Pelco LD53PSB-1 Specsheet

PRODUCT SPECIFICATION

Stainless Steel Spectra® IV SE Series

BACK BOX AND LOWER DOME

camera solutions

Product Features

• All Stainless Steel Construction

• Built-in Back Box Memory

• Intregrated Passive UTP Circuit

• 7 Alarm Inputs; 2 Programmable Auxiliary Outputs

• Built-in Surge and Limited Lightning Protection

• Compatible with 29X and 36X Spectra

IV SE Dome Drives

• Bubble Constructed of Optically Clear Acrylic

• Environmental Pendant Model Only

• Indoor/Outdoor Applications

• Meets NEMA Type 4X and IP66 Standards

• Ability to Add IP Network Capability by Purchasing Optional TXB-N

Module

Pelco’s Stainless Steel Spectra® IV SE Series is designed for harsh environmental installations and meets NEMA Type 4X and IP66 standards.

The components (back box and lower dome) provide added protection against corrosive conditions. The pendant-style back box (BB4-PSG-E) is constructed of Type 316þStainless Steel (SS) and includes a sun shield (also constructed of Type 316 SS), heater, and fan. The lower dome features a trim ring constructed of Type 316 SS and an optically clear bubble that is available in smoked (LD53PSB-0) or clear (LD53PSB-1) acrylic.

The Stainless Steel Spectra IV SE Series has all the features of the Spectra IV SE dome system (built-in back box memory, two auxiliary outputs, seven alarm inputs) and is also compatible with all Spectra IV SE dome drives.

Camera and lens options for the Stainless Steel Spectra IV SE Series include:

–Day/night camera, 128X wide dynamic range, motion detection,

electronic image stabilization, image enhancement, LowLight technology, and 36X optical zoom with 12X digital zoom

–Day/night camera, 128X wide dynamic range, motion detection,

LowLight technology, and 29X optical zoom with 12X digital zoom

For an alternative mounting option use the IDM4012SS wall mount. The IDM4012SS mount is designed specifically for the Stainless Steel Spectra IV SE Series and features all stainless steel construction and conduit access in the bottom and back of the mount.

ENVIRONMENTAL PENDANT

BB4-PSG-E AND LD53PSB-1

(SHOWN WITH IDM4012SS WALL MOUNT)

DOME IS SECURED TO CEILING BY MOUNTING BRACKET

10.90

(27.69)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.

™

8.52

(21.64)

5.90

(14.99)

TOP PORTION OF BACK BOX IS REMOVABLE FOR SURFACE MOUNT APPLICATIONS

6.75

(17.15)

5.83

(14.80)

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C3415 / REVISED 12-21-12

TECHNICAL SPECIFICATIONS

SYSTEM MODEL NUMBERS

Back Box Type

Environmental Pendant

COMPONENT MODEL NUMBERS

Back Box Lower Dome Dome Drive*

BB4-PSG-E Environmental

*For PAL and CCIR models add “-X” suffix to part number (for example: SD429-PSGE0-X or DD429-X)

†

DD5-FM accepts camera and lens combinations including a BNC connector up to 12.70 x 6.99 x 6.99 cm (5.00" D x 2.75" W x 2.75" H).

Lower

Dome

Smoked SD429-PSGE0 SD436-PSGE0

Clear SD429-PSGE1 SD436-PSGE1

29X Day/Night* 36X Day/Night*

LD53PSB-0 Smoked, pendant, Pendant mount, gray 316 SS

LD53PSB-1 Clear, pendant, black

black trim ring 316 SS

trim ring 316 SS

DD429 Day/night (NTSC) camera (29X) DD436 Day/night (NTSC) camera (36X)

†

Removable, fixed mount bracket only (camera and lens not

DD5-FM

included); interchangeable with all Spectra IV dome drives

ELECTRICAL

Input Voltage 18 to 32 VAC; 24 VAC nominal Input Power

24 VAC 73 VA nominal

24 VDC 3 A nominal Fuse 1.6 A Auxiliary Outputs 2 Alarm Inputs 7

GENERAL

Construction

Back Box 316 stainless steel; gray, polyurethane

powder coated finish

Lower Dome

Trim Ring 316 stainless steel; black, polyurethane

powder coated finish

Bubble Acrylic, clear or smoked Cable Entry Through 1.5-inch NPT back box pendant

mount

Weight (approximate) Unit Shipping

Back Box 4.75 lb (2.15 kg) 7 lb (3.18 kg)

Lower Dome 1.83 lb (0.83 kg) 4 lb (1.81 kg)

Dome Drive 3.3 lb (1.48 kg) 4.9 lb (2.22 kg) Environment Indoor/outdoor Operating Temperature (Assumes no wind chill factor; for detailed

test conditions, contact Pelco)

Maximum 140°F (60°C) absolute maximum; 122°F

(50°C) sustained maximum

Minimum –60°F (–51.11°C) absolute minimum; minimal

icing at sustained minimum of –50°F (-45.56°C); prevents icing at sustained minimum of –40°F (–40°C); de-ices 0.1 inch (2.5 mm) within 3 hours after power-up

CERTIFICATIONS

• CE, Class B

• FCC, Class B

• UL/cUL Listed

•C-Tick

• S Mark for Argentina

• Meets NEMA Type 4X, IP66 standards when installed properly

OPTIONAL ACCESSORIES

IPS-CABLE Remote monitor cable and software. See

IPS-RDPE-2 Remote data port. 24 VAC, wall/pole mount

TXB Series

TXB-N Series

FS85011A

‡

If TXB/TXB-N Series or FS85011A boards are installed, it is not possible to

‡

Network-based communication module that

‡

upgrade system operating software through the remote data port (IPS-RDPE-2).

www.pelco.com for a list of compatible devices.

video/data breakout box. Allows ground-level control/programming and software upgrades when used with the IPS-CABLE.

Translator boards for AD Manchester, Hernis,

Bosch

(Philips, Burle), TASS, and NTCIP

protocols.

allows you to control and monitor Spectra IV dome systems over an IP network (in-ceiling and pendant models only). When TXB-N is installed in the camera's back box, the camera system supports Web and Endura connectivity to Pelco products and open architecture connectivity to third-party software. TXB-N provides simultaneous access to the camera from both an analog and IP-based control point.

Fiber transmitter sends one unidirectional composite video channel and one bidirectional data channel over one multimode or single-mode fiber optic cable.

RECOMMENDED POWER SUPPLIES

WCS Series Single/multiple 24 VAC camera power supply,

outdoor

RECOMMENDED MOUNT

IDM4012SS Stainless steel wall mount with feed-through

capabilities

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com www.pelco.com/community

Pelco, the Pelco logo, and other trademarks associ ated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and th e

ONVIF logo are trademarks of ONVIF Inc. All other prod uct names and

Product specifications and availability are subjec t to change without notice.

services are the property of their respective comp anies.