Peerless-AV PE0342 Installation Instructions

Installation and Assembly - VCR Mount for PM 1327

IMPORT ANT! Read entire instruction sheet before beginning installation and assembly.

This product is UL Listed.

R

INSIDE DIMENSIONS VCR DIMENSIONS

WIDTH (W) HEIGHT (H) MAXIMUM MINIMUM

13" - 17.5" 3" - 4" 17.5" x 4" 13" x 3"

(330 mm - 445 mm) (76 mm - 102 mm) (445 mm x 102 mm) (330 mm x 76 mm)

Parts List PM 47 PM 47W PM 47S
Description Qty. Part Number Part Number Part Number

A horizontal bracket 2 081-1041 081-2041 081-4041
B lower bracket 2 081-1040 081-2040 081-4040
E screw 4 520-9504 520-9406 520-9406
G adhesive foam 2 570-0022 570-0023 570-0022
H 1/2" sae washer 1 540-1007 540-2007 540-2007

In the U.S.A. this product is intended
for use with UL Listed VCRs only.

Maximum Load Capacity: 35 lb (16 kg)

Models: PM 47, PM 47S, PM 47W

W

H

Check parts list. Be sure all parts listed are included with your product.

SPRING
PLATE

WARNING

A

B

E

H

G

• Some styles of TV mounts include a spring plate as
shown, some do not include it. If your product had a
spring plate, you will not use it when attaching the
VCR mount.

ISSUED: 05-05-00 SHEET #: 081-9021-3 08-30-041 of 4

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

Assemble and attach VCR Mount to TV Mount as shown. Leave screws (E) and lock nut slightly loose to allow for
adjustment. *Note: Bolt, nut, and washer will be reused from TV mount installation.

Attach adhesive foam (G) to inside
vertical edges of lower brackets (B).

*

A

B

G

A

H

G

A

B

*

G

E

B

Adjust VCR Mount to slightly larger than VCR

F

and insert VCR. Position VCR so front is flush
with front of TV support tray (part of TV Mount).
T o avoid scratches, leave some clearance
between top of VCR and VCR Mount. Compress
sides of VCR Mount to "grip" sides of VCR.

E

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.

Tighten four screws (E) and lock nut. For best
results have an assistant compress sides of
VCR mount against sides of VCR while you
tighten lock nut.

ISSUED: 05-05-00 SHEET #: 081-9021-3 08-30-042 of 4