Pentair Everpure PF-i4000 User Manual

B E N E F I T S

A P P L I C A T I O N / S I Z I N G

I N S T A L L A T I O N T I P S

O P E R A T I O N T I P S

EV9325-23

Insurice Triple PF-i4000² System

Delivers premium quality water for ice applications

Insurice Triple PF-i4000² System: EV9325-23

i4000² Replacement Cartridge: EV9612-32

EC210 Prefilter Cartridge: EV9534-26

Reduces ice machine problems caused by scale
build-up from dirt and dissolved minerals (as
tested by Everpure)

New and improved Micro-Pure II media inhibits
the growth of bacteria

Reduces chlorine taste and odor and other
offensive contaminants

Self-contained scale inhibitor feed keeps ice
machines functioning at full capacity (as tested
by Everpure)

Reduces maintenance and service costs by
reducing scale* and clogging of distribution lines,
evaporator plate and pump (*as tested by
Everpure)

Precoat submicron technology reduces dirt and
particles as small as 1/2 micron in size and
reduces health contaminants such as cysts

20" prefilter reduces dirt and particles
Manifold features water shut off, flushing valve

and outlet pressure gauge
Sanitary cartridge replacement is simple, quick

and clean. Internal filter parts are never exposed
to handling or contamination

NSF Certified under NSF/ANSI Standards 42
& 53

Choose a mounting location suitable to support
the full weight of the system when operating

Never use saddle valve for connection

Use 3/4” water line

Do not connect system to water-cooled
condenser

Install vertically with cartridges hanging down
and allow 2-1/2” clearance below the cartridge
for easy cartridge replacement

Flush cartridges by running water through system
for five minutes at full flow

Change cartridges on a regular 6 month
preventative maintenance program

Change cartridges when capacity is reached or
when pressure falls below 10 psi

Service flow rate must not exceed 5.0 gpm

Always flush the filter cartridge at time of
installation and cartridge change

Inspect EC210 cartridge periodically to determine
dirt load

Replace EC210 cartridge when dirt has penetrated
through to the inner core of the cartridge

For ice machine applications

Higher volume, higher flow and higher capacity
ice machines

Rated Capacity: 36,000 gallons

Overall Dimensions:

29.59”H x 25.75”W x 6”D

Inlet connection: 3/4”

Outlet connection: 3/4”

Service Flow Rate:
Maximum 5.0 gpm (18.9 Lpm)

Rated Capacity: 36,000 gallons

Pressure Requirements:
10 - 125 psi (0.7 – 8.6 bar), non-shock

Temperature: 35 - 100°F (2 - 38°C)

Insurice Triple PF-i4000² System

i4000² Precoat Replacement Cartridge

No electrical connection required

Shipping Weight: 23 lbs.

Operating Weight: 35 lbs.

The contaminants or other substances
removed or reduced by this drinking water
system are not necessarily in your water. Do
not use with water that is microbiologically
unsafe or of unknown quality without
adequate disinfection before or after the
system. Systems certified for cyst reduction
may be used with disinfected water that may
contain filterable cysts.

Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.

System Tested and Certified by NSF
International against ANSI/NSF
Standard 42 and 53 for the reduction of:

Standard No. 42: Aesthetic Effects
Chemical Unit
Taste and Odor Reduction
Chlorine Reduction, Class I
Mechanical Filtration Unit
Nominal Particulate Reduction,
Class I:

97.9+% reduction of particles
one-half micron and larger in size
Standard No. 53: Health Effects
Mechanical Filtration Unit
Cyst Reduction