Installation and Assembly - Multi-Channel Speaker Mount
for Boston Acoustics P400 or Polk Audio Center Channel
IMPORTANT! Read entire instruction sheet before you start inst allation and assembly .
Parts List
MSA-101 MSA-101S
DESCRIPTION QTY . PART # PART #
A center speaker mount 1 087-1041 087-4041
B interface bracket 1 087-1047 087-4047
C speaker attachment bracket 2 087-1042 087-4042
D M5 x 6 mm socket pin serrated 4 510-1114 510-1114
washer head screw
E M5 x 10mm socket pin screw 1 520-1063 520-1063
F spacer 1 540-1032 540-1032
G 1/4 x 1.5" hex bolt 2 520-1096 520-1096
H 1/4" flat washer 2 540-9440 540-9440
I 3/8 x 1" bolt 2 520-1242 520-1242
J flat washer 2 540-9407 540-9407
K tear drop locking tab 1 200-1871 200-1871
L 4 mm security allen wrench 1 560-9646 560-9646
I
G
Models: MSA-101,
MSA-101S
MAXIMUM LOAD CAPACITY :
25.00 lb (11.4 kg)
A
Note: some parts may not appear exactly as illustrated.
B
H
J
K
F
D
C
L
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
E
1 of 4
ISSUED: 12-19-05 SHEET #: 087-9013-4 05-10-06
Slide speaker attachment brackets (C) onto center speaker (A) mount as shown below.
1
C
A
C
Installation with adapter plate
2-1
Loosen screws on plasma adapter. Then place interface bracket (B) between plasma adapter and mount. Tighen
screws on plasma adapter securly. Refer to adapter plate instructions for installation of screen.
Skip to step 3.
PLASMA ADAPTER
Note: some parts may not
appear exactly as illustrated.
MOUNT
B
2 of 4
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
ISSUED: 12-19-05 SHEET #: 087-9013-4 05-10-06
Installation directly to screen
2-2
Place interface bracket (B) between screen and mount. Attach interface bracket (B) to mount and screen using fasteners provided with mount. Refer to mount instructions for installation of screen. Tighten all screws securly.
Note: For installation of tear drop locking tab (N) reference SP-850 instruction sheet.
Note: Roll can be adjusted 1° clockwise
or counterclockwise. To adjust roll,
loosen screen fasteners slightly, leaving
them snug. Level screen, then tighten
screen fasteners.
SCREEN
Note: some parts may not
appear exactly as illustrated.
MOUNT
B
Attach interface bracket (B) onto center speaker mount (A) using four M5 x 6 mm socket pin serrated washer head
screws (D). Adjust form brackets to best fit your screen size. Tighten screws using 4 mm security allen wrench (L).
3
Note: For best results use holes closest to the edge of the form brackets as shown below.
Note: Adapter plate, screen, and mount not shown for clarity .
B
D
A
3 of 4
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
ISSUED: 12-19-05 SHEET #: 087-9013-4 05-10-06
Attach speaker to center speaker bracket (A) using two screws (I or G) and two washers (J). Adjust the speaker
4
attachment brackets (C) to desired location and tighten screws.
Note: For Boston Acoustics speakers use two 3/8 x 1" bolt (I) for Polk Audio use two 1/4 x 1.5" hex bolt (G).
I or G
Note: Interface bracket not
shown for clarity.
A
C
J
4 of 4
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
© 2006 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED: 12-19-05 SHEET #: 087-9013-4 05-10-06
Loading...