Pelco Calipsa Integration Guide — Mobotix
Calipsa® Mobotix Integration
User Guide
Document number:C6741M
Publication date:03/23
C6741M | 03/23 1
Calipsa® Mobotix Integration User Guide
Table of Contents
Introduction 3
Mobotix 3
Adding a Mobotix Camera to Calipsa 3
Creating a Site 3
Adding a Camera 3
Configuring a Mobotix device 4
Setting up an Email Profile in Mobotix 6
Troubleshooting Questions 8
Adding your Monitoring Station SMTP Details 10
Accessing Calipsa Account Settings 10
Editing Global Configuration 10
Inputting Your Credentials 11
C6741M | 03/23 2
Calipsa® Mobotix Integration User Guide
Introduction
This guide covers the steps required to integrate your Mobotix cameras with the Calipsa platform. Other
common integration steps, such as configuring your system to send alarms to your gmail account are
also covered.
Mobotix
Adding a Mobotix Camera to Calipsa
This guide outlines the manual process of configuring a Mobotix camerato send email alerts to Calipsa.
Creating a Site
1. Under Add sites, enter the Site Name.
2. When asked is this a DVR/NVR site, select No.
3. Click Add site.
Adding a Camera
1. After creating the site, click add camera in the left-hand tree.
C6741M | 03/23 3
Calipsa® Mobotix Integration User Guide
2. Under Camera name, enter the camera's name.
3. Under Notification email,enter theemail address where you would like these alarms to be sent to
e.g., Immix S-number, Gmail address, etc.
4. Click Add camera.
Configuring a Mobotix device
1. Under Configuration, click Edit.
C6741M | 03/23 4