Pelco KSC-3000U specification sheets

PRODUCT SPECIFICATION

KSC-3000U Controller

FIXED/VARIABLE SPEED, PTZ CONTROL, DIRECT MODE ONLY

Product Features

• All-In-One mouse, keyboard, joystick

• Two RS-485 ports

• Shortcut keys

• Provides a variety of add-ons

• More than 16 built-in protocols

• Built-in Jog shuttle, joystick for user convenience

camera solutions

The KSC-3000U Series is a USB keyboard controller for use with
Pelco’s analog cameras (Pelco D and P Protocol) including the Spectra
Mini (SD5 Series), Spectra IV, and Esprit SE.

The KSC-3000U Series is capable of half and full duplex mode with
two RS-485 ports.

The KSC-3000U Series can be used as a mouse, keyboard, or
joystick for a PC or network video recorder without external driver
installation. Alphanumeric characters’ input is supported through the
numeric keypad in Keyboard Mode. Mouse scroll and sensitivity
setting is supported in Mouse Mode.

All hotkeys for the PC applications can be supported with the
controller’s shortcut keys in Hotkey Mode. Create and modify
shortcut keys using the system controller.

All buttons on the KSC-3000U Series can be used as the joystick
buttons and are programmable except for ESC (when exiting from
HID mode) and USB HID (when changing from three different HID
modes).

The KSC-3000U Series features a built-in 3-Axis proportional
joystick, LCD, rubber buttons, and Jog Shuttle for ease of operation.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C4069 / Revised 5-06-19

TECHNICAL SPECIFICATIONS

Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All othe r product names and

services are the property of their respective comp anies.

Product specifications and availability are subject to change without no tice.

©Copyright 2019, Pelco, Inc. All rights reserved.

18.33
(7.22)

4.83

(1.90)

9.35

(3.68)

31.84

(12.54)

MODEL

KSC-3000U Fixed/variable speed, PTZ control, Direct

Mode only

MECHANICAL

Communication Port Port 1, Terminal Block, Half Duplex/Full

Duplex
Port 2, Terminal Block, Half Duplex/Full

Duplex
USB Port B Type Support, USB 1.1 ~ USB 3.0
USB Device HID Mouse / HID Keyboard / HID Joystick /

Support Hot - Key
LCD View 2 x 16 Character Yellow Backlight LCD
LED Indicator Power / TX /RX
Numeric Key 0 ~ 9 / Clear / Enter
Keyboard Address 0 ~ 9 (Standalone, Master, Sub)
PTZ Number 0 ~ 255

OPERATION

Protocol Pelco D, Pelco P, Samsung 5, Samsung T,

Vicon, Panasonic, Bosch, GE, Honeywell,

Elmo, AD, ERNA, VCL TP, Youjin, W-DRX,

Sungjin
Function Key ESC, Set, PTZ, Cam, Preset, Scan, Pattern,

Tour, Auto, HID, Aux On, Aux Off
Joystick Up, Down, Left, Right, Tele, Wide

ELECTRICAL

Power DC 12 V ±10% (200mA) /DC Jack/USB 5V

(500mA)

Power Consumption < 3 W

GENERAL

Finish Black
I/O Connector Terminal block 8P / Firmware Upgrade

Connector
Operating Temperature 0°C ~ 40°C
Operating Humidity 0 ~ 90%
Dimensions 31.84 (W) x 18.33 (H) x 9.35 (D) cm
Baud Rate 2400, 4800, 9600, 19200, 38400, 57600 BPS

ACCESSORIES

Optional 12 VDC Power adapter: KSC-PSKIT (sold separately)

NOTE: KSC-3000U is not intended for use with any Analog Matrix System.

CERTIFICATIONS

CE, Class A
FCC, Class A

NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
DRAWINGS AND DIMENSIONS NOT TO SCALE.

Pelco

625 W. Alluvial, Fresno, California 93711 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community