13
Pentair Water Product Warranty
Pentair Water warrants that, when this product is used for the purpose it was designed, is correctly housed and vented against
weather, vermin, dust etc., that it will be free of material and manufacturing defects at the time of the original purchase.
This warranty is limited to the cost of the product and does not cover third party costs including the costs of
electricians, plumbers, etc. unless authorised by Pentair Water.
TERMS AND CONDITIONS APPLICABLE INTERNATIONALLY
How long the warranty is effective Internationally
1) This Pentair Water product is warranted for 12 months for all parts from the date of the fi rst consumer purchase. Should
any parts fail as a result of such defects within the specifi ed period, the part will be replaced free of charge. (This does
not include travel charges, removal and reinstallation charges.)
TERMS AND CONDITIONS APPLICABLE IN AUSTRALIA AND
NEW ZEALAND
1) YOU SHOULD CAREFULLY READ THE INSTRUCTIONS SUPPLIED PRIOR TO USING THIS PENTAIR
WATER PRODUCT.
This product is to be installed and operated in accordance with the instructions
provided. This warranty will not apply if it is used in a manner other than in
accordance with the instructions.
What the warranty covers:
Pentair Water warrants its products to be free of defects in material and workmanship during the warranty period.
If a product proves to be defective in material or workmanship during the warranty period, then Pentair Water
will, at its sole option repair or replace the product with a like product. Replacement product or parts may include re-
manufactured or refurbished parts or components.
How long the warranty is effective:
1) This Pentair Water product is warranted for 24 months (Footpad and Seal fl aps - 12 months) from
the date of the fi rst consumer purchase.
2) Authorised workshop labour will be free of charge for the fi rst 12 month period from date of the fi rst
consumer purchase when unit is found to have failed due to defective workmanship or material
supplied by Pentair Water Australia.
Infi eld service by an authorised Pentair Water Service Agent will incur a travel, removal &
reinstallation fee payable by customer.
3) Where this Pentair Water product is sold for commercial application as defi ned in the relevant Trade
Practices and Consumer Protection legislation the warranty shall be for a period of six months from
the date of purchase by the end user.
Who the warranty protects:
This warranty is valid only for the consumer purchaser.
What the warranty does not cover:
1) Damage, deterioration or malfunction resulting from:
a) accident, misuse, negligence, fi re, water, lightning, or other acts of nature, unauthorised product
modifi cation or failure to follow instructions supplied with the product;
b) repair or attempted repair by anyone not authorised by Pentair Water;
c) any damage to the product due to shipment;
d) removal or installation of the product;
e) causes external to the product such as electric power fl uctuations or failure;
f) use of supplies or parts not meeting Pentair Water specifi cations;
g) normal wear and tear;
About your Pool and Filter System
Before installing your cleaner, review and understand all warnings and safety
information displayed at the beginning of each section.
Pre-installation check list
Before installing the cleaner in a vinyl liner pool:
Check liner closely for signs of deterioration or damage from age, chemicals, pool
wall damage, etc. If any damage is found, have a qualifi ed pool professional make all
necessary repairs. Also, if there are stones, roots, etc., under the liner, remove them
before installing the cleaner.
Before installing the cleaner in a concrete pool or a pool that is partially or completely
tiled:
Repair loose tiles and tighten any loose light rings.
Before installing the cleaner, clean your fi lter system:
Make sure you have cleaned the fi lter, including backwashing, rinsing, and emptying
all baskets. A clean system is necessary for proper cleaner operation and coverage.
Before installing the cleaner, fi ll the hose with water:
Always make sure the cleaner head is submerged and the hose is full of water
before connecting the hose to the fi ltration system (whether through a skimmer or
dedicated wall fi tting). Air in the system can damage the pump through dry running
and overheating.
Before installing the cleaner, understand cleaner coverage:
The cleaner is designed to rid your pool of debris in approximately 4-6 hours. Less
time could be needed, depending on the pool size.
The cleaner was not designed to automatically clean steps or swimouts or to work
under a solar cover. It was also not designed to do initial cleanup for a new pool or
when opening your pool for the season.
Suction entrapment, injury, and drowning hazard. If your pool has a dedicated
suction port (“vac port”) for vacuuming or for an automatic pool cleaner, it must
be covered when not in use.
A spring loaded safety cover (a “vac port fi tting”) is included with your cleaner. Install
it on the suction port to prevent entrapment and injury. If the cover provided does not
fi t, purchase one that does from your local pool store and install it instead.
2