Pelco SX8205R Specsheet

PRODUCT SPECIFICATION

SX8205R Unmanaged Ethernet Switch

video transmission

FIVE 10BASE-T/100BASE-TX PORTS

Product Features

• Five 10Base-T/100Base-TX Ports for the Transport of Bidirectional

Ethernet Data

• Uplink Port Capability for Easy Network Expansion

• User-Selectable Networking Functions on a Per-Port Basis:

– Autonegotiation Between 10 Mbps and 100 Mbps Data Rates and

Between Full-Duplex and Half-Duplex Modes

– 10 Mbps or 100 Mbps Selectable

– Full-Duplex or Half-Duplex Mode Selectable

– Enabling/Disabling of Flow Control

• Auto MDI/MDI-X (Medium Dependent Interface/Medium Dependent

Interface Crossover) Operation

• Compliant with IEEE 802.3, 802.3u, and 802.3x Standards

• Supports 10Base-T/100Base-TX Network Cable Distances up to

328 Feet

• Environmentally Hardened

• Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control

Equipment Environmental Standards

• No Performance Adjustments Required

• 12 VDC or 24 VAC Power Supply

• Stand-Alone and Rack-Mountable Modular Design

• LED Indicators for Monitoring of 10Base-T/100Base-TX Port Status

and Operating Power

The

SX8205R

100Base-TX ports for the transport of bidirectional Ethernet data.
Operating as a single switch in a network, the
a maximum of five 10Base-T/100Base-TX Ethernet devices. If a
larger switched network is needed, multiple
be connected by allowing a port on each switch to be used as an
uplink port. Cable connections from the
patible device or to another
maximum of 328 feet (100 meters).

Networking functions for each of the five 10Base-T/100Base-TX
ports (RJ-45 twisted-pair copper ports) are user-selectable by means
of a rotary switch. Autonegotiation allows a port to automatically

unmanaged Ethernet switch provides five 10Base-T/

SX8205R

SX8205R

SX8205R

SX8205R

switch are supported up to a

connects to

switches can

switch to a com-

negotiate between 10 Mbps and 100 Mbps data rates and between
full-duplex and half-duplex modes. If autonegotiation is not desired,
a port can be forced to specific modes of operation: 10 Mbps or
100 Mbps data rate, half-duplex or full-duplex mode, and the
enabling/disabling of flow control. The auto MDI/MDI-X feature
allows each RJ-45 port to connect to either a straight-through or
crossover RJ-45 cable.

Modular in design, the
used as a stand-alone module. Rack mounting is accomplished using
the RK5000 Series rack mount chassis. As a stand-alone module, the
unit can be placed on a desktop or can be mounted to a wall.

SX8205R

unit can be rack mounted or can be

TECHNICAL SPECIFICATIONS

MODEL

SX8205R Unmanaged Ethernet switch, five 10Base-T/

100Base-TX ports, rack-mountable

Note:

The conformal coated model is CX8205R.

Supplied Accessories

• Regulated switching power supply with multiple plug adapters
(North American, Australian, United Kingdom, and European);
100-240 VAC, 50-60 Hz input, 12 VDC output

Note:

In extreme temperature conditions, it is recommended that an

industrial-rated outdoor power supply be used.

• Wall clip for attachment of single module to wall

PERFORMANCE

Switch Type Unmanaged Layer 2
Switch Method Store and forward
Switch Fabric Non-head-of-line blocking
Data Rate 10/100 Mbps
Compliance IEEE 802.3, 802.3u, 802.3x
Interface Auto MDI/MDI-X
Operating Mode Half-duplex or full-duplex
Address Table Size 1,024 MAC address entries with automatic

Quality of Service IEEE 802.1p priority, tag-based, 4 queues per

Maximum Frame Size Untagged Ethernet frames up to 1,518 bytes

learning and aging

port, weighted fair queuing scheduling

Tagged Ethernet frames up to 1,522 bytes

GENERAL

Operating Temperature -40° to 167°F (-40° to 75°C)
Input Power Requirements 12 VDC or 24 VAC, 0.50 A
LED Indicators Power

10Base-T/100Base-TX Port Status
(2 LEDs per port: link/activity and speed,
duplex/collision and speed)

Dimensions 8.75" D x 1.08" W x 4.81" H

(22.23 x 2.74 x 12.22 cm)
Unit Weight 1.6 lb (0.73 kg)
Shipping Weight 3.0 lb (1.36 kg)

MECHANICAL

Connectors

Rack Power/Alarm 1, 4-pin connector
Stand-Alone Power 1, 2-pin connector, screw terminal
Electrical 5, RJ-45, 10Base-T/100Base-TX

CERTIFICATIONS

• CE, Class A

• UL Listed

• UL Listed to Canadian safety standards

• FCC, Class A

• C-Tick

• Complies with FDA requirements for Class 1 laser products

• Designed to meet NEMA TS 2 and Caltrans traffic signal control
equipment standards for ambient operating temperature, mechanical
shock and vibration, humidity with condensation, high-line/low-line
voltage conditions, and transient voltage protection (certification pending)

Note:

Conformal coating is required for operation in environments with

relative humidity above 95% (condensing).

OPTIONAL ACCESSORIES

WM5001-3U Wall mount base kit for single-width module
WM5001-3UEXP Wall mount expansion kit for single-width

RK5000-3U 19-inch rack mount chassis for 14 slots, no

RK5000PS-3U 19-inch rack mount chassis for 12 slots with

EPS5000-120 External rack power supply, 1 RU, dual 120 W

RK5001B-3U Blank filler panel, single width
RK5002B-3U Blank filler panel, double width
RK5001-1UEXP Adapter kit that allows a 3 RU single-width

module

power (3 RUs)

power (3 RUs)

power outputs

fiber module to be used in RK5100PS-5U rack
mount chassis

FIVE 10/100 Mbps

CONNECTIONS

SX8205R

SINGLE-SWITCH APPLICATION

SX8205R

10/100 Mbps

UPLINK

FOUR 10/100 Mbps

CONNECTIONS

SAMPLE OF MULTIPLE-SWITCH APPLICATION

SX8205R

FOUR 10/100 Mbps

CONNECTIONS