3

www.petsafe.net 3

Components

Operating Guide

Battery

(PetSafe

RFA-67)

Warranty Card

Wa rr an ty

PetSafe Deluxe

Bark Control Collar

Features

• Low, Medium and High Modes, each containing 6 levels of progressive Static Correction

• Patented Perfect Bark technology for the most reliable bark detection

• Water Resistant

• Low Battery Indicator Light

• On/Off Switch

• Lifetime Limited Warranty

Page 4

4 1-800-732-2677

How the PetSafe Deluxe Bark Control Collar

Works

The Deluxe Bark Control Collar™ has a unique patented sensor technique that provides the most reliable bark detection available. The Bark Control Collar uses both vibration and sound sensors to discriminate each bark from other external noises. A Static Correction is administered through the Contact Points only if both the vibration from the vocal cords and the sound from the bark match the bark sampling criteria. The Bark Control Collar starts with the lowest level of Static Correction in each mode and then increases through 6 levels each time your dog barks within 30 seconds of the previous bark. If your dog does not bark again within 30 seconds, the Bark Control Collar will reset itself to the lowest level of Static Correction in the current mode. Along with each Static Correction, the Indicator Light will ﬂ ash. As a built-in safety feature, if your dog barks 15 times or more within a 50-second period, the Bark Control Collar will automatically shut off for 3 minutes.

Important:

• Before playing with your dog, remove the Bark Control Collar. The activity may cause your dog to bark, which could lead to him associating the play with the Static Correction.

• Never leave the Bark Control Collar on your dog for more than 12 consecutive hours.

____________________________________________________________________

Key Deﬁ nitions

Indicator Light: Indicates that the Bark Control

Collar is functioning properly in the TEST Mode, and when the battery is low.

Sound Activated Sensor: Detects the sound of your dog’s bark.

Mode Switch: Adjusts the levels of Static Correction your dog receives when barking. This switch is also used to turn the Bark Control Collar

off, and to test it.

Sensor Probe: Detects the vibrations of your dog’s bark.

Note: The Sensor Probe is not adjustable.

Contact Points

Battery

Sensor Probe

Mode Switch

Indicator Light

Sound Activated Sensor

est

Contact Points: Deliver the safe Static Correction.

Page 5

www.petsafe.net 5

Fit the Bark Control Collar

Important: The proper ﬁ t and placement of your Bark Control Collar is important for effective operation. The Contact Points must have direct contact with your dog’s skin on the underside of his neck.

To assure a proper ﬁ t, please follow these steps:

1. Make sure that the battery is not installed in the Bark

Control Collar.

2. Have your dog standing comfortably.

3. Center the Contact Points underneath your dog’s neck,

touching the skin.

YES

Note: It is sometimes necessary to trim the hair around the Contact Points to make sure that contact is consistent.

4. The PetSafe QuickFit™

Collar is designed so you can quickly attach and remove the Bark Control Collar from your dog while maintaining the desired ﬁ t.

a. With the Snap Buckle

fastened, thread the collar through the Metal Buckle.

b. Slide the excess collar through the “C” Loop on

top of the Snap Buckle. This will hold the collar in place.

c. Once the collar ﬁ t is determined, simply use the

Snap Buckle to remove and replace the collar.

5. The Bark Control Collar should ﬁ t snugly, yet loose

enough to allow one ﬁ nger to ﬁ t between a Contact Point and your dog’s neck. Allow your dog to wear the collar for several minutes, then recheck the ﬁ t. Check the ﬁ t again as your dog becomes more comfortable with the Bark Control Collar.

6. Trim the collar as follows:

a. Mark the desired length of the collar with a pen. Allow for

growth if your dog is young or grows a thick winter coat.

b. Remove the Bark Control Collar from your dog and cut

off excess.

Snap Buckle

“C” Loop

Metal Buckle

Page 6

6 1-800-732-2677

ID Tag Ring

Use the ID Tag Ring to attach your dog’s ID tags to the collar. Simply place the ID Tag Ring through one of the holes on your collar. Make sure to place the Ring far enough from receiver housing so that tags will not hit the Receiver or the Contact Points.

Important: Do not attach a leash to the collar. This can result in pulling the Contact Points too tightly against your dog’s neck. Attach a leash to a separate, nonmetallic collar or harness, making sure the extra collar does not put pressure on the Contact Points.

Important: For comfort, safety and effectiveness of product, please ensure the following:

• Check the ﬁ t to prevent excessive pressure by being able to insert one ﬁ nger between the Contact Point and your pet’s skin.

• Your pet must be carefully examined daily for any signs of a rash or sore.

• If a rash or sore is observed, discontinue the use of the Bark Control Collar for a few days.

• If the condition persists beyond 48 hours, see your veterinarian.

• Your pet’s neck and the Contact Points must be washed weekly with a wash cloth and mild hand soap, then rinsed thoroughly.

A condition called Pressure Necrosis, which is a devitalization of the skin due to excessive and prolonged contact against the Contact Points, may occur if the steps above are not followed.

Page 7

www.petsafe.net 7

To Insert and Remove the Battery

Note: Do not install the battery while the Bark Control Collar is on your dog.

This Bark Control Collar utilizes a replaceable PetSafe® battery (RFA-67). This unique battery is designed to make battery replacement easier and increase water protection.

To insert the battery, align the symbols on the battery (arrow) and Bark Control Collar (triangle). Use a large coin to turn the battery clockwise until the arrow lines up with the lock symbol on the housing.

To remove the battery, turn the battery counter-clockwise using a large coin. DO NOT attempt to cut into or pry open the battery. Be sure to discard the used battery properly.

A replacement PetSafe® battery (RFA-67) can be found at many retailers. Contact the Customer Care Center at 1-800-732-2677 or visit our web site at www.petsafe.net to locate a retailer near you.

Battery Life

Average battery life is 3 to 6 months, depending on how often your dog barks. However, due to your dog’s learning process, your ﬁ rst battery may not last as long as replacement batteries.

Indicator Light

The Indicator Light acts as a low battery indicator. While in a Correction Mode, the light will ﬂ ash once every 2 to 3 seconds to indicate a low battery. While in TEST Mode, a low battery will cause the Indicator Light to turn on, and the Bark Control Collar will not respond to testing until the battery is replaced.

Page 8

8 1-800-732-2677

Modes of Operation

• Turn to the OFF Mode when the Bark Control Collar is not in use to conserve battery power.

• Begin use of the Bark Control Collar on the Low Mode and only increase to the Medium Mode if your dog does not respond.

• If your dog does not respond to the Medium Mode, increase to the High Mode.

• Turn to the TEST Mode to verify that

test

off

Low

Medium

High

Off

Test

your Bark Control Collar is working properly. Do not use this mode for

normal operation. See “To Test the Bark Control Collar.”

____________________________________________________________________

What to Expect During Use of the Bark Control Collar

Important: Do not leave your dog alone the ﬁ rst few times he receives a Static Correction.

Place the Bark Control Collar properly on your dog and wait nearby until he barks. Most dogs will understand very quickly that the Bark Control Collar is disrupting their urge to bark and will relax and stop barking. Some dogs will bark more, and as the Static Correction from the Bark Control Collar may be surprising or startling, some dogs may vocalize in response to the initial correction.

Rarely, a dog may get into a bark-correction-bark-correction cycle that could be quite overwhelming. If this happens, reassure your dog with calm, soothing tones. As your dog relaxes, he will understand that if he becomes quiet, he will not receive any more Static Corrections. The small minority of dogs that have this reaction will only have it the ﬁ rst time they wear the Bark Control Collar.

You should notice a reduction in your dog’s barking within the ﬁ rst couple of days that he wears the Bark Control Collar. At this point, some dog owners feel that the problem has been solved, but in most cases the learning process is still not complete. Most dogs will “test” this new learning experience and will increase their attempts to bark. This usually occurs during the second week a dog wears the Bark Control Collar. If this does occur, remain consistent and do not alter your use of the Bark Control Collar. You must place the Bark Control Collar on your dog in every situation when you expect him to be quiet. If your dog is not wearing the Bark Control Collar, he may resume barking and his learning would suffer a setback.

Page 9

www.petsafe.net 9

Regular Maintenance

• Check Contact Points for tightness weekly

Note: Do not adjust the factory preset Sensor Probe.

• Clean Contact Points with alcohol weekly

Note: Remove the battery and discharge the Bark Control Collar before touching the Contact Points.

• Check your dog’s neck for irritation and wash neck

weekly.

____________________________________________________________________

To Test the Bark Control Collar

Important: To avoid feeling the Static Correction yourself, never touch the two Contact Points simultaneously.

1. Turn the Mode Switch to TEST.

2. Hold the unit by the collar with the Indicator Light

facing towards you. The unit should be within 6-10 inches of your mouth.

3. In order to trigger the unit, say “Test” loudly into the

Sound Activated Sensor.

4. The Indicator Light will ﬂ ash three times to show that it

is functioning properly.

5. If the Indicator Light does not ﬂ ash, ensure that the

OFF

TEST

LOW

BAT

test

off

TEST!

battery is properly installed, and/or replace the battery. If the Indicator Light still does not ﬂ ash, contact the Customer Care Center at 1-800-732-2677.

6. Return the Mode Switch to Low before replacing the Bark Control Collar

on your dog.

Note: The TEST Mode is not intended for normal operation. If the Bark Control Collar is left in TEST Mode while on your dog, it can cause false correction and may reduce battery life.

Page 10

10 1-800-732-2677

Accessories

To purchase additional accessories for your PetSafe Deluxe Bark Control CollarTM, contact the Customer Care Center at 1-800-732-2677 or visit our website at www.petsafe.net to locate a retailer near you.

Component Part Number

Battery - two pack RFA-67D-11

If the collar breaks, you do not have to replace the whole unit. The collar is replaceable; however under normal circumstances there is no need to separate the collar and receiver. Please contact the Customer Care Center for replacement collar and instructions.

Frequently Asked Questions

Will my dog stop barking completely?

• The Bark Control Collar effectively and humanely stops all barking when it is worn. It should only be worn during periods of unwanted barking.

Will another dog’s bark set off the Bark Control Collar?

• No.

Is the Bark Control Collar safe and humane?

• Yes. The Bark Control Collar is designed to get your dog’s attention, not to punish him. However, the initial Static Correction may startle your dog.

Will the Bark Control Collar work for my dog?

• The Bark Control Collar is safe and effective for all breeds and sizes of dogs, though it may be too large for dogs under 8 pounds to wear comfortably.

Can I attach a leash to the Bark Control Collar?

• No. This can result in pulling the Contact Points too tightly against your dog’s neck. Attach a leash to a separate, non-metallic collar or a harness, making sure the extra collar does not put pressure on the Contact Points.

Page 11

www.petsafe.net 11

Troubleshooting

My dog keeps barking (does not respond to the Static Correction).

• Tighten the Bark Control Collar and/or trim your

dog’s hair where the Contact Points touch his neck to ensure good skin contact.

• Test the Bark Control Collar (see “To Test the

Bark Control Collar” section).

• Increase the Correction Mode.

• Replace the battery.

• Contact the Customer Care Center at

1-800-732-2677.

The Indicator Light keeps ﬂ ashing.

• Make sure the Mode Switch is not set to TEST.

• Replace the battery.

• If the light continues to ﬂ ash with a new battery,

contact the Customer Care Center at 1-800-732-2677.

To Discharge the Bark Control Collar

Important: Avoid touching the Contact Points unless the Bark Control Collar is completely discharged.

After removing the battery, turn the Mode Switch to TEST. The unit will discharge within 5 seconds.

Page 12

1. Terms of Use

This Product is offered to you conditioned upon your acceptance without modiﬁ cation of the terms, conditions and notices contained herein. Usage of this Product implies acceptance of all such terms, conditions, and notices.

2. Proper Use

This Product is designed for use with pets where training is desired. The speciﬁ c temperament of your pet may not work with this Product. We recommend that you not use this Product if your pet is less than 8 pounds or if your pet is aggressive. If you are unsure whether this is appropriate for your pet please consult your veterinarian or certiﬁ ed trainer.

Proper use includes reviewing the entire Guide provided with your Product and any

speciﬁ c Caution statements.

3. No Unlawful or Prohibited Use

This Product is designed for use with pets only. This pet training device is not intended to harm, injure or provoke. Using this Product in a way that is not intended could result in violation of Federal, State or local laws.

4. Limitation of Liability

In no event shall Radio Systems Corporation be liable for any direct, indirect, punitive, incidental, special or consequential damages, or any damages whatsoever arising out of or connected with the use or misuse of this Product. Buyer assumes all risks and liability from the use of this Product.

5. Modiﬁ cation of Terms and Conditions

Radio Systems Corporation reserves the right to change the terms, conditions and notices under which this Product is offered.

300-406

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

Radio Systems Corporation

10427 Electric Avenue

Knoxville, TN 37932

1-800-732-2677

www.petsafe.net

400-715