PRODUCT SPECIFICATION
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
A
19.31 (49.05)
15.00 (38.10)
21.00 (53.34)
B
LB1000, LB1000DC
LB1012
3.50 (8.89)
8.10 (20.57)
18.00 (45.72)
7.75 (19.68)
18.25 (46.36)
7.50 (19.05)
12.00 (30.48)
INSIDE USABLE DIMENSIONS*:
18.00 (45.72)
11.50 (29.21) - ONE UNIT
5.50 (13.97) - TWO UNITS
18.25 (46.36)
A
B
W
H
D
* MOUNTING BRACKETS IN LB1012 WILL ACCOMMODATE
ONE ADDITIONAL DEVICE WITH THE FOLLOWING DIMENSIONS:
W = 15.00 (38.1) MINIMUM
18.00 (45.72) MAXIMUM
H = 5.50 (13.97)
D = 17.50 (44.45)
LB1000/LB1012 DIMENSION DRAWING
LB2000
LB1000
LB1000 Series and LB2000 Lock Boxes
VERTICAL/HORIZONTAL, TAMPER RESISTANT
control site
Product Features
• Vented Side Panels
• Conduit Knockouts
• Pre-Wired, Filtered Fan Assembly
• Pre-Wired AC Cord (except LB1000DC)
• LB1000, LB1012, and LB2000 Have Two AC Duplex Outlets (One
Internal, One External) Internally Fused for Accessories
• LB1000DC Has Three Terminal Blocks (Two Internal, One External)
Internally Fused for Accessories
• Lock Boxes Can Be Stacked or Daisy-Chained Together
• Two 1-Inch (2.54 cm) Grommeted Cable Ducts
The LB1000 Series horizontal lock box is designed to provide high
security protection for top- or front-loading VCRs. These lock boxes
maintain security integrity for all tape recordings by means of a
metallic front panel with tamper-resistant lock. The smoked acrylic
window in the front panel allows complete viewing and monitoring of
the unit during recording and operation.
The LB1000 and LB1000DC are designed for use with a single VCR.
The LB1012 includes mounting brackets to accommodate an additional VCR, quad, or switcher. The brackets may be removed to
accommodate a single, larger recorder.
Front-loading VCRs can be easily accessed by unlocking the forwardopening front panel. The gas-strut, hinged lid provides convenient
access to all top-loading VCRs.
The LB2000 is a vertical lock box designed to provide security protection for “tower type” computer disk drives or other vertically
standing devices. The LB2000 also has a smoked acrylic viewing
window and forward-opening front panel with tamper-resistant lock
for convenient access.
Added features such as vented side panels and a continuous-duty fan
assembly help maintain an ambient operating temperature in all AC
models; the LB1000DC is equipped with a 12 VDC thermostatically
controlled heater and fan.
C911 / REVISED 3-04
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
10.31
(26.18)
6.00
(15.24)
20.50
(52.07)
24.25
(61.59)
26.10
(66.29)
W 9.50 (24.13)
H 20.50 (52.07)
D 20.50 (52.07)
INSIDE USABLE DIMENSIONS:
MODELS
LB1000 Horizontal lock box with 120 VAC, 60 Hz
continuous-duty fan for top- or front-loading
VCRs.
LB1000DC Same as LB1000 except has three 3-position
DC terminal blocks and 12 VDC
thermostatically controlled heater and fan.
LB1012 Larger capacity horizontal lock box for one or
two VCRs. Mounting brackets can
accommodate an additional VCR or quad with
a minimum width of 15 inches (38.1 cm) and
maximum height of 5.5 inches (13.9 cm).
LB2000 Vertical lock box for “tower type” computer
disk drives and vertically standing devices.
ELECTRICAL
Power Connection
LB1000DC Three, 3-position terminal blocks (two
internal, one external) internally fused
All AC Models Input power cord plus two AC duplex power
outlets (one internal, one external) internally
fused
Cooling
LB1000DC Internal 12 VDC fan, thermostatically
controlled, turns on at 100°F (37°C) and off at
70°F (21°C)
All AC Models Internal 4-inch (10.16 cm) square fan,
continuous duty, 120 VAC
Heating
LB1000DC only 12 VDC, 20 watts, thermostatically controlled,
turns on at 40°F (4°C) and off at 60°F (15°C)
Fusing
LB1000DC 5A, Type 3AG
LB1000, LB1012,
LB2000 3A, Type 3AG
Front Viewing Window 0.25-inch (6.35 mm) thick smoked acrylic
Window Viewing Area
LB1000, LB1000DC 15.00" W x 3.50" H
(38.1 x 8.89 cm)
LB1012 15.00" W x 7.50" H
(38.1 x 19.05 cm)
LB2000 6.00" W x 20.50" H
(15.24 x 52.07 cm)
Top Lid Assist Gas strut (except LB2000)
Construction 16-gauge cold-rolled steel
Finish Black polyester powder coat
Unit Weight
LB1000 29.9 lb (13.60 kg)
LB1000DC 29.06 lb (13.18 kg)
LB1000MT 7.89 lb (3.58 kg)
LB1012 36.2 lb (16.29 kg)
LB2000 42.3 lb (19.22 kg)
Shipping Weight
LB1000 38 lb (17.21 kg)
LB1000DC 37 lb (16.76 kg)
LB1000MT 12 lb (5.43 kg)
LB1012 45 lb (20.38 kg)
LB2000 55 lb (24.91 kg)
OPTIONAL ACCESSORIES
LB1000MT Wall mount kit for LB1000 Series
GENERAL
Cable Entry
LB1000 Series Four conduit knockouts punched for 0.50-inch
LB2000 Two 0.50-inch (1.27 cm) conduit knockouts
(1.27 cm) or 0.75-inch (1.90 cm) holes
Two 1-inch (2.54 cm) grommeted cable ducts
Two 1-inch (2.54 cm) grommeted cable ducts
Pelco Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150
International Tel: (559) 292-1981 • FAX (559) 348-1120
www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco.
Specifications subject to change without notice.
©Copyright 2004, Pelco. All rights reserved.