Pelco KBD200A Specsheet

PRODUCT SPECIFICATION
matrix systems and controls
KBD200A Keyboard
FULL-FUNCTIONALITY, FIXED/VARIABLE SPEED, PTZ CONTROL
Product Features
Keyboard to Control:
– CM6700/CM6800/CM9760-SAT/CM9700 Matrix Switchers
®
– Genex
– Up to 16 Receivers Directly from Keyboard (such as Spectra
Multiplexer When Used with CM6700 and CM6800
®
)
Esprit
®
and
Multi-Speed Control of PTZ Functions
Preset Position and Pattern Control
Auxiliary Operation
Auto/Random/Frame Scanning
Programming of CM6700/CM6800/CM9760-SAT/CM9760-MDA
Automatic Recognition of CM6700/CM6800 and Direct P Modes
Keyboard Control of all CM6800 External Auxiliaries
The
KBD200A
Keyboard is a full-function, desktop keyboard
controller that can be used in a variety of applications.
Left, right, up, and down keys provide precise pan and tilt control of fixed speed and variable speed receivers. Variable speed equipment is controlled by programming the speed with the keyboard.
Additional keys select cameras and monitors; operate presets, patterns, auxiliaries, and sequences; open and close the iris; zoom and focus the lens; and start and stop auto, frame, and random scanning.
ASCII Mode. If additional keyboards are required, they can be connected directly to the SCU and used in CM6700/CM6800 Mode.
If you do not need all the features of the CM6700/CM6800 SCU but want the same keyboard functionality, then one
KBD200A
keyboard can be wired directly to camera receivers in Direct P or Direct D Mode (KBDKIT required). Up to 16 receivers can be wired to a keyboard; however, a switcher such as an MS500 or VA6100, is required to route video to the monitor. Direct P or Direct D Mode uses two-wire control of receivers using Pelco’s P or D protocol.
The
KBD200A
keyboard can also be used for on-screen programming
of the CM9760-MDA master distribution amplifier.
The keyboard can be used in six modes of operation: CM6700/ CM6800/CM9760-SAT Mode, Direct P, Direct D, CM6700 ASCII, CM6800 ASCII/DX8100, and CM9760-MDA.
In the first two modes, the keyboard is plugged into a CM6700, CM6800, or CM9760-SAT switcher/controller unit (SCU) and is used to program and operate the SCU. The maximum number of keyboards per unit is eight (CM6700 and CM6800-32X6), sixteen (CM6800-48X8, CM6800E-48X8, and CM6800-96X16), or four (CM9760-SAT). In CM6700/CM6800 applications, the keyboard can control cameras connected directly to the SCU or through an MX4000 Series Genex multiplexer.
ASCII Mode is the same as the CM6700 and CM6800 Modes except that the keyboard communicates with the SCU over dial-up or fiber-optic communication lines. An RS-232 or RS-422 interface is required for the CM6700. ASCII Mode for the CM6800 requires RS-232 or RS-485. Only one keyboard can be used with an SCU in
C526 / REVISED 7-16-08
MONITOR
MX4000 MULTIPLEXER (OPTIONAL)
MONITOR
SPECTRA
SPECTRA
CM6700
LOOPED CAMERA INPUTS
CM6700 MODE
Organization Registered Firm;
LOCAL PORT
REMOTE PORT
International Standards
ISO 9001 Quality System
KBD200A
KBD200A
KBD200A
TECHNICAL SPECIFICATIONS
MODEL
KBD200A Desktop keyboard with full switching and
programming capabilities, plus multi-speed control of PTZ functions
GENERAL
Keyboard Keypad Electromechanical Display Red LED, 7-segment, 2 cells Multiplexer Mode
Indicator Green LED
ELECTRICAL
Input Voltage 12 VAC or ±12 VDC Power Consumption 5 watts Keyboard Connector RJ-45, 8-pin, modular (female) Keyboard Communication
CM6700/CM6800/CM9760-SAT Mode
Interface RS-485 Protocol Pelco ASCII Baud 9600 Communication Parameters 8 data bits, odd parity, 1 stop bit
CM6700 ASCII Mode
Interface RS-422 Protocol Pelco ASCII Baud 9600 Communication Parameters 8 data bits, odd parity, 1 stop bit
CM6800 ASCII Mode
Interface RS-485 Protocol Pelco ASCII Baud 9600 Communication Parameters 8 data bits, odd parity, 1 stop bit
Direct P Mode
Interface RS-485 Protocol Pelco P Baud 4800 Communication Parameters 8 data bits, no parity, 1 stop bit
Direct D Mode
Interface RS-485 Protocol Pelco D Baud 2400 Communication Parameters 8 data bits, no parity, 1 stop bit
ENVIRONMENTAL
Dimensions 2.25" H x 8.125" W x 7.125" D
(5.72 x 20.64 x 18.10 cm) Unit Weight 2.1 lb (0.95 kg) Shipping Weight 4 lb (1.81 kg) Ambient Operating
Temperature 20° to 120°F (-7° to 49°C) Humidity 10% to 90%, non-condensing
CERTIFICATIONS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
• C-Tick
• GOST
SUPPLIED ACCESSORIES
25-foot (7.6 m) RJ-45 data cable
OPTIONAL ACCESSORIES
KBDKIT Remote keyboard wiring kit. Required if
connecting KBD200A keyboards to the
Remote Keyboard Port on the SCU (6700/6800
Mode) or when using a single keyboard in the
Direct or ASCII Mode applications. Includes
two RJ-45 wall blocks and one 120 VAC to
12 VAC transformer. Maximum cable distance
for RS-422/RS-485 communication over
24-gauge wire is 4,000 feet (1,219 m). Use
shielded twisted pairs cable that meets basic
requirements for RS-422/RS-485
applications. (One wall block and transformer
required for each keyboard.) KBDKIT-X Same as KBDKIT except includes 230 VAC to
12 VAC transformer.
KBD200A
CM6700 OR CM6800
RS-232/RS-422 INTERFACE
DIAL-UP OR FIBER-OPTIC COMMUNICATION
SPECTRA
MONITOR
ASCII MODE
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada International www.pelco.com
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
LINE
KBD200A
SPECTRA*
ESPRIT*
VA6100 SWITCHER
MONITOR
* SPECTRA AND ESPRIT HAVE BUILT-IN RECEIVERS. LEGACY REQUIRES LRD41C SERIES RECEIVER.
DIRECT MODE
Pelco, the Pelco logo, Genex, Legacy, Spectra, Esprit, and Coaxitron are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2008, Pelco, Inc. All rights reserved.
LEGACY*
Loading...