Perlick CR24F12R Specifications
CR24F | 24” FREEZER COLUMN - PANEL READY
24"
CABINET
OPENING
QUICK FEATURES
▪ Ready to accept custom or accessory stainless steel panel
(shown with stainless steel panel, le)
▪ Touch-screen control streamlines the user experience.
Customize to your temperature preference in 1° increments.
Access sengs for lighng, Sabbath mode and more with a
single touch.
▪ Brightly illuminated by white roll-on theatre lighng
▪ Sleek stainless steel interiors
▪ Open pull out bins provide quick access to frozen goods
C
PRODUCT SPECIFICATIONS
Exterior Width 23-3/4”
Appliance Dimensions
Exterior Depth 24”*
Exterior Height 83-11/16”
Cutout Width 24”
Required Cutout
Dimensions
Cutout Depth 25”
Cutout Height 84”
Depth with Door Open
Product Weight
Capacity
49-3/4” (less door overlay installed)
448 lbs
12.6 cu. .
Electrical Supply 115V, 60 Hz., 1
Phase, 2.3 amps
Electrical
Requirements
Ambient Conditions†
Electrical Service 15 amp dedicated
circuit
Power Cord/
Receptacle
NEMA 5-15
plug, 5’ /3 prong
grounding-type
F° 70 80 90
RH% 80 78 75
*Less panel. With typical 3/4” overlay panel installed, depth becomes 243/4”
US
TEMPERATURE RANGES
Main Compartment
22 1/4"
Max clearance required for
opened door is 49-3/4” when
opened to 90° (dimensions
shown are without door
overlay installed)
Factory Set to 0° (Range -10°-10°F)
23 3/4"
49 3/4"
90°
27 5/8"
† In extreme ambient condions that exceed those in the corresponding
table, condensaon may start to form on the front face of the cabinet.
Condensaon will subside as ambient temperature (F°) and relave
humidity (RH%) lower to levels shown in table.
8300 W. Good Hope Rd., Milwaukee, WI 53223 • (800) 558-5592 • perlick.com/residential
Perlick is commied to connuous improvement. Therefore, we reserve the right to change specicaons without warning.
(please note that door opens
to 105°)
FORM NO. Z2503
REV. C-03/02/2018
CR24F | 24” FREEZER COLUMN - PANEL READY
23 3/4"
49 3/4"
22 1/4"
90°
AVAILABLE MODELS
CR24F-1-2L
CR24F-1-2R
Freezer, solid overlay ready, hinged le
Freezer, solid overlay ready, hinged right
66 1/2"
27 5/8"
83 9/16"
24"
CABINET
OPENING
24"
84"
14 1/8"
10 3/4"
4"
OVERLAY TEMPLATE
1 7/8"
DIMENSIONAL LIMIT
21 5/8"
ACCESSORIES
▪ Dual installaon kits
▪ Stainless steel exterior side nishing panels
▪ Stainless steel door panels with Perlick Pro Handle
8300 W. Good Hope Rd., Milwaukee, WI 53223 • (800) 558-5592 • perlick.com/residential
Perlick is commied to connuous improvement. Therefore, we reserve the right to change specicaons without warning.
3"
4"
3"
Perlick accessories are available for purchase through an
authorized Perlick dealer. For a full list of accessories and to
nd a dealer near you, visit perlick.com/residenal.
5 1/4"
1/2"
ELECTRICAL
OUTLET
LOCATION
FORM NO. Z2503
REV. C-03/02/2018
Loading...