Pentair Everpure Kleensteam CT User Manual
BENEFITS
APPLICATION/SIZING
INSTALLATION TIPS
OPERATION TIPS
EV9797-50
Kleensteam CT
Total water treatment system for steam applications
Kleensteam CT System: EV9797-50
Kleensteam CT System: EV9797-50
4CB5 Replacement Cartridge: EV9617-11
4CB5 Replacement Cartridge: EV9617-11
SS-10 Cartridge: EV9799-02
SS-10 Cartridge: EV9799-02
A total system delivering high quality filtered
water with cleaning and deliming capabilities
Sophisticated Hydroblend compound prevents
limescale formation in high temperature steam
applications
Fine filters incoming water to improve the
performance, maximize energy efficiency and
increase the life of steam equipment
Reduces chlorine-induced corrosion
System is simple to install, operate and maintain
Easy deliming with Everpure's ScaleKleen, which
is fed directly into the boiler through the SR-X
bowl without boiler disassembly or the use of
dangerous acids
Longer lasting SS-10 cartridge is more effective
in higher alkalinty/hardness/TDS/temperature
installations.
Scalestick is NSF Certified under NSF/ANSI
Standard 42 for material requirements only
Choose a mounting location suitable to support
the full weight of the system when operating
Use 3/8” water line
Connect the system to the boiler water only! Do
not connect to the condenser!
Install vertically with cartridges hanging down
Allow 2-1/2” clearance below the cartridge for
easy cartridge replacement
Flush cartridges by running water through filter
for five minutes at full flow
Change 4CB5 cartridge on a regular 6 month
preventative maintenance program
Change SS-10 cartridge before Hydroblend™
compound is completely used up
Change cartridges when capacity is reached or
when pressure falls below 10 psi
Service flow rate must not exceed 1.67 gpm
Always flush the filter cartridge at time of
installation and cartridge change
For commercial steam applications
For use with countertop steamers
Overall Dimensions:
15.23”H x 13.72”W x 6.23”D
Inlet connection: 3/8”
Outlet connection: 3/8”
Service Flow Rate:
Maximum 1.67 gpm (6.3 Lpm)
Pressure Requirements:
10 psi -125 psi (0.7 – 8.6 bar), non-shock
Maximum water temperature at inlet:
80°F (27°C)
Alkalinity range:
2 to 12 grains per gallon
Kleensteam CT
No electrical connection required
Shipping Weight: 15 lbs.
Operating Weight: 18 lbs.
The contaminants or other substances
removed or reduced by this drinking water
system are not necessarily in your water. Do
not use with water that is microbiologically
unsafe or of unknown quality without
adequate disinfection before or after the
system. Systems certified for cyst reduction
may be used with disinfected water that may
contain filterable cysts.
Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.
Loading...