ESPRIT ANTI-CORROSION PTZ CAMERA
2 MP
The Esprit Anti-Corrosion PTZ is a corrosion-resistant Day/Night Pan-Tilt-Zoom (PTZ) camera with 40x zoom and full 1080p
resolution to accurately identify details in dark environments. Designed with AISI 316L stainless steel and micro-shot
peened, electro-polished surfaces, it offers maximum resistance in corrosive environments, ideal for effective video
monitoring in offshore/onshore marine environments and for ports and roadways. In addition, the Esprit Anti-Corrosion PTZ
offers IP66/IP67/IP68/IP69 certifications and a NEMA Type 4X rating, ensuring protection against extreme conditions,
including water and dust.
FEATURES
RUGGED CONSTRUCTION
AISI 316L stainless steel with micro-shot peened, electropolished surfaces offer maximum corrosion resistance.
WIDE DYNAMIC RANGE & LOW LIGHT COMPENSATION
Offers excellent image detail in contrasting light and shadows.
LLOYD'S REGISTER MARINE TYPE APPROVAL
Obtained Lloyd's Register Marine Type Approval for the
maritime and shipping sector.
PEACE OF MIND
We back this camera with a 3-year industry-leading warranty.
WEATHER RESISTANT
Rated NEMA Type 4X and IP66/67/68/69 for water,
corrosion and dust resistance.
HIGH-TEMPERATURE RANGE
Optimized to operate reliably even at increased
temperature variances: from -40°C (-40°F) up to +65°C
(+149°F).
ONVIF® COMPLIANT
ONVIF Profile G, M, S and T compliance allows for easy
integration with existing ONVIF infrastructures. Integrates
with Pelco VideoXpert and other leading video
management systems.
ONVIF is a trademark of Onvif, Inc.
SPECIFICATIONS
IMAGE PERFORMANCE 2.0 MP
Image Sensor 1/2.8" progressive scan CMOS
Active Pixels (H x V) 1937 (H) × 1097 (V)
Imaging Area (H x V) 5.568 mm (H) × 3.132 mm (V); 0.219 ” (H) × 0.123 ” (V)
Minimum Illumination
Dynamic Range 120 dB
Image Rate Up to 60 fps
Aspect Ratio (Resolution Scaling) Down to (16:9) 384×216 or (5:4) 320×256
3D Noise Reduction Filter Yes
LENS 2.0 MP
Lens 4.25 to 170 mm, F/1.6 – F/4.95, autofocus
Angle of View
Zoom Up to 40x
Horizontal 66.35° - 1.9°
Vertical 39.99° – 1.11°
IMAGE CONTROL 2.0 MP
Video Compression H.264 and H.265 Pelco Smart Compression, Motion JPEG
Streaming Multi-stream H.264, Multi-stream H.265, Motion JPEG
Motion Detection Pixel motion: Selectable sensitivity and threshold. Classified object detection
Electronic Shutter Control Automatic, Manual (1/1 to 1/10,000 sec)
Iris Control Automatic, Open, Closed
Day/Night Control Automatic, Manual
Flicker Control 60 Hz, 50 Hz
White Balance Automatic, Manual
Backlight Compensation On/Off
Privacy Zones 3D, up to 64 zones
Presets 500 named presets
Tours 10 named tours
Electronic Image Stabilization Yes
Digital Defog Adjustable/Off
0.03 lux (F/1.6) in color mode; 0.02 lux
(F/1.6) in monochrome
NETWORK
Network 10BASE-T/100BASE-T
RJ-45 port
SFP slot
ONVIF ONVIF compliance Profile G, Profile M, Profile S and Profile T (www.onvif.org)
Security
support@pelco.com|pelco.com 2
Cabling Type CAT5e/CAT6 shielded (STP) Ethernet cable is required to fully comply with EMC regulatory standards
Connector RJ-45
Network 100BASE-FX
Supply voltage 3.3V
1
Standard MSA compliant
Safety requirements Laser: Class 1, complies with EN60825-1. Certification: UL/IEC 60950-1 or UL/IEC 62368-1
Password protection, HTTPS encryption, digest authentication, WS authentication, user access log, 802.1x port based
authentication
NETWORK
Protocols IPv6, IPv4, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv2, ICMP, DHCP, Zeroconf, ARP, HSTS
Streaming Protocols RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP, RTP/RTSP/HTTP/TCP, RTP/RTSP/HTTPS/TCP, HTTP
Device Management Protocols SNMP v2c, SNMP v3
1
SFP module not supplied.
PERIPHERALS
Audio Input/Output None
External I/O Terminals 1 Alarm In, 1 Alarm Out, 1 Washer pump Out, 1 Remote reset In
Onboard Storage MicroSD/microSDHC/microSDXC slot – video speed class card required. Class V10 or better recommended.
MECHANICAL
Dimensions (LxWxH) 330 mm x 220.5 mm x 480 mm; 13" x 8.7" x 18.9"
Camera Weight 22.8 kg; 50.3 lbs
Glass Window 5 mm thick (0.2")
Body AISI 316L stainless steel
Housing Pendant and pedestal mount
Finish External surfaces micro-shot peened and electro-polished
Tilt -90° to +90°, up to 100°/second
Pan 360°, endless, up to 100°/second
Accuracy of preset positions 0.02°
Dynamic positioning control system Yes
ELECTRICAL
Power Consumption 120 W max. 30 W, P&T static, heating switched off
Power Source
Multipolar Cable 3 m; 118"
RTC Battery Backup None
220-230 VAC ±10%, 0.5 A max, 50/60 Hz
120 VAC ±10%, 1 A max, 50/60 Hz
24 VAC ±10%, 5 A max, 50/60 Hz
ENVIRONMENTAL
Operating Temperature Continuous operation from -40 °C to +65 °C (-40 °F to 149 °F)
Storage Temperature -40 °C to +70 °C (-40 °F to 158 °F)
Humidity 5% - 95% non-condensing
Cold Start Up to 135 minute startup delay at temperature lower than -10 °C (14 °F)
CERTIFICATIONS
Certifications/Directives UL (24 VAC only), cUL (24 VAC only), CE, UKCA, ROHS, LR, RCM
Safety UL 62368-1, CSA 62368-1, IEC/EN 62368-1
Environmental and Performance
Electromagnetic Emissions FCC Part 15 Subpart B Class A, IC ICES-003 Class A, EN 55032 Class A, EN 61000-6-4, EN 61000-3-2, EN 61000-3-3
Electromagnetic Immunity EN 55035, EN 50130-4
Lloyd's Register Marine Type Approval
certification
Warranty 3-year limited warranty. 5-year extended warranty is available.
UL/CSA/IEC 60950-22, IEC 62262 IK10 Impact Rating (enclosure only), IEC 60529 IP66, IP67, IP68, IP69 Weather Rating,
IEC 60068-2-1, IEC 60068-2-6, IEC 60068-2-30, IEC 60068-2-14,
NEMA TS 2 para 2.2.7 - 2.2.9, Type 4X (24 VAC only), MIL-STD-810-H
Test Specification Number 1 (ENV1, ENV2, ENV3, ENV5)
Electromagnetic compatibility: EN60945 (24 VAC requires the accessory filter FM1010 or PEC-COMBxxx)
Environmental: IEC 60068-2-78
Tested at 70°C (158°F) for 16 hours in compliance with EN60068-2-2
support@pelco.com|pelco.com 3
ANALYTICS SPECIFICATIONS
SUPPORTED ANALYTICS EVE NT S*
Objects in Area The event is triggered when the selected object type moves into the region of interest.
Object Loitering The event is triggered when the selected object type moves into the region of interest, then stays for an extended amount
Objects Crossing Beam
Object Appears or Enters Area The event is triggered by each object that enters the region of interest and can also be used to count objects.
Object Not Present in Area The event is triggered when no objects are present in the region of interest.
Objects Enter Area The event is triggered when the specified number of objects have entered the region of interest.
Objects Leave Area The event is triggered when the specified number of objects have left the region of interest.
Object Stops in Area The event is triggered when an object moves into a region of interest and then stops moving for the specified threshold
Direction Violated The event is triggered when an object moves in the prohibited direction of travel.
Sabotage Detection The event is triggered when the scene unexpectedly changes.
*
Pelco Smart Analytics powered by Motorola Solutions.
of time.
The event is triggered when the specified number of objects have crossed the directional beam that is configured over
the camera’s field of view. The beam can be unidirectional or bidirectional.
time.
OUTLINE DIMENSIONS
ESPRIT ANTI-CORROSION PTZ CAMERA
(ESSE1-2X40-SPT-M2, ESSE1-2X40-SPT-AC, AND ESSE1-2X40-SPT-M1)
[X.X] INCHES
X MM
support@pelco.com|pelco.com 4
ORDERING INFORMATION
PTZ CAMERAS
SUPPLY VOLTAGE
ESSE1-2X40-SPT-M2 220-230 VAC
ESSE1-2X40-SPT-AC 24VAC
ESSE1-2X40-SPT-M1 120VAC
PTZ CAMERA ACCESSORIES
ACCESSORY
PEX-MPXWBA AISI 316L stainless steel wall bracket.
PEX-MPXWBTA AISI 316L stainless steel parapet or ceiling mounting bracket.
PEX-MPXCOL Pole mount adapter. For pole diameters from 110 mm (4.3”) to 150 mm (5.9”). Max load 50 kg (110 lb.). AISI 316L stainless
PEX-MPXCW Corner mount adapter. Max load 50 kg (110 lb.). AISI 316L stainless steel.
PEC-WASPT0V5L5M00 Washer 5I, 5m, 230 VAC-24 VAC-120 VAC.
PEC-WASPT0V23L11M00 Washer 23l, 11m, 230 VAC-24 VAC-120 VAC.
PEC-WASPT1V23L30M00 Washer 23l, 30m, water float, 230 VAC.
PEC-WASPT3V23L30M00 Washer 23l, 30m, water float, 120 VAC.
PEC-COMB100A Comm. box, w PS & Switch, 220-230 VAC.
PEC-COMB200A Comm. box, w PS & Switch, 24 VAC.
PEC-COMB300A Comm. box, w PS & Switch, 120-127 VAC.
WASNX1V10L20M00 Tank 10l (2.6gal) with integrated manual pump, controlled by solenoid valve, IN 230 VAC, delivery head up to 30m (98ft),
WASNX2V10L20M00 Tank 10l (2.6gal) with integrated manual pump, controlled by solenoid valve, IN 24 VAC, delivery head up to 30m (98ft), with
WASNX3V10L20M00 Tank 10l (2.6gal) with integrated manual pump, controlled by solenoid valve, IN 120 VAC, delivery head up to 30m (98ft),
FM1010 EMC filter for Marine certification.
NXPTZSFP Adaptor for connection of fiber optics.
DESCRIPTION
steel.
with 20m (66ft) antistatic water delivery pipe.
20m (66ft) antistatic water delivery pipe.
with 20m (66ft) antistatic water delivery pipe.
SUPPORT
Learn more and find additional documentation at pelco.com or email support@pelco.com for specific product support.
Feb 2023| C5068S| Rev 1
© 2023 , Motorola Solutions, Inc. All rights reserved. MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC and are used under license. Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco,
Inc. or its affiliates. All other product names and services are the property of their respective companies. Product specifications and availability are subject to change without notice.
support@pelco.com|pelco.com 5
Loading...