How it Works
Perlick
Loading...
BR72

Perlick BS60, BS108, BR48, BS84, BR96 Installation And Operation Instructions Manual

...
INSTALLATION AND OPERATION INSTRUCTIONS
CUSTOM BACK BAR CABINET — SELF CONTAINED AND REMOTE
MODEL NOS.
BS Series
BR Series
BS Series
IMPORTANT INFORMATION
To register your product, visit our web site at (www.perlick.com). Click on “Commercial”, then “Service”. You will see the link to “Warranty Registration Form”. You must complete and submit this form or the installation date will revert back to the ship Date.
This manual has been prepared to assist you in the installation of your Cabinet and to acquaint you with its operation and maintenance.
We dedicate considerable time to ensure that our products provide the highest level of customer satisfaction. If service is required, your dealer can provide you with a list of qualified service agents. For your own protection, never return merchandise for credit without our approval.
We thank you for selecting a Perlick product and assure you of our continuing interest in your satisfaction.
BR Series
Table of Contents
PREPARING THE CABINET
Specifications .....................................................2,3
List of Included Parts .............................................
Tools Required ......................................................
Plumbing ................................................................4
Electrical ................................................................
Uncrating and Inspection .......................................
Placing the Cabinet ...............................................4
Leveling the Cabinet ..............................................4
Installing Casters or Legs .....................................
Installing the Base Plate ........................................
Refrigeration and Temperature Control .................
Cleaning the Cabinet .............................................5
Cleaning Stainless Steel .......................................5
Replacement Parts ................................................
Reversing Door Hinge ...........................................
Wiring Diagram ......................................................8
4 4
4 4
4 4 5
6 7
WARNING: When lifting, the full weight of the cabinet must be supported. Lift from the cabinet base and not from the top. Improper lifting can result in severe damage to the cabinet.
Toll Free 800-558-5592 • E-Mail: Perlick@Perlick.com • www.Perlick.com
Form No. Z2278
Rev. 05.06.10
108” [2743] 4 DOOR
84” [2134] 3 DOOR 60” [1524] 2 DOOR
92” [2337] 4 DOOR 68” [1727] 3 DOOR 44” [1118] 2 DOOR
12”
[305]
5 1/8”
[130]
6 5/16”
[161]
4 1/4”
[107]
“NOTE B”
“NOTE A”
18 3/4” [476] BACK LINER
TO INSIDE OF
DOOR SILL
19 7/8”
[505]
DOOR
OPENING
23 1/2”
[597]
DOOR
OPTIONAL
FLOOR
ACCESS
KIT 2”
NOTE A: 3/4” NPT DRAIN EXIT NOTE B: 1” NPS DRAIN ACCESS
6 3/16”
[157]
24 3/4”
[629]
7 3/4”
[197]
34 1/2”
[876]
1 1/8”
[29]
7 3/16”
[182]
22 3/4”
[578]
4 3/16”
[106]
6 3/8”
[163]
31 1/4”
[794]
DOOR
HEIGHT
27 7/16”
[697]
DOOR
OPENING
R23 1/2”
Installation and Operating Instructions
Sizes and Specifications, Custom Back Bar Cabinets – Self Contained
MODEL NOS. BS60 BS84 BS108
NUMBER OF DOORS 2 Door 3 Door 4 Door CABINET Length 60” (1524) 84” (2134) 108” (2743) DIMENSIONS Depth 24 (mm) Height 34 CASE CAPACITY
(based on 12oz. Long Neck bottle) 15 24 32
CONDENSING UNIT H.P. 1 RUNNING LOAD –AMPS 6.3 8.1 8.3 SHIP WT. Lbs. (kg.) 380 (172) 490 (222) 630 (286) INTERIOR
Door sill: High strength polyethylene. Door pan and ceiling: High strength polystyrene. Floor pan and
Walls: Stainless steel. Includes pilasters, (2) vinyl coated shelves and floor rack per door, and interior lights. EXTERIOR
grille finishes
Front, back, top and sides stainless steel. Bottom galvanized steel. See optional accessories for door and
DOOR HINGING Stainless steel hinges with standard locations as illustrated. For special hinging specify hinge locations starting from left to right. Field reversible.
DOOR HARDWARE
Door handles: Choice of full length stainless steel, classic 6” black vinyl wrapped pull or top mounted
stainless steel pull tab. Lock finish: REFRIGERATION R-134a capillary tube-type. Aluminum fin and copper tube evaporator, epoxy coated coil. Adjustable
temperature control. Self-defrosting. Pull-out condensing unit for service and cleaning. Compressor left, standard.
ELECTRICAL 115V, 60Hz., 1 phase AC. Furnished with 3-prong, 6 foot NEMA5-15 PC cord. Contact Perlick for other voltage/frequency requirements.
PLUMBING Evaporator condensate is removed automatically. Optional floor drain with right end or 1” NPS out bottom come plugged from factory.
INSULATION Foamed-in-place polyurethane, 2” walls, 1 OPTIONAL
ACCESSORIES & MODIFICATIONS
• Leg set
• Beer dispensing tapping kit
• Laminated top
• Laminated ends
• Compressor right
• Brass hardware (classic & full length only)
• Caster sets
• Base plates
• Floor access kit
3
/4” (629) 243/4” (629) 243/4” (629)
1
/2” (876) 341/2” (876) 341/2” (876)
/4 1/3 1/3
chrome
3
/4” NPT at
1
/2” top.
Door finishes Black vinyl coated Stainless steel Customer choice of laminate Painted in color of choice
Grille finishes Black vinyl coated
Stainless steel Customer choice of laminate
Painted in color of choice Prepared for field lamination Glass door with black vinyl coated frame Glass door with stainless steel frame Glass door with laminated frame
Form No. Z2278 Rev. 05.06.10
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
2
Installation and Operating Instructions
23-1/2”
[597]
DOOR
R23-1/2”
6-3/16”
[157]
6-5/16”
[161]
4-1/2”
[107]
OPTIONAL
FLOOR
ACCESS
KIT 2”
5-1/8”
[130]
19 7/8”
[505]
DOOR
OPENING
18-3/4” [476] BACK LINER
TO INSIDE OF
DOOR SILL
NOTE “A” 3/4” NPT DRAIN EXIT NOTE “B” 1” NPS DRAIN ACCESS
6-3/8”
[163]
7-3/4”
[197]
24-3/4”
[629]
7-3/16”
[182]
34 1/2”
[876]
4-3/16”
[106]
22-3/4”
[578]
NOTE “A”
NOTE “B”
1-1/8”
[29]
3-7/16”
[87]
31-1/4”
[794]
DOOR
HEIGHT
27-7/16”
[697]
DOOR
OPENING
96” [2439] 4 DOOR 72” [1829] 3 DOOR 48” [1219] 2 DOOR
92” [2337] 4 DOOR 68” [1727] 3 DOOR 44” [1118] 2 DOOR
REFRIGERATION &
ELECTRICAL ACCESS
RIGHT OR LEFT
Sizes and Specifications, Custom Back Bar Cabinets – Remote
MODEL NOS. BR48 BR72 BR96
NUMBER OF DOORS 2 Door 3 Door 4 Door CABINET Length 48” (1219) 72” (1829) 96” (2439) DIMENSIONS Depth 24 (mm) Height 34 CASE CAPACITY
(based on 12oz. Long Neck bottle) 15 24 32
AMPS 1.6 2.0 2.5 EVAPORATOR CAPACITY @ 20° F (BTU/HR) 1900 2300 2300 SHIP WT. Lbs. (kg.) 310 (140) 400 (181) 540 (245) INTERIOR
Door sill: High strength polyethylene. Door pan and ceiling: High strength polystyrene.
Floor pan: Stainless steel. Includes pilasters, (2) vinyl coated shelves and floor rack per door, and interior lights. EXTERIOR Front, back, top and sides, stainless steel. Bottom galvanized steel. See optional accessories for door finishes. DOOR HINGING Stainless steel hinges with standard locations as illustrated. For special hinging specify
hinge locations starting from left to right. Field reversible. DOOR HARDWARE
Door handles: Choice of full length stainless steel, classic 6” black vinyl wrapped pull or top mounted
stainless steel pull tab. Lock finish: REFRIGERATION Aluminum fin and copper tube evaporator, epoxy coated coil. Factory installed expansion valve. Choice of R22
or R404A. Copper tube connection stubbed out left side of evaporator assembly. Suction line accepts copper tubing. Liquid line accepts
ELECTRICAL 115V, 60Hz., 1 phase AC. Contact Perlick for other voltage/ frequency requirements. PLUMBING Independent floor drain or condensate evap. pan is req’d. Optional 2 INSULATION Foamed-in-place polyurethane, 2” walls, 1 OPTIONAL • Leg set • Brass hardware Door finishes
ACCESSORIES & • Tapping kit (classic and full length only) Black vinyl coated MODIFICATIONS • Laminated top • Caster sets Stainless steel
• Laminated ends • Base plates Customers choice of laminate
• Floor access kit Painted in color of choice Prepared for field lamination Glass door with black vinyl coated frame
Glass door with stainless steel frame Glass door with laminated frame
3
/4” (629) 243/4” (629) 243/4” (629)
1
/2” (876) 341/2” (876) 341/2” (876)
chrome
1
/4” O.D. copper tubing.
1
/8” I.D. floor access kit-left rear corner.
1
/2” top.
3
/8” O.D.
Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
3
Form No. Z2278
Rev. 05.06.10
Loading...
+ 5 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use