Pelco KBD100 Specsheet
PRODUCT SPECIFICATION
KBD100 Keyboard
SWITCHER CONTROL AND PROGRAMMING
Product Features
• Control and Program CM6700 and CM6800 Matrix Switchers
• Select Cameras and Monitors
• Operate Sequences
• Operate Auxiliaries
• Acknowledge Alarms
The KBD100 keyboard is Pelco’s most economical keyboard. It is
used to program and operate CM6700 and CM6800 matrix switchers.
The rear of the keyboard has four DIP switches and an RJ-45 connector. The DIP switches are used to set the keyboard’s address. Each
keyboard in the system must have a different address. The RJ-45 connector is used to connect to either the CM6700 or the CM6800.
MONITOR
MX4000 MULTIPLEXER
(OPTIONAL)
matrix systems and controls
CAMERA
CM6700/CM6800
LOOPED
CAMERA
INPUTS
REMOTE
PORT
LOCAL
PORT
KBD100
KBD100
You can connect a single keyboard to the local keyboard port on the
CM6700, or you can connect up to eight if using the remote keyboard
port.
You can connect up to 16
KBD100
keyboards to the CM6800.
MONITOR
CAMERA
KBD100
CM6700/CM6800 MODE
C529 / REVISED 10-03
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODEL
KBD100 Desktop keyboard, switcher only
ELECTRICAL
Input Voltage 12 VAC or ±12 VDC
Power Consumption 5 W
Connector Type RJ-45, 8-pin modular (female)
Keyboard Communication
Interface RS-422
Protocol Pelco ASCII
Baud 9600
Communication
Parameters 8 data bits, odd parity, 1 stop bit
GENERAL
Keyboard Keypad Electromechanical
Display Red LED, 7-segment, 2 cells
Dimensions 2.25" H x 6.00" W x 7.125" D
Unit Weight 2.11 lb (0.96 kg)
Shipping Weight 4 lb (1.82 kg)
(5.72 x 15.24 x 18.10 cm)
ENVIRONMENTAL
Operating Temperature 20° to 120°F (-7° to 49°C)
Humidity 10% to 90%, non-condensing
CERTIFICATIONS
• CE, Class A
• UL Listed
• UL Listed to Canadian safety standards
• FCC, Class A
SUPPLIED ACCESSORIES
25-foot (7.6 m) RJ-45 data cable
OPTIONAL ACCESSORIES
KBDKIT Remote keyboard wiring kit. Required if
KBDKIT-X Same as KBDKIT except includes 230 VAC to
connecting KBD100 keyboards to the Remote
Keyboard Port on the CM6700/CM6800.
Includes two RJ-45 wall blocks and one
120 VAC to 12 VAC transformer. Maximum
cable distance for RS-422 communication
over 24-gauge wire is 4,000 feet (1,219 m).
Use shielded twisted pairs cable that meets
basic requirements for RS-422 applications.
(One wall block and transformer required for
each keyboard.)
12 VAC transformer.
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX: (800) 289-9150
International Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2003, Pelco, Inc. All rights reserved.
Loading...