Pelco CC3600 User Manual

®

Installation/Operation

CC3500/CC3600 Series
Color Cameras

C1981M-C (8/02)

Pelco World Headquarters • 3500 Pelco Way, Clovis, CA 93612-5699 USA • www.pelco.com

USA & Canada: Tel: [phone] • Fax: [phone]

International: Tel: [phone] • Fax: [phone]

[ 2 ] Pelco Manual C1981M-C (8/02)

CONTENTS

IMPORTANT SAFEGUARDS AND WARNINGS ................................................................................. 4

Regulatory Notices ............................................................................................................................... 5

DESCRIPTION .................................................................................................................................... 5

Models ................................................................................................................................................. 5

CAMERA LAYOUT ............................................................................................................................... 6

INSTALLATION .................................................................................................................................... 6

Lens Mounting ..................................................................................................................................... 6

Camera Mounting ................................................................................................................................ 7

POWER AND VIDEO CONNECTIONS ............................................................................................... 8

POWER CONNECTIONS .................................................................................................................... 8

LENS SETUP AND FOCUS PROCEDURES .................................................................................... 10

BACK FOCUS ADJUSTMENT...........................................................................................................11

SWITCH SETTINGS .......................................................................................................................... 12

CAMERA SYNCHRONIZATION ........................................................................................................ 14

SPECIFICATIONS ............................................................................................................................. 15

WARRANTY AND RETURN INFORMATION .................................................................................... 16

LIST OF ILLUSTRATIONS

Figure 1. Camera Layout .................................................................................................................... 6

Figure 2. DD/AI Lens Connector ......................................................................................................... 7

Figure 3. Camera Mounting ................................................................................................................ 7

Figure 4. Power Supply Connections .................................................................................................. 8

Figure 5. AGC and EI Switch Settings .............................................................................................. 10

Figure 6. Back Focus Adjustment ..................................................................................................... 11

Figure 7. Switch Settings .................................................................................................................. 12

LIST OF TABLES

Table A. Recommended Wire Gauge and Wiring Distances............................................................... 9

Table B. Video Coaxial Cable Requirements ......................................................................................9

Pelco Manual C1981M-C (8/02) [ 3 ]

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

9. Only use attachments/accessories specified by the manufacturer.

10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi­nation to avoid injury from tip-over.

11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, the apparatus does not operate normally, or the apparatus has been dropped.

12. Apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such
as vases, shall be placed on the apparatus.

13. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.

14. Caution: Danger of explosion if battery is replaced incorrectly. Replace only with the same or
equivalent type.

15. To reduce the risk of shock, do not perform any servicing other than that contained in the oper­ating instructions unless you are qualified to do so.

16. Use only installation methods and materials capable of supporting four times the maximum
specified load.

17. Use only UL listed class 2 power supply.

18. DD/AI Lens Connector

The maximum load for a direct drive lens must not exceed 25 mA.
The maximum load for an auto-iris lens must not exceed 50 mA.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.

This symbol indicates that there are impor­tant operating and maintenance instructions

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

in the literature accompanying this unit.

Please thoroughly familiarize yourself with the information in this manual prior to installation and
operation.

[ 4 ] Pelco Manual C1981M-C (8/02)

REGULATORY NOTICES

This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However there is no guarantee that the interfer­ence will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device many not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

DESCRIPTION

The CC3500 and CC3600 Series are compact, color video cameras with a 1/3-inch CCD imager.
All cameras have a direct drive/auto iris lens connector and adjustable back focus, and they accept
C and CS lenses.

Models

CC3500S-2 Standard resolution, 330 TV lines, HyperHAD™ CCD, 1.0 lux at f1.2, NTSC
CC3500H-2 High resolution, 480 TV lines, HyperHAD CCD, 1.0 lux at f1.2, NTSC
CC3600H-2 High resolution, 480 TV lines, EXview HAD CCD™, 0.6 lux at f1.2, NTSC
CC3500S-2X Standard resolution, 330 TV lines, HyperHAD CCD, 1.0 lux at f1.2, CCIR
CC3500H-2X High resolution, 480 TV lines, HyperHAD CCD, 1.0 lux at f1.2, CCIR
CC3600H-2X High resolution, 480 TV lines, EXview HAD CCD+, 0.6 lux at f1.2, CCIR

Pelco Manual C1981M-C (8/02) [ 5 ]