Pelco LB3000PS, LB3000 Specsheet

PRODUCT SPECIFICATION

21.0 (53.3)

17.22 (43.7)

19.0 (48.2)

26.25

(66.67)

RACK

UNITS

9.5

(24.2)

11.0 (27.9)

16.0 (40.6)

3.00 (7.6)

7.00

(17.7)

11.52 (29.2)

ACCESS PANEL OPENINGS (3X)

4.0 (10.0) X 10.0 (25.4)

Ø 1.5 (3.81)

29.0

(73.66)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.

SHOWN WITH VCR AND

MULTIPLEXER INSTALLED

LB3000 Series Lock Box

WALL MOUNT, TAMPER RESISTANT

control site

Product Features

• Holds VCR, Multiplexer, and Tapes

• Monitor Can Be Placed on Top of Lock Box

• Vented Top and Bottom Panels

• Wall Mount; Wiring Access Through Wall

• Tamper-Resistant Top and Side Panel Access for Connections

• LB3000PS Includes Integral Camera Power Supply

The

LB3000 Series

lock box provides a secure housing for a VCR, multiplexer, manuals, and up to 32 VCR tapes. Two keyed locks on the front door prevent unauthorized entry.

The

LB3000

and

LB3000PS

are designed for mounting to wall studs. Installation is easy: A mounting plate is attached to the wall over a standard outlet electrical box, and then the lock box is quickly fastened to the mounting plate. Cables for video and power cables are brought into the lock box through a hole in the wall. Panels with tamper-resistant screws in the top and sides of the lock box permit access for wiring.

An integral master power supply is provided with the provide 24 VAC power to cameras that are connected to the multiplexer. The power supply can handle as many as 16 cameras.

Ventilation holes in the top and bottom of the allow air to circulate through the unit so heat generated by the equipment can escape.

Inside the lock box, space is provided at the top for a rack-mounted multiplexer, such as Pelco’s Genex multiplexer there is a shelf to place a VCR, such as Pelco’s TLR3040, TLR3096, or TLR3168. Beneath the VCR is a small shelf for storage of documentation. Finally, two shelves in the bottom of the lock box permit storage of 16 video tapes each. A monitor, such as Pelco's PMC14H, can be set on top of the lock box to view surveillance activity.

C1907 / REVISED 10-03

Series multiplexer. Below the

LB3000PS

LB3000/LB3000PS

International Standards

Organization Registered Firm;

ISO 9001 Quality System

TECHNICAL SPECIFICATIONS

MODELS

LB3000 Wall mount lock box for VCR, multiplexer, and

VCR tapes

LB3000PS Same as LB3000 except includes integral

master power supply with 16 fused 24/28 VAC outputs

RELATED PRODUCTS

MX4000 Series Genex® multiplexer, 9- or 16-channels, color/

monochrome, simplex/duplex PMC14H 14-inch, high-resolution color monitor TLR3040 24-hour real-time/40-hour time-lapse VCR TLR3096 96-hour time-lapse VCR TLR3168 168-hour time-lapse VCR

ELECTRICAL

(Model LB3000PS Only)

Input Voltage 120 or 240 VAC, 50/60 Hz Output Voltage 24/28 VAC Outputs 16 Supply Current 10 A Maximum Current per Channel 3 A Required Input Current

120 VAC 2.20 A

240 VAC 1.15 A Surge Protection Yes Output Fuse Rating 3 A Output Connectors Screw-type barrier strips Output Wire Size 12-22 gauge, solid or stranded wire Recommended Wiring Distances See chart below

GENERAL

Maximum Load 65 lb (29.4 kg) Mounting Eight 3/8-inch mounting holes Cable Entry Opening in back of lock box: 9.5" H x 11.0" W

Environment Indoor Dimensions 29.0" H x 21.0" W x 19.0" D

Construction

Lock Box Aluminum Mounting Plate Steel

Mounting Plate Support Steel Finish Charcoal gray polyester powder coat Weight Unit

LB3000 48 lb (21.7 kg) 59 lb (26.7 kg)

LB3000PS 65 lb (29.4 kg) 76 lb (34.4 kg)

(24.1 x 27.9 cm)

(73.6 x 53.3 x 48.2 cm)

Shipping

CERTIFICATIONS

• CE compliant

• UL Listed

• UL Listed to Canadian safety standards

The following are the recommended maximum distances (transformer to load) and are calculated with a 10-percent voltage drop. (Ten percent is generally the maximum allowable voltage drop for AC-powered devices.) Distances are calculated in feet; values in parentheses are meters.

Recommended Wiring Distance Chart

Wire Guage

Input

Total VA

Voltage

Consumed

24 VAC 10

28 VAC 10

20 30 50

20 AWG

(0.5 mm2)

283 141

94 56

386 193 128

(86) (42) (28) (17)

(117)

(58) (39) (23)

18 AWG

(1.0 mm2)

451 225 150

614 307 204 122

(137)

(68) (45) (27)

(187)

(93) (62) (37)

16 AWG

(1.5 mm2)

716 358 238 143

975 487 325 195

(218) (109)

(72) (43)

(297) (148)

(99) (59)

Pelco Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada International www.pelco.com

Tel: (800) 289-9100 • FAX (800) 289-9150 Tel: (559) 292-1981 • FAX (559) 348-1120

Genex, Pelco, and the Pelco logo are registered trademarks of Pelco.

Speciﬁcations subject to change without notice.