Pelco TXB-NTCIP, TXB-S422, TXB-V Specsheet

PRODUCT SPECIFICATION

TXB Series Translator Board

PTZ CONTROL PROTOCOL CONVERTER

camera solutions

Product Features

• Compatible with Tactical Automated Security System (TASS)

Controllers

• Compatible with NTCIP™ Camera Control Protocol

• Compatible with American Dynamics™, Bosch® (Philips, Burle),

Hernis, Sensormatic

• Converts Third-Party Command Signals to Pelco D Protocol

• For Use in Spectra® Domes, Spectra Mini Domes, ExSite® Series

Systems, and Esprit

• Easy to Install

• Operation Transparent to User

• No Additional Hardware Required for Installation

The

TXB Series

communicate with Pelco’s Spectra

translator boards allow various controllers to

, and Vicon™ Controllers (as Speciﬁed)

Series Systems

domes, Spectra Mini domes, ExSite® Series, and Esprit® Series positioning systems. The optional, easy-to-install subassembly allows these systems, after setup, to receive commands from the controller and convert them to Pelco D protocol. Refer to the following page for the list of third-party controller compatibility.

TXB-V TRANSLATOR BOARD

(SHOWN INSTALLED WITH SPECTRA BACK BOX)

The

TXB-TASS

TASS controllers.

translator board is designed for the U.S. Air Force

TXB-TASS

translates the TASS protocol to

smoothly operate Pelco’s various integrated camera systems.

The

TXB-NTCIP

conformance to the present NTCIP

translator board has been designed and tested in

™

(National Transportation Communications for ITS [Intelligent Transportation Systems] Protocol) standard 1205 for Camera Control Devices.

All companies make changes and improvements to their products on a regular basis. Because this product is interfacing with equipment not manufactured by Pelco, the possibility exists that the interface protocols have changed or are in a different conﬁguration from earlier tested units; therefore, an incompatibility may occur. The existence of prior successful installations indicates our intent to provide equipment compatible with other manufacturers, but it does not guarantee successful results without on-site integration testing.

TXB-AD TRANSLATOR BOARD

(SHOWN INSTALLED IN ESPRIT ES31C SERIES

INTEGRATED POSITIONING SYSTEM)

(SIDE COVER HAS BEEN REMOVED)

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C1492 / REVISED 12-8-10

TECHNICAL SPECIFICATIONS

MODELS

TXB-AD Translator board for American Dynamics

controllers

TXB-B Translator board for Bosch (Philips, Burle)

controllers TXB-H Translator board for Hernis controllers TXB-S422 Translator board for Sensormatic controllers TXB-V Translator board for Vicon controllers TXB-NTCIP Translator board for NTCIP protocol TXB-TASS Translator board for TASS protocol

GENERAL

Construction Printed circuit board (PCB) Mounting Subassembly PCB plugs into interconnect PCB

of Spectra dome and Mini dome, ExSite and

Esprit Systems Dimensions

TXB-AD, TXB-B, TXB-H, 2.1" L x 1.6" W x 0.4" H TXB-S422, TXB-V (5.3 x 4.1 x 1.0 cm)

TXB-NTCIP 3.125" L x 2.25" W x 0.4" H

(7.9 x 5.7 x 1.0 cm) Weight

Unit 0.05 lb (0.02 kg) Shipping 1.0 lb (0.45 kg)

CERTIFICATIONS

• CE, Class B (when installed in Spectra dome and Spectra Mini dome,

ExSite and Esprit systems)

• FCC, Class B (when installed in Spectra dome and Spectra Mini dome,

ExSite and Esprit systems)

COMPATIBLE PELCO PRODUCTS

TXB-AD,

TXB-B,

TXB-S422,

TXB-V

Spectra II

Spectra III

™

•

•• • •

Spectra IV • • • •

Spectra Mini • • •

ExSite • • • •

Esprit • • • •

TXB-H TXB-NTCIP TXB-TASS

COMPATIBLE CONTROLLERS

American Dynamics

AD168 Matrix Switcher AD1600 Series AD1983 Control Code Converter AD2091 Series AD1650 Series* AD2050 Series* AD2150 Series* AD2350 Series*

Bosch (Philips, Burle)

LTC5136 AutoDome LTC5138 Virtual Keyboard [Rev. 1.01] (Allegiant® and AutoDome Systems) LTC8300 Series (Allegiant System) LTC8500 Fixed Speed Series (Allegiant System) LTC8800 Variable Speed Series (Allegiant System) LTC8850 Graphical User Interface (Allegiant System) LTC8600 Series (Allegiant System)* LTC8900 Series (Allegiant System)*

Hernis

Hernis 400 Controller

Sensormatic Electronics Corporation

RC58 (VM1-SensorVision®) RC216 (VM96-View Manager®) AD2083/02 Series American Dynamics protocol translator

NOTE:

SensorNet® not supported.

Vicon

V1300X-DVC Remote Control V1422™ Matrix Controller VPS324 Matrix Controller V4480SCC Matrix 44® Card Cage V6680SCC Matrix 66™ Card Cage V1300 Series NOVA™ Programmable Matrix Switching System* V1400X-DVC System Console Control Station* VPS1344™ Matrix Switching System*

NTCIP

NTCIP protocol control systems

TASS

Tactical Automated Security System protocol controllers

*Based on the information published by these manufacturers, Pelco has

reason to believe the TXB Translator Board will also work with these models

(refer to the disclaimer on the previous page).

Controller

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada International www.pelco.com

Tel (800) 289-9100 Fax (800) 289-9150

Tel +1 (559) 292-1981 Fax +1 (559) 348-1120

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its afﬁliates. All other product names and services are the property of their respective companies. Product speciﬁcations and availability are subject to change without notice.