Pelco KBD300A Specsheet

PRODUCT SPECIFICATION

video recording solutions

KBD300A Keyboard

FULL-FUNCTIONALITY, FIXED/VARIABLE SPEED, PTZ CONTROL

Product Features

• Keyboard to Control:

– CM6700/CM6800/CM9760-SAT/CM9700 Matrix Switchers

– DX8100 Series Digital Video Recorder

®

– Genex

– Up to 16 Receivers Directly from Keyboard (such as Spectra

Multiplexer When Used with CM6700 and CM6800

®

, and ExSite®)

Esprit

®

,

• Automatic Recognition of CM6700/CM6800 and Direct P Modes

• Joystick Control of PTZ Functions

• Preset Position and Pattern Control

The

KBD300A

keyboard is a full-function, desktop keyboard

controller that can be used in a variety of applications.

A barrel-type joystick provides precise pan and tilt control of fixed
speed and variable speed receivers. Twisting the joystick clockwise
or counterclockwise zooms the lens in or out.

Keys select cameras and monitors; operate presets, patterns,
auxiliaries, and sequences; open and close the iris; zoom and focus
the lens; and start and stop auto, frame, and random scanning.

The keyboard can be used in six modes of operation:
CM6700/CM6800/CM9760-SAT Mode, Direct P, Direct D, CM6700
ASCII, CM6800 ASCII/DX8100, and CM9760-MDA. The

KBD300A

keyboard automatically recognizes CM6700/CM6800 and Direct P
modes. The

KBD300A

must be operated in CM6700 ASCII mode

when used with the DX4500/DX4600 Series DVRs and the Digital

®

Sentry

DS ControlPoint server or remote client. The

KBD300A

keyboard must run firmware 5.0 or later to operate in CM6700 ASCII
mode.

In the first two modes, the keyboard is plugged into a CM6700,
CM6800, or CM9760-SAT switcher/controller unit (SCU) and is used to
program and operate the SCU. The maximum number of keyboards per
unit is eight (CM6700 and CM6800-32X6), sixteen (CM6800-48X8,
CM6800E-48X8, and CM6800-96X16) or four (CM9760-SAT). In
CM6700/CM6800 applications, the keyboard can control cameras
connected directly to the SCU or through an MX4000 Series Genex
multiplexer.

If you do not need all the features of the CM6700/CM6800 SCU but
want the same keyboard functionality, then one keyboard can be
wired directly to camera receivers in Direct P or Direct D mode
(KBD-KIT is required).

• Auxiliary Operation

• Auto/Random/Frame Scanning

• Programming of CM6700/CM6800/CM9760-SAT/CM9760-MDA

Up to 16 receivers can be wired to a keyboard; however, a switcher
such as an MS500 or VA6100 is required to route video to the
monitor. Direct P or Direct D mode uses 2-wire control of receivers
using Pelco P or Pelco D protocols.

The

KBD300A

keyboard can also be used for on-screen programming

of the CM9760-MDA master distribution amplifier.

When used with the CM9760-DMR data manager, up to four

KBD300A

keyboards can be used to control a single Pelco P or Pelco D protocol
device such as a Spectra

®

dome or an Esprit®/ExSite® positioning

system.

The optional KBD300USBKIT is required to connect the KBD300A
keyboard to the DX4500/DX4600. The KBD300USBKIT is also required
to control certain functions of DS ControlPoint software.

MONITOR

SPECTRA

SPECTRA

CM6700

LOOPED
CAMERA
INPUTS

CM6700 MODE

REMOTE
PORT

LOCAL
PORT

KBD300A

KBD300A

KBD300A

MONITOR

MX4000 MULTIPLEXER
(OPTIONAL)

®

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C527 / REVISED 7-31-09

TECHNICAL SPECIFICATIONS

MODEL

KBD300A Desktop keyboard with full switching and

programming capabilities, plus joystick
control of PTZ functions

ELECTRICAL

Input Voltage 12 VAC or ±12 VDC
Power Consumption 5 W
Keyboard Connector RJ-45, 8-pin, modular (female)
Keyboard Communication

CM6700/CM6800/CM9760-SAT Mode

Interface RS-485
Protocol Pelco ASCII
Baud 9600
Communication
Parameters 8 data bits, odd parity, 1 stop bit

CM6700 ASCII Mode

Interface RS-422
Protocol Pelco ASCII
Baud 9600
Communication
Parameters 8 data bits, odd parity, 1 stop bit

CM6800 ASCII Mode/DX8100

Interface RS-485
Protocol Pelco ASCII
Baud 9600
Communication
Parameters 8 data bits, odd parity, 1 stop bit

Direct P Mode

Interface RS-485
Protocol Pelco P
Baud 4800
Communication
Parameters 8 data bits, no parity, 1 stop bit

Direct D Mode

Interface RS-485
Protocol Pelco D
Baud 2400
Communication
Parameters 8 data bits, no parity, 1 stop bit

CERTIFICATIONS/PATENTS

• CE, Class B

• FCC, Class B

• UL/cUL Listed

• C-Tick

• U.S. Patent D-464,654

SUPPLIED ACCESSORIES

25-foot (7.6 m) RJ-45 data cable

OPTIONAL ACCESSORIES

KBDKIT Remote keyboard wiring kit. Required if

connecting KBD300A keyboards to the
Remote Keyboard Port on the SCU
(CM6700/CM6800 Mode) or when using a
single keyboard in Direct Mode applications.
Includes two RJ-45 wall blocks and one 120
VAC to 12 VAC transformer. Maximum cable
distance for RS-422/RS-485 communication
over 24-gauge wire is 4,000 feet (1,219 m).
Use shielded twisted pairs cable that meets
basic requirements for RS-422/RS-485
applications. (One wall block and transformer
required for each keyboard.)

KBDKIT-X Same as KBDKIT except includes 230 VAC to

12 VAC transformer.

KBD300USBKIT Wiring kit to attach a KBD300A to a USB port

on either the DX4500/DX4600 or
DS ControlPoint on the DS DVR or remote
client. Includes: KBDKIT/KBDKIT-X wiring kit
(keyboard power supply and RJ-45 junction
box), PV140 RS-232 to RS-422 (DB9
connector) converter and power supply
(included but not used), and USB to RS-232C
adapter cable.

KBD300A

GENERAL

Keyboard Keypad Electromechanical
Joystick 3-axis, vector-solving with twisting,

return-to-center head
Display Red LED, 7-segment, 2 cells
Dimensions 2.25" H x 9.50" W x 7.125" D

(5.72 x 24.13 x 18.10 cm)
Weights

Unit 2.5 lb (1.12 kg)
Shipping 5 lb (2.26 kg)

ENVIRONMENTAL

Ambient Operating
Temperature 20° to 120°F (-7° to 49°C)

Humidity 10% to 90%, noncondensing

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada
International
www.pelco.com

Tel: [phone] • FAX: [phone]

Tel: [phone] • FAX: [phone]

SPECTRA*

ESPRIT*

VA6100 SWITCHER

MONITOR

* SPECTRA AND ESPRIT HAVE BUILT-IN RECEIVERS.
LEGACY REQUIRES LRD41C SERIES RECEIVER.

DIRECT MODE

Pelco, the Pelco logo, Digital Sentry, Spectra, Genex, Esprit, ExSite, and Legacy are registered trademarks of Pelco, Inc.

Product specifications and availability subject to change without notice.

©Copyright 2009, Pelco, Inc. All rights reserved.

LEGACY*