TC6063OI Rev. AD 1/08 ©2008 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp.
All Rights Reserved.
AC ADAPTER OPERATING
INSTRUCTIONS
The Monarch® 6063™ AC Adapter provides continuous power to your
Monarch® Pathfinder® Ultra® Silver 6032™ and the Monarch®
Pathfinder® Ultra® Platinum 6039™ printers. You can use the adapter
instead of a rechargeable battery. The adapter plugs into any standard
grounded electrical outlet and allows you to print large volumes of labels
without switching or recharging the battery.
Kit Contents
The AC Adapter kit comes with
♦ a new battery compartment door with a notch in it.
♦ a power cord (domestic models only).
♦ an adapter pack.
♦ a power supply.
Power Supply
Power Cord
New Door
Adapter Pack
2 Installing the Adapter
Installing the Adapter
To install the adapter:
1. Press the button on the battery compartment door (located at the
bottom of the printer’s handle) and slide it open, pulling firmly. Pull
the door completely off the printer and lay it aside.
2. Pull the battery out of the compartment. Or, place your hand beneath
the printer, turn the printer upright, and catch the battery in your hand
as it slides out.
3. Insert the adapter pack (connector end first) into the printer’s battery
compartment.
Battery
Compartment
Door
Button
Battery
Loading...