Pelco FTV10S1ST, FTV10M1ST Specsheet
PRODUCT SPECIFICATION
FTV10 Transmitter
SINGLE-CHANNEL DIGITALLY ENCODED VIDEO
Product Features
• 10-Bit Digitally Encoded Video for High-Quality Video Transmission
over a Single Fiber
• Multimode Fiber Support for Distances up to 4 km (2.5 mi)
• Single-Mode Fiber Support for Distances up to 54 km (33.6 mi)
• Exceeds All Requirements for EIA RS-250C Short-Haul
Transmission Specifications
• Laser Diode for Transmission of Optical Signals
• Compatible with NTSC, PAL, or SECAM Video Standards
• Designed to meet NEMA TS 1/TS 2 and Caltrans Traffic Signal
Control Equipment Environmental Standards
• Voltage Transient Protection on All Power and Signal
Input/Output Lines
• LED Status Indicators for Monitoring All Critical
Operating Parameters
• Stand-Alone or Rack-Mountable Modular Design
transmission & power
FTV10S1ST
The FTV10 fiber transmitter transmits one channel of video over one
optical fiber. The FTV10 transmitter is compatible with the FRV20
receiver and is available in both multimode and single-mode
versions.
The FTV10 plug-and-play design ensures ease of installation by
requiring no electrical or optical adjustments. Modular in design,
FTV10 units can be rack-mounted using the EURACK/USRACK
chassis, or stand-alone modules can be placed on a desktop or
mounted to a wall (wall mount kit not required).
For stand-alone and wall mount installations, external power is
required for the FTV10 units. The units can be powered with the
recommended FEXTPS fiber external power supply.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3916 / NEW 6-7-12
TECHNICAL SPECIFICATIONS
MODELS
Transmitter
Compatible
Receiver
Fiber Optical
Connector Type
Number
of Fibers
Wavelength
Optical Power
Budget
Multimode (62.5/125 µm)
FTV10M1ST FRV20M2ST ST 1 1310 nm 12 dB 4 km (2.5 mi)
Single Mode (9/125 µm)
FTV10S1ST FRV20S2ST ST 1 1310 nm 16 dB 54 km (33.6 mi)
FTV10S1FC FRV20S2FC FC 1 1310 nm 16 dB 54 km (33.6 mi)
Note: This product requires a fiber installation with a minimum 30 dB connector return loss.
*Transmission distance will be diminished if additional losses are introduced by the optical connectors, splices, and
other factors regarding the quality of the fiber. The operating distance of multimode is limited by the characteristics
of the fiber bandwidth.
Maximum
Transmission
Distance*
VIDEO
Number of Channels 1
Video Input 1.0 Vp-p, 75 ohms; NTSC, PAL, SECAM
Overload >1.5 Vp-p
Bandwidth (minimum 5 to 10 MHz
Differential Gain <2%
Differential Phase <0.7°
Tilt <1%
Signal-to-Noise Ratio >67 dB typical at maximum optical loss
Max. Coaxial Cable (RG59) 100 m (300 ft) camera to fiber optic module to
maintain 6 Mhz bandwidth
ELECTRICAL
Power
Surface Mount 8 to 15 VDC at 2 W
Rack Mount Provided by rack
MTBF >100,000 hours
Current Protection Automatic resettable solid-state current
limiters
Circuit Board Meets IPC standards
LED Indicators Video, Link, Power
MECHANICAL
Connectors
Power Terminal block
Optical ST or FC
Video BNC (gold-plated center pin)
Number of Rack Slots 1
GENERAL
Dimensions 15.5 × 13.5 × 2.8 cm
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0 to 95%, noncondensing
Unit Weight 0.34 kg (0.75 lb)
Shipping Weight 0.90 kg (2.00 lb)
CERTIFICATIONS/RATINGS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control
equipment environmental standards
†
At the time of this printing, all certifications are pending. Please
consult the factory, our Web site (www.pelco.com), or the most
recent B.O.S.S.
®
update for the current status of certifications.
(6.1" D × 5.3" W × 1.1" H)
†
RECOMMENDED ACCESSORIES
EURACK 4 RU rack accessory with European power
USRACK 4 RU rack accessory with North American
FEXTPS Fiber External Power Supply with multiple
supply
power supply
plug adaptors (North American, Australian,
United Kingdom, and European);
100 to 240 VAC, 50 to 60 Hz input,
9 VDC output
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com
Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the prope rty of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2012, Pelco, Inc. All rights reserved.
Loading...