Penn Union RAA, RAAC Catalog Page
SUBSTATION CONNECTORS
Aluminum Terminals
Types RAA and RAAC
For aluminum tube to flat
• Manufactured from high strength cast aluminum alloy
• Clamping hardware is of high strength, anodized and lubricated
2024-T4 aluminum alloy
• Side formed contact surfaces are standard to allow clearance for
flush mounting
• Oxide inhibitor recommended on contact surfaces
• Captive bolt head design permits single wrench installation
• Drilling in pads conforms to NEMA standards for 1/2” hardware
• Special drilling is available upon request
• If copper flashed pad is preferred on tongue, use “RAAC” prefix
• For tin plating, suffix catalog number with “-TN”
• For tongue mounting hardware, suffix catalog number with “-TMH”
SUBSTATION CONNECTORS
CATALOG
NUMBER
RAA-07-D
RAA-07-F
RAA-10-D
RAA-10-F
RAA-12-D
RAA-12-F 1.56 7.00 3.75 .50 3.56 5/8
RAA-12-E 1.56 8.00 3.75 .44 3.56 5/8
RAA-15-D
RAA-15-F 1.44 7.25 4.00 .50 3.88 1/2
RAA-15-E 1.44 8.25 4.00 .44 3.88 5/8
RAA-20-D
RAA-20-F 1.69 7.63 4.38 .56 4.44 5/8
RAA-20-E 1.69 8.63 4.38 .44 4.44 5/8
RAA-25-D
RAA-25-F 2.19 8.00 4.75 .63 5.13 3/4
RAA-25-E 2.19 9.00 4.75 .50 5.13 3/4
RAA-30-D
RAA-30-F 2.69 8.38 5.13 .75 5.75 3/4
RAA-30-E 2.69 9.38 5.13 .75 5.75 3/4
RAA-35-D
RAA-35-F 3.19 8.75 5.50 1.06 6.81 7/8
RAA-35-E 3.19 9.75 5.50 1.06 6.81 7/8
RAA-40-D
RAA-40-F 3.44 9.13 5.88 1.19 7.81 7/8
RAA-40-E 3.44 10.13 5.88 1.19 7.81 7/8
RAA-50-E 5 3.75 10.75 6.50 1.31 8.94 7/8
RAA-60-E 6 4.25 11.75 7.50 1.75 10.06 7/8
A
ALUMINUM
IPS
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
APPROXIMATE DIMENSIONS (IN.)
G L M T W
1.19 6.50 3.25 .44 2.63 1/2
1.19 6.50 3.25 .44 2.63 1/2
1.31 6.75 3.50 .44 3.00 1/2
1.31 6.75 3.50 .44 3.00 1/2
1.56 7.00 3.75 .50 3.56 5/8
1.44 7.25 4.00 .50 3.88 5/8
1.69 7.63 4.38 .56 4.44 5/8
2.19 8.00 4.75 .63 5.13 3/4
2.69 8.38 5.13 .75 5.75 3/4
3.19 8.75 5.50 1.06 6.81 7/8
3.44 9.13 5.88 1.19 7.81 7/8
BOLT
SIZE
286
Aluminum Terminals
Types RAA and RAAC
For aluminum and ACSR cable to flat
• Manufactured from high strength cast aluminum alloy
• Clamping hardware is of high strength, anodized and
lubricated 2024-T4 aluminum alloy
• Side formed contact surfaces are standard to allow
clearance for flush mounting
• Oxide inhibitor recommended on contact surfaces
• Reversible cap allows for expanded conductor range
• Captive bolt head design permits single wrench installation
• Drilling in pads conforms to NEMA standards for 1/2” hardware
• Special drilling is available upon request
• If copper flashed pad is preferred on tongue, use “RAAC” prefix
• For tin plating, suffix catalog number with “-TN”
• For tongue mounting hardware, suffix catalog number with “-TMH”
SUBSTATION CONNECTORS
CATALOG
NUMBER
RAA-013-S*
RAA-013-D* .75 5.25 2.00 .38 2.06 1/2
RAA-025-S
RAA-025-D .88 6.00 2.75 .38 2.13 1/2
RAA-025-F .88 6.00 2.75 .38 2.13 1/2
RAA-040-D
RAA-040-F .94 6.25 3.00 .38 2.25 1/2
RAA-065-D
RAA-065-F 1.00 6.75 3.50 .44 2.63 1/2
RAA-065-E 1.00 7.75 3.50 .38 2.63 1/2
RAA-090-D
RAA-090-F 1.06 7.00 3.75 .44 2.75 1/2
RAA-090-E 1.06 8.00 3.75 .38 2.75 1/2
RAA-125-D
RAA-125-F 1.19 7.50 4.25 .44 3.38 5/8
RAA-125-E 1.19 8.50 4.25 .44 3.38 5/8
RAA-160-D
RAA-160-F 1.25 7.75 4.50 .44 3.50 5/8
RAA-160-E 1.25 8.75 4.50 .44 3.50 5/8
RAA-200-D
RAA-200-F 1.44 8.25 5.00 .50 4.00 3/4
RAA-200-E 1.44 9.25 5.00 .50 4.00 3/4
RAA-300-D
RAA-300-F 2.13 8.50 5.25 1.00 4.50 3/4
RAA-300-E 2.13 9.50 5.25 .75 4.50 3/4
ALUMINUM ACSR
6 Str. - 2/0 Str. 6 - 2/0
6 Str. - 250 kcmil 6 - 4/0
3/0 Str. - 400 kcmil 3/0 - 336.4
250 - 650 kcmil 266.8 - 556.5
500 - 900 kcmil 477 - 795
600 - 1250 kcmil 556.5 - 1113
900 - 1600 kcmil 795 - 1431
1250 - 2000 kcmil 1113 - 1780
2000 - 3000 kcmil 1780 - 2870
A
CONDUCTOR RANGE
APPROXIMATE DIMENSIONS (IN.)
G L M T W
.75 3.88 2.00 .38 2.06 1/2
.88 4.63 2.75 .38 2.13 1/2
.94 6.25 3.00 .38 2.25 1/2
1.00 6.75 3.50 .44 2.63 1/2
1.06 7.00 3.75 .44 2.75 1/2
1.19 7.50 4.25 .44 3.38 5/8
1.25 7.75 4.50 .44 3.50 5/8
1.44 8.25 5.00 .50 4.00 3/4
2.13 8.50 5.25 1.38 4.50 3/4
BOLT
SIZE
*Denotes 2 bolt clamping
287
Loading...