Pentax PHOTO BROWSER 3.10, PHOTO LABORATORY 3.10 Operators Manual

Operating Manual

(Version 3.10)

Thank you for purchasing this PENTAX Digital Camera. This is the manual for “PENTAX PHOTO Browser 3” and “PENTAX PHOTO Laboratory 3” software for your Windows PC or Macintosh for enjoying images created with your camera. Please read the separate camera operating manual and this manual before using your camera, “PENTAX PHOTO Browser 3”, or “PENTAX PHOTO Laboratory 3”, in order to get the most out of all the features and functions. Keep the camera operating manual and this manual safe, as they can be valuable tools in clarifying and helping you to understand all the camera’s capabilities.

Regarding copyrights

Images taken using this camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are even cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.

Regarding trademarks

• PENTAX and smc PENTAX are trademarks of PENTAX Corporation.

• PENTAX PHOTO Browser, PENTAX PHOTO Laboratory, PENTAX REMOTE Assistant are trademarks of PENTAX Corporation.

• SD logo and SDHC logo are trademarks.

• All other brands or product names are trademarks or registered trademarks of their respective owners.

Regarding PictBridge

PictBridge allows the user to connect the printer and digital camera directly, using the unified standard for the direct printout of images. You can print images directly from the camera through a few simple operations.

Disclaimer

• PENTAX is not responsible for any damages resulting from the direct or indirect use of this software or repercussive damages, damage to data, programs or other intangible property, loss of profit or anticipated profit, or dispute with a third party resulting from the use of this software.

• The specifications of this software are subject to change without notice.

Symbols used in this manual have the following meanings:

Gives information that is useful to know.

Gives cautions and notes about the operation.

The screen pictures shown in this manual may differ depending on the type of computer used.

Contents

Enjoying Your Digital Camera Pictures ............................. 2

Provided Software ............................................................... 4

Software Provided....................................................................................4

System Requirements..............................................................................5

Installing the Software......................................................... 7

When Using Windows..............................................................................7

When Using Macintosh ............................................................................9

Saving Images on Your Computer ................................... 11

Saving Images by Connecting Your Camera and Computer (For

Windows) ...............................................................................................11

Saving Images by Connecting Your Camera and Computer (For

Macintosh)..............................................................................................16

Other Methods for Saving Images .........................................................18

PENTAX PHOTO Browser 3 .............................................. 19

Opening PENTAX PHOTO Browser 3 ...................................................19

About the PENTAX PHOTO Browser 3 Window....................................20

Transferring Images...............................................................................31

Viewing Images......................................................................................32

Main Image View Window......................................................................36

Managing Image Files and Folders........................................................47

Saving a List of Image Data...................................................................53

Continuous Image Playback in a Slideshow ..........................................55

Printing an Image...................................................................................58

Changing the PENTAX PHOTO Browser 3 Settings .............................65

PENTAX PHOTO Laboratory 3.......................................... 71

Opening PENTAX PHOTO Laboratory 3 ...............................................71

About the PENTAX PHOTO Laboratory 3 Window................................73

Selecting a RAW File to Process ...........................................................80

Easily Modifying RAW Files ...................................................................84

Setting RAW File Processing Conditions...............................................85

Saving Image Files.................................................................................90

Saving Image File Adjustment ...............................................................91

Recalling Image File Adjustment............................................................92

Printing...................................................................................................93

Changing the PENTAX PHOTO Laboratory 3 Settings .........................99

Glossary............................................................................ 103

Enjoying Your Digital Camera Pictures

You can use a computer to organize and edit the pictures captured with your digital camera.

Direct Print

Connect your camera directly to a PictBridge-compatible printer using the USB cable. (Not available on w.)

Your computer is...

• equipped with a standard USB interface.

View and record images on AV equipment

Connect your camera to a TV, DVD recorder or other audiovisual equipment using an AV cable to view and/or record images.

• using Windows 2000/XP or Mac OS X Ver. 10.2 or later.

Connect your camera to a computer using the USB cable to copy the camera images to a computer.

Use your photo shop

You can have prints made from images recorded on your card at a photo shop.

• Set DPOF settings on your camera, and get prints from your photo shop.

• Select the images for prints.

You can transfer your images using a built-in card slot + PC card adapter or a card reader.

• Remove the card from the camera. When transferring images on the card to a computer with another device, make sure to review the user manual accompanying that device.

Use your image data

You can use your e-mail software to attach and send images by e-mail, or post the images on your website.

• See the operating manual of your e-mail software for details on how to make attachments to e-mails.

• See the operating manual of the software you are using for details on how to use images on your website.

PENTAX PHOTO Browser 3 (p.19 - p.70) PENTAX PHOTO Laboratory 3 (p.71 - p.102)

• View images • Organize and save images

• Print images • Rename all

• Save all image data

•

PENTAX-specification RAW file processing*

Use a commercially-available image editing software to perform image editing operations.

* You can also perform file processing

operations for DNG files taken with PENTAX digital cameras, DNG files converted with PENTAX PHOTO Browser 3, and DNG files taken with PENTAX digital cameras and converted with Adobe DNG converter.

You can use your printer to print images transferred to your computer. Some printers can print directly from SD Memory Cards.

• For details, see the

Use your printer

operating manual of the printer you are using.

Save your image data

Images transferred to the computer can be saved onto a CD-R or other media.

Provided Software

The provided CD-ROM (S-SW55) contains the following software:

• PENTAX PHOTO Browser 3

• PENTAX PHOTO Laboratory 3

This manual describes PENTAX PHOTO Browser 3 and PENTAX PHOTO Laboratory 3 with screen images from Windows XP. The operation of these software applications is nearly the same on Macintosh with the exception of some keys. For information on Macintosh-specific instructions, see the sections labeled “For Macintosh” or the online help.

Software Provided

PENTAX PHOTO Browser 3

PENTAX PHOTO Browser 3 is software for viewing, printing and managing images taken on your digital camera and saved on your computer. Files with extensions .bmp (BMP), .jpg (JPEG), .pef (Files recorded in PENTAX's exclusive digital-camera CCD RAW format. Hereafter “PEF”), .pct (PICT), .png (PNG), .tif (TIFF) and .dng (DNG) are supported.

PENTAX PHOTO Browser 3 can perform the following tasks:

• Save image files under the same or a new name, change file names and file types, copy, cut, paste, rotate and delete.

• Create new folders, change folder names, copy, cut, delete and paste.

• Save image data list.

• Check image data.

• View PEF files and DNG files easily.

• Print images.

You can also start PENTAX PHOTO Laboratory 3 and PENTAX REMOTE Assistant

*1: PENTAX REMOTE Assistant can only be used together with w.

from within PENTAX PHOTO Browser 3.

PENTAX PHOTO Laboratory 3

This application supports a number of image processing functions for use with PEF and DNG files including data conversion, color adjustment, and image compensation, and further allows you to save these images in formats compatible with other commercial image browsing and editing software. You can also print PEF and DNG files. PENTAX PHOTO Laboratory 3 can also be run as a standalone application.

You can only perform image processing operations for DNG files taken with PENTAX digital cameras and DNG files converted with PENTAX PHOTO Browser 3.

DNG (Digital Negative) is a general-purpose, publicly-available RAW file format designed by Adobe Systems.

System Requirements

We recommend the following system requirements to transfer images from your camera to a computer and to install and use PENTAX PHOTO Browser 3 and PENTAX PHOTO Laboratory 3.

Windows System Requirements

USB Connection

• Computer with Windows 2000/XP (Home Edition/Professional) preinstalled.

• USB port must be standard equipment.

Application Software

< PENTAX PHOTO Browser 3 and PENTAX PHOTO Laboratory 3 > (9 languages: English, French, German, Spanish, Italian, Russian, Chinese [traditional and simplified], Korean, Japanese)

• Operating System: Windows 2000/XP (Home Edition/Professional)

• CPU : Pentium 4 or higher

(Pentium 4 2.0 GHz or higher recommended)

• RAM : 512 MB or more (1.0 GB or more recommended)

• Monitor : 1024×768 pixels or more (1280×1024 pixels or more

recommended) with 24-bit full color (approximately

16.77 million colors)

• Free Disk Space : 250 MB or more (500 MB or more recommended)

We recommend using AC adapter (sold separately) when the camera is connected to the computer. If the batteries become depleted during image transfer, the image data or SD Memory Card may be damaged.

Macintosh System Requirements

USB Connection

•

Macintosh with Mac OS X 10.2 or later preinstalled.

• USB port must be standard equipment.

* Installation of the USB driver is not necessary.

Application Software

PENTAX PHOTO Browser 3 and PENTAX PHOTO Laboratory 3 (9 languages: English, French, German, Spanish, Italian, Russian, Chinese [traditional and simplified], Korean, Japanese)

• Operating System : Mac OS X 10.2 or later

• CPU : PowerPC G4 or higher

(Intel Core processor or PowerPC G5 recommended. Universal Binary format)

• RAM : 512 MB or more (1.0 GB or more recommended)

• Monitor : 1024×768 pixels or more (1280×1024 pixels or more

recommended) with 24-bit full color (approximately

16.77 million colors)

• Free Disk Space : 250 MB or more (500 MB or more recommended)

We recommend using AC adapter (sold separately) when the camera is connected to the computer. If the batteries become depleted during image transfer, the image data or SD Memory Card may be damaged.

Installing the Software

Here is the procedure for installing PENTAX PHOTO Browser 3 and PENTAX PHOTO Laboratory 3. PENTAX PHOTO Browser and PENTAX PHOTO Laboratory can overwrite earlier versions of this software supplied with w, J, L, U, F, q and r. Make sure to install PENTAX PHOTO Browser 3 and PENTAX PHOTO Laboratory 3 on the provided CD-ROM (S-SW55) in order to use RAW files shot with the q. When multiple accounts have been setup in Windows 2000/XP or Mac OS X, log on with an account that has administrative rights before installing the software.

When Using Windows

Turn your computer on.

Close any other software that is open.

Place the provided CD-ROM (S-SW55) into the CD-ROM drive on your computer.

The PENTAX Software Installer screen appears.

• If the PENTAX Software Installer screen does not appear

Display the PENTAX Software Installer screen following the steps below.

1) Click [My Computer] from the start menu.

2) Double-click the [CD-ROM drive (S-SW55)] icon.

3) Double-click [Setup.exe].

You can choose the languages from the displayed screen.

The software selection screen appears.

Click [PENTAX Digital Camera Utility].

Select the desired language in the Select Language screen and click [OK].

Some operating environments select the language automatically. Continue with the installation in step 6. The installer starts.

The installer starts. Click [Next].

Follow the instructions on the screen and continue with the installation.

Product Registration on the Internet

To better serve you, please take a moment to register your software.

Please click [Product Registration] on the software selection screen in step 4 (p.8). A world map for Internet Product Registration is displayed. If your computer is connected to the Internet, click the displayed country or region and then follow the instructions to register your software.

When Using Macintosh

Turn on your Macintosh.

Close any other software that is open.

Place the provided CD-ROM (S-SW55) into the CD-ROM drive on your Macintosh.

Double-click the [CD-ROM drive (S-SW55)] icon.

The contents of the CD-ROM are displayed.

Double-click the [PENTAX Installer] icon.

The PENTAX Software Installer screen appears.

You can choose the languages from the displayed screen.

The software selection screen appears.

Click [PENTAX Digital Camera Utility].

Follow the instructions on the screen and continue with the installation.

Product Registration on the Internet

To better serve you, please take a moment to register your software.

Please click [Product Registration] on the software selection screen in step

6. Next, follow the instructions on the screen to register your software

(p.9).

Saving Images on Your Computer

Here is the procedure for saving images captured with your digital camera onto your computer. This section describes the method for saving images by connecting your camera and computer with the USB cable, as well as other methods.

Saving Images by Connecting Your Camera and Computer (For Windows)

Setting [Transfer Mode] on the Camera to [PC]

not need to be set. Go to “Connecting Your Camera to Your Computer” (p.12).

2 3 4

is used as an example here. When using

Press the 3 button on the camera.

The [A Rec. Mode] menu or the [Q Playback] menu appears.

Press the four-way controller (5) to display the [H Set-up] menu.

Use the four-way controller (

Press the four-way controller (5).

A pull-down menu appears.

Use the four-way controller (23) to select [PC].

[Transfer Mode] settings depend on the connected device.

When connecting to a computer:

[PC] = USB 2.0 (Hi-Speed USB

compatible)

[PC-F] = USB 1.1

When printing with a printer:

[PictBridge] (only for compatible printers)

, [Transfer Mode] does

) to select [Transfer Mode].

Set-up

Guide display Brightness Level Video Out Transfer Mode Auto Power Off Folder Name

Cancel

3 sec

0 NTSC PC PictBridge PC-F

Press the 4 button on the camera.

• Do not connect the camera to your computer while [PictBridge] is selected for the [Transfer Mode].

• If the USB transmission speed of the computer is slower than that of the camera, an error may occur when transferring data. If this occurs, set the Transfer Mode to [PC-F]. This sets the transfer speed to the USB 1.1 data transfer rate, thereby reducing the possibility of an error.

Connecting Your Camera to Your Computer

Turn your computer on.

Turn off your camera and use the USB cable to connect your camera and your computer.

Confirm that an SD Memory Card is inserted into your camera.

Turn your camera on.

The camera is recognized as a [Removable Disk] in [My Computer].

• If the [Removable Disk Drive] dialog appears in Windows XP, select [Open folder to view files using Windows Explorer] and click [OK]. The window in step 3 on p.13 appears.

• When using Windows XP, if the SD Memory Card has a volume label, the content of the volume label name appears instead of [Removable Disk]. A new unformatted SD Memory Card may show the manufacturer name or model number.

Saving Camera Images on Your Computer

Windows XP is used as an example here.

Click [My Computer] from the start menu.

Double-click the [Removable Disk] icon.

Double-click the [DCIM] icon.

The [xxxPENTX] (xxx is a three-digit number) folder appears.

The camera image files are in this folder.

When the method for assigning folder names is set to [Date], the [xxx_MMDD] folder (where MMDD is the shooting date) appears. (p.178 of the camera Operating Manual)

Drag and drop the [xxxPENTX] or the [xxx_MMDD] folder to the desktop or any desired folder, such as the [My Documents] folder.

The camera images are saved on your computer as an entire folder.

Images can also be saved using the [Easy Image Transfer] function in PENTAX PHOTO Browser 3. (p.31)

Disconnecting Your Camera from Your Computer

Windows XP

Double-click the [Safely Remove Hardware] icon in the task bar.

The [Safely Remove Hardware] screen appears.

Confirm that [USB Mass Storage Device] is selected and then click [Stop].

The [Stop a Hardware device] screen appears.

Select [USB Mass Storage Device] and click [OK].

A message appears indicating that the hardware can be safely removed.

Click [Close].

Turn off the camera and disconnect the USB cable from your camera and computer.

Windows 2000

Double-click the [Unplug or Eject Hardware] icon in the task bar.

The [Unplug or Eject Hardware] screen appears.

Confirm that [USB Mass Storage Device] is selected and then click [Stop].

The [Stop a Hardware device] screen appears.

Select [USB Mass Storage Device] and click [OK].

A message appears indicating that the hardware can be safely removed.

Click [OK].

Click [Close] and then, turn off the camera and disconnect the USB cable from your camera and computer.

The USB mass storage device will not stop when the files stored on the removable disk are in use for applications.

Saving Images by Connecting Your Camera and Computer (For Macintosh)

Setting the USB Connection Mode to [PC]

When using q, q and r, set the [Transfer Mode] on the camera to [PC] (p.11). When using w, [Transfer Mode] does not need to be set. Proceed to the following steps.

Connecting the Camera and Macintosh

Turn on your Macintosh.

Turn off your camera and use the USB cable to connect your camera and your Macintosh.

Confirm that an SD Memory Card is inserted into your camera.

Turn your camera on.

Your camera is recognized on the desktop as [NO_NAME (or the volume label of the SD Memory Card if one is registered)].

You can change the folder name.

When the iPhoto screen appears, close it.

Saving Camera Images on Your Macintosh

Mac OS X (ver. 10.3) is used as an example here.

Double-click the [NO NAME] icon on the desktop.

Double-click the [DCIM] icon.

The [xxxPENTX] (xxx is a three-digit number) folder appears.

The camera image files are in this folder.

When the method for assigning folder names is set to [Date], the [xxx_MMDD] folder (where MMDD is the shooting date) appears. (p.176 of the camera Operating Manual)

Double-click the [Macintosh HD] icon on the desktop.

This opens the [Macintosh HD] volume.

Drag the [xxxPENTX] or [xxx_MMD] folder to [Macintosh HD] volume or any other volume or folder.

The complete folder, containing all images, is saved to the destination volume or folder.

Images can also be saved using the [Easy Image Transfer] function in PENTAX PHOTO Browser 3. (p.31)

Disconnecting Your Camera from Your Macintosh

Drag [NO NAME (or the volume label name on the SD Memory Card)] on the desktop to the trash can.

Turn off the camera and disconnect the USB cable from your camera and Macintosh.

Other Methods for Saving Images

Use a card reader or card adapter to send image files directly to your computer from an SD Memory Card with saved images without connecting your camera and your computer with a USB cable. (p.31) For details, please refer to the user’s manual for your computer or card reader.

PENTAX PHOTO Browser 3

This section describes opening and closing PENTAX PHOTO Browser 3 and viewing the PENTAX PHOTO Browser 3 window, and explains its functions.

Opening PENTAX PHOTO Browser 3

For Windows

Select the start menu on the desktop.

Select [All Programs] - [PENTAX Digital Camera Utility] - [PENTAX PHOTO Browser].

PENTAX PHOTO Browser 3 is opened and the PENTAX PHOTO Browser 3 window appears.

Closing PENTAX PHOTO Browser 3

Select [Exit] from the [File] menu.

For Macintosh

Double-click the [PENTAX Digital Camera Utility] folder in [Applications] on the hard disk.

Double-click the [PENTAX PHOTO Browser] program icon.

PENTAX PHOTO Browser 3 is opened and the PENTAX PHOTO Browser 3 window appears.

Closing PENTAX PHOTO Browser 3

Select [Quit PENTAX PHOTO Browser] in [PENTAX PHOTO Browser] on the desktop menu bar.

About the PENTAX PHOTO Browser 3 Window

This section explains the PENTAX PHOTO Browser 3 window layout, names and functions.

Tool barMenu bar

Folder tree pane Address bar

Preview pane

Image data pane

Thumbnail pane

Checked images pane

Status bar

Menu bar (p.24)

Tool bar (p.28)

Address bar

The address of the currently displayed folder appears here.

Folder tree pane

Internal data on your computer appears here as a folder tree. Select the folder containing saved image files here. Also, the Folder tree pane handles operations such as creating new folders, deleting folders and moving/copying folders.

Thumbnail pane

Files in the folder selected in the Folder tree pane appear here. Select from five file display methods. When a thumbnail image is selected in the Thumbnail pane, the image appears in the Preview pane and the image data appears in the Image data pane.

Checked images pane

All images with check marks in the Thumbnail pane are displayed here. Switch between Thumbnails and Details by right-clicking the Checked images pane. When a thumbnail image is selected in the Checked images pane, the image appears in the Preview pane and the image data appears in the Image data pane.

Preview pane

An image selected in the Thumbnail pane appears in this pane.

Image data pane

The image data for the image selected in the Thumbnail pane appears here. Place the cursor over a cell dividing line at the top of the pane and drag it to resize the cell. (For Macintosh, drag at the applicable position to resize the cell.) The following items appear:

Data Contents Example Lens name Shows lens type

Focal length Focal length (in mm) Shutter speed Shutter speed when shooting

(in seconds) Aperture Aperture value when shooting Capture mode Capture mode when shooting Green mode Metering mode Metering mode when shooting Multi-segment White balance White balance mode Auto Color temperature Color temperature (units: Kelvin)

Fine tune A-B Amber - Blue fine tune Fine tune M-G Magenta - Green fine tune Sensitivity ISO sensitivity when shooting Recorded pixels Number of recorded pixels Quality Recorded quality Better

Exposure compensation

*1: Setting details when shooting with q or processing details when using

PENTAX PHOTO Laboratory 3 appear.

Exposure compensation

smc PENTAX-FA 50mmF1.4

50mm 1/250sec

F8.0

-----

----200

3872×2592

0.0

Data Contents Example Autofocus mode Autofocus mode when shooting Single AF

Autofocus area mode Autofocus area mode when shooting Automatic Color space Color space mode Image tone Photo finish settings Bright Saturation Saturation settings 0 Sharpness Sharpness settings 0 Contrast Contrast settings 0

Drive mode Drive mode settings when shooting Single-frame

Flash mode Flash mode settings when shooting Flash Off Bracket Exposure bracket settings when

shooting Extended Bracket Extended bracket settings when

shooting Multi-exposure Multi-exposure settings when shooting Shake Reduction Shake Reduction Setting Firmware/Software

version Shooting Date/Time Date and time shot

Camera model Camera name

*2: The range of the variable appears after the name of the item, such as

[Saturation], set during shooting.

*3: Information on the camera’s firmware appears for captured images.

Version of the software when images

were last saved

Status bar

The status of PENTAX PHOTO Browser 3 appears. The following items appear:

• Number of objects in the selected folder, total folder size (not including subfolders) or number of selected objects and total size

• Available disk space for selected drive

• Progress status when loading thumbnails

• Identification of local disk, removable disk and network

sRGB

shooting

Off

-----

Off On K10D Ver 1.00

10/14/2006 10:00:00

PENTAX K10D

Showing/Hiding Panes and Bars

Show/hide panes and bars using the [View] menu (p.25). A check is displayed in the box ( ) in front of the item for currently showing items. Check these to show and uncheck to hide. Alternatively, click the [Close] button ( ) on the top right of each pane to close.

Removing and Moving the Tool Bar and Address Bar

The Tool bar and Address bar can be removed or moved from the Browser screen.

Remove the Tool bar and Address bar

To remove a bar, double-click the left edge of the bar in the Browser screen. Alternatively, click the left edge of the bar and drag to the Thumbnail pane or Folder tree pane. The bar is removed from the Browser screen.

Add the Tool bar and Address bar in the Browser screen

Double-click the bar to return the bar to the original location. Alternatively, drag the bar back to the original location. The bar returns to the Browser screen.

Move the Tool bar and Address bar

Click the left edge of the bar and drag to the new location. The bar is moved to the new location.

The Address bar can only be moved below the Menu bar, next to the Tool bar, or to the top/bottom of the Thumbnail pane.

Select [Default Position] on the [View] menu or click (Default Position) on the Tool bar to return the bar to its default position.

Removing and Moving Panes

The Folder tree pane, Preview pane, Image data pane and Checked images pane can be removed from the Browser screen.

Remove panes

To remove a pane, double-click the top edge of the pane in the Browser screen. Alternatively, click the top edge of the pane and drag to the Thumbnail pane. The pane is removed from the Browser screen.

Add a pane in the Browser screen

Double-click the Title bar of the pane to return to the original location. Alternatively, click the Title bar and drag the pane back to the original location. The pane returns to the Browser screen.

Move panes

To move a pane, select pane and drag to the new location. The pane is moved to the new location.

Select [Default Position] on the [View] menu or click (Default Position) on the Tool bar to return the bar to its default position.

Menu Bar

This executes functions or sets various settings of PENTAX PHOTO Browser 3. For Macintosh, the Menu bar appears at the top of the desktop.

[File] menu

Create New Folder This creates a new folder in the location specified on

the Folder tree pane. (p.52)

Open This opens the selected folder. For an image

selected in the Thumbnail pane, it displays the image in a new Main image view window.

Close All This closes all images open in the Main image view

windows.

Rename This changes the name of the selected file or folder.

(p.50)

Rename All This changes the names of all selected files. (p.51)

Page Setup This sets printing options such as margins, headers/

footers, and number of copies. (p.62)

Print This prints the selected image file. (p.58)

Properties The properties of the selected file or folder appear.

(p.54)

Exit This closes PENTAX PHOTO Browser 3.

(For Macintosh, select [Quit PENTAX PHOTO Browser] on the [PENTAX PHOTO Browser] menu.)

[Edit] menu

Undo This undoes the previous file operation.

Cut This prepares the selected file or folder to be moved

to a different location. (p.48)

Copy This copies the selected file or folder. (p.48)

Paste This copies the cut or copied file or folder into the

selected folder. (p.48)

Delete This deletes the selected file or folder. When a folder

is deleted, all files in the folder are also deleted. (p.50)

Move to Folder This moves the selected file to another folder.

Copy to Folder This copies the selected file to another folder.

Check Selected Image This checks the selected file. The checked file is

displayed in the Checked images pane. (p.34)

Uncheck Selected Image This unchecks the selected file.

Uncheck All This unchecks all images.

Select All This selects all files within the currently open folder.

Invert Selection This unselects all selected files and selects all

unselected files within the currently open folder.

[View] menu

Tool Bar This shows or hides the Tool bar.

Folder Tree This shows or hides the Folder tree pane.

Preview This shows or hides the Preview pane.

Address Bar This shows or hides the Address bar.

Status Bar This shows or hides the Status bar.

Image Data This shows or hides the Image data pane.

Checked Images This shows or hides the Checked images pane.

Default Position This returns each pane to its default position.

Filter This sets the type of file that appears in the

Thumbnail pane. Select from the following four items: PENTAX Images : Images captured with your

PENTAX camera

Other Images : Images other than those captured

with your PENTAX camera (DNG,

JPEG, TIFF, BMP, PNG, PICT) Folders : Folders Others : Files that PENTAX PHOTO

Browser 3 does not support

[View] menu

Sort by This specifies the order in which files and folders

appear in the Thumbnail pane and specifies ascending or descending order. You can select from File Name, File Size, File Date/ Time, File Type, Shooting Date/Time, Image Size, Camera Name, Lens Name, Checkmark and Lock Status.

Thumbnail Caption This sets the caption of file that appears in the

Thumbnail pane. File Name, File Date and File Time appear by default.

Thumbnail (Smallest) The smallest size thumbnail appears in the

Thumbnail pane.

Thumbnail (Small) A small size thumbnail appears in the Thumbnail

pane.

Thumbnail (Medium) A medium size thumbnail appears in the Thumbnail

pane.

Thumbnail (Large) A large size thumbnail appears in the Thumbnail

pane.

Details Image details appear in the Thumbnail pane without

an image.

Detailed View Options Sets the information displayed in the Thumbnail pane

when set to [Details].

Go To Select [Back] to return to the previously opened

folder, [Forward] to move forward one folder, and [Up] to move up one folder in the directory tree.

Slideshow Selected or checked images appear in order. (p.55)

If only one image is selected or no images are selected (click the background of the Thumbnail pane), all images in the current folder are displayed in order.

[Tool] menu

Save Image Data List Use the check boxes to save the image data from

multiple folders into one CSV format file. If no images are selected or checked, all the image data in the current folder is saved. (p.53)

Rotate Rotates the selected image 90° left or right. (p.35)

Extract JPEG Extracts the JPEG data from a selected PEF file or

DNG RAW file (shot with q) and saves it as a separate file.

Save as DNG Converts a selected PEF file into a DNG RAW file.

[Tool] menu

Easy Image Transfer Automatically searches for DCF images recorded in

the camera or SD Memory Card connected to the computer and copies the images to the computer. (p.31)

PENTAX PHOTO Laboratory

PENTAX REMOTE Assistant

Options This sets various settings for PENTAX PHOTO

[Help] menu

Help Topics This shows PENTAX PHOTO Browser 3 help

Index This shows PENTAX PHOTO Browser 3 help index

What’s This? This shows pop-up tips when an icon or command

About PENTAX PHOTO Browser

*1: PENTAX REMOTE Assistant is not included in the CD-ROM (S-SW55). The

latest version can be downloaded from the PENTAX website. This menu function can be used if PENTAX REMOTE Assistant is already installed.

This starts PENTAX PHOTO Laboratory 3. You can specify the image files to be opened from PENTAX PHOTO Browser 3. (p.80)

This starts PENTAX REMOTE Assistant. PENTAX REMOTE Assistant can be used by installing it in the same folder as PENTAX PHOTO Browser 3 and using it together with the w.

Browser 3. (p.65)

contents.

search. (This command is not available for Macintosh.)

button is clicked.

This shows PENTAX PHOTO Browser 3 version information. (For Macintosh, select [About PENTAX PHOTO Browser] on the [PENTAX PHOTO Browser] menu.)

Tool Bar

Frequently used functions are provided as Tool bar buttons. You can execute these functions easily from the Tool bar. If, after resizing the Browser screen, part of the Tool bar is not visible, you can click the downward pointing arrow on the right edge of the Tool bar to select a tool that is not displayed.

1 2 3 4 5 6 7 8 9 10 11 12 13

14 15 16 17 18 19 20 21 22 23 24 25 26 27

Number Icon (button) Content

Back

Forward

This opens the previously opened folder. Click the downward pointing arrow to the right of the [Back] icon to display a history of previously opened folders. (For Macintosh, hold down this icon to display the history.)

This opens the folder which was open before using the [Back] button. Click the downward pointing arrow to the right of the [Forward] icon to display a history of previously opened folders. (For Macintosh, hold down this icon to display the history.)

This moves up one folder in the directory tree.

Rename All

Undo

This changes the names of all selected files. (p.51)

This prints the selected image file. (p.58)

This undoes the previous file operation.

+ 78 hidden pages