Pelco LL27WF, LL27NS, LL27MF Specsheet

PRODUCT SPECIFICATION

camera solutions

LL27 Series Infrared Illuminator

NARROW SPOT OR MEDIUM/WIDE FLOOD

Product Features

• 120 VAC or 230 VAC Input

• Automatic Photocell On/Off

• Accepts Readily Available Sealed-Beam Lamps

• Narrow Spot and Medium/Wide Flood Versions

• Air-Cooled for Longer Bulb Life

Pelco’s

LL27 Series

low light level cameras with sensitivity in the IR spectrum (above 700 nm) for nighttime surveillance when a minimum of visible illumination is required. An IR “covert” ﬁlter transmits approximately 0.01 percent of the visible light spectrum. Automatic on/off operations are controlled by a photocell with a time delay feature that prevents the unit from being switched off by a momentary beam of light such as that from a headlight. This rugged weatherproof unit is equipped with a built-in sun visor, quick-release latches for ease of service, and sturdy mounting cradle.

Three models are available; the

LL27WF

with wide ﬂood lamp, and the for maximum distance coverage. All models are equipped with a highly efﬁcient PAR56 sealed-beam lamp that provides an optimally uniform ﬁeld of illumination, making the illuminator effective with shorter focal length lenses.

To ensure longer bulb life, all models are equipped with a built-in blower.

infrared illuminator is designed to be used with

LL27MF

with medium ﬂood lamp, the

LL27NS

with narrow spot lamp

Ø6.00 (15.24) INFRARED FILTER

9.67

(24.56)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

21.00 (53.34)

3.75

(9.53)

7.00

(17.78)

3.50

(8.89)

ALL OTHERS ARE INCHES.

19.37 (49.20)

13.50 (34.29)

Ø8.62

(21.89)

Ø8.00

(20.32)

6.00

2.00

(15.24)

(5.08)

1/4-20 PEM NUT, 2X

C920 / REVISED 10-02

International Standards

Organization Registered Firm;

ISO 9001 Quality System

TECHNICAL SPECIFICATIONS

MODELS

LL27MF Infrared illuminator with 500 watt, medium

LL27NS Infrared illuminator with 500 watt, narrow

LL27NS-3 Same as LL27NS except 230 VAC input and

LL27WF Infrared illuminator with 500 watt, wide ﬂood

LL27WF-3 Same as LL27WF except 230 VAC input and

ﬂood lamp

spot lamp

300 watt, narrow spot lamp

lamp

300 watt, wide ﬂood lamp

ELECTRICAL

Input Voltage

LL27MF, LL27NS, LL27WF 120 VAC, 50/60 Hz LL27NS-3 and LL27WF-3 230 VAC, 50 Hz

Power Requirements 515 watts for 120 VAC models, 317 watts for

Power Cord Supplied with grounded power cord; US

Input voltage on/off controlled by photocell

230 VAC models

standard (120 VAC) or European standard (230 VAC) plug

GENERAL

IR Filter Coated pyrex, 0.190-inch (4.82 mm) thick,

Wavelength Transmission

Average Life (Lamp) 3,500 hours at rated voltage (lamps sensitive

Construction 6061 Aluminum Finish Gray polyester powder coat Environment -10° to 120°F (-23° to 49°C) Unit Weight

LL27LM 3.10 lb (1.41 kg) LL27M 3.10 lb (1.41 kg) LL27MF 11.77 lb (5.34 kg) LL27NS 11.87 lb (5.38 kg) LL27NS-3 11.82 lb (5.36 kg) LL27WF 11.82 lb (5.36 kg) LL27WF-3 11.71 lb (5.31 kg)

Shipping Weight

LL27LM, LL27M 4 lb (1.81 kg) All others 17 lb (7.70 kg)

transmits approximately 0.01% of visible light.

≤

1% at 715 nm and below

≤

5% at 775 nm ±25 nm

Avg ≥85% at 875-1200 nm

to change in voltage)

REPLACEMENT LAMPS

PAR56NS Narrow spot replacement lamp, 500W PAR56NS-3 Narrow spot replacement lamp, 300W PAR56MF Medium ﬂood replacement lamp, 500W PAR56WF Wide ﬂood replacement lamp, 500W PAR56WF-3 Wide ﬂood replacement lamp, 300W

Minimum Lens Focal Length for Optimum Scene Illumination

Camera Format

Lamp Type

Narrow Spot 16 mm 25 mm 32 mm 50 mm

Medium Flood 12 mm 18 mm 24 mm 37 mm

Wide Flood 8 mm 12 mm 16 mm 25 mm

Typical Maximum Range for Usable Picture with an Infrared Sensitive Camera

Lamp Type

Narrow Spot 12°H x 8°V 400 ft (121 m) 240 ft (73 m)

Medium Flood 26°H x 10°V 300 ft (91 m) 144 ft (43 m)

Wide Flood 40°H x 19°V 200 ft (60 m) 120 ft (36 m)

CAUTION:

illuminator can cause damage to the retina of the eye.

1/3" 1/2" 2/3" 1"

Approximate Angle

of View

Prolonged direct exposure to the radiant energy from the

LL27LM MOUNTING BRACKET FOR LEGACY® SERIES

Distance (at f1.8)

120V, 500W 230V, 300W

CERTIFICATIONS/RATINGS

• CE compliant (models LL27NS-3 and LL27WF-3 only)

• UL Listed (except 230 VAC models)

• Meets NEMA Type 3R standards

RECOMMENDED MOUNTS

LL27LM Bracket for mounting LL27 on Legacy® Series

LL27M Bracket for mounting LL27 on PT1200 Series

EM22/MM22 Wall and ceiling/pedestal mounts. PM2000/PM2010

with AH2000 Ceiling/pedestal mount with adapter. WM2000 with AH2000 Wall mount with adapter.

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada International www.pelco.com

pan/tilts.

Tel: (800) 289-9100 • FAX: (800) 289-9150

Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120

LL27M MOUNTING BRACKET FOR PT1200 SERIES PAN/TILT

Pelco, the Pelco logo, and Legacy are registered trademarks of Pelco, Inc.

Product speciﬁcations and availability subject to change without notice.